6gun's latest activity

There is nothing worse than hitting the deck with $3k+ gun and scope. I don’t even like to talk about it.

Yep. But there’s a little more work involved than just a wham bam machine job. The greatest barrel can still have you chasing slugs and...

That's what I use, the felt buttons with a hole thru the middle soaked lightly in Ballistol then rubbed in paper towels to remove excess...

Op lit a fire under me to make sure im not selling bologna. Got the impact out I haven't touched in months except tipping it over in...

I just bought 2 of the 4-16 versions sometime apart with Japanese glass. They beat the snot out of my leupolds and are darn near as...

I have that exact same Arken 6-24 sh4 gen2 on my bench rifle. I picked it up for around $360 or so over a year ago. Definitely a bargain...

Fwiw I'm not being combative or contrarian to op, I've just already walked this road. In the beginning silicone lube on barrel points...

That multi piece rail on all impacts before the m4 is a problem there. Mine was too.

I dig the specificity, next project might be machining an lw blank myself but polyagonal

In being specific ... used a barrel off a STEYR LG-110FT Best we know there high grade LW's. was a 12g choked 16mm diameter.

You can put your trigger block in the mill and go up a cap screw size for some minimal improvement like I did. The 700 not only shifts...

Need to figure how you can consistently tighten the liner nut. Here is one tool, also a digital torque driver will help.

Did you ever just consider a better hunting gun. There are quite a few guns out there that the barrel and POI issues are not even...

I've been astonished by arken. I'm hoping to sell my vortexs, leupolds and weavers to fund replacing most of the with arkens at this...

I got Element Helix mixed up with Aztec Emerald, so I have the Aztec 5.5-25x50....Then I found my Sightron Stac 4-20x50, followed by my...