6gun's latest activity

One can also ( In this case the probe portion of end cap on a BSA Scorpion ) machined it off then drill & tap for a foster. In this...

If you have an industrial hardware store locally or mail order, hydraulic fittings are an easy way to go for pressure ratings. Then...

The "T" in this case was a custom I fabricated using 7075 aluminum rod. ( Have a small machine shop at home )

Beautiful setup with Custom Tee. Allows 3 different threads to exactly match available fititngs/threads. This is actually what I was...

As long as the threads are right and it has a check in it, it should work fine.

It's a personal flaw of mine. I have so much data spinning around upstairs that I will write you a phone book page or forget stuff...

Totally agree with you. You are taking for granted how much you already know. How do we point people in the right direction without...

I try to leave just enough info that people have to go research themselves and find out the minutia without having to spoon feed. It's...

If it was a Tee you could have gauge on the other side. By the way, 1/8 NPT in everything only if you retap the threads and have enough...

I cut a small piece of tape and cover the pressure gage beyond the cutoff point

1/8 pipe. Npt, bsp and very occasionally 1/8g. They're all really similar and I've been known to stick 1/8 npt in everything...

You can put a 3 way tee and have both.

I've worked hard to standardize to a certain degree. I've got pcp guns with 250 bar fill and 138 bar fills. Each gun type has its...

That's a big one. Legos kind of have to be re seated from the foundation.

When you fall with a gun made out of a bunch of pieces, it can now be on a bind. Sometimes you have to relax more than just the barrel...