Call Martin @ AirgunsUSA (931) 638-0241 leave a message with phone number if no one picks up and he always returns your call.
Upvote 0
RAW Rapid HM1000X External Plenum
- Thread starter dreamweaver
- Start date
I use the RAW plenum (available by calling RAW on the phone) on my high power rifles. I shoot 40gr slugs in .22 with 185bar reg at 980fps, 34grpellets in .25cal with 120bar reg at 930fps, and 44 or 56gr pellets in .30cal with 145bar reg at 880fps. I don't shoot slugs out of my .25 or .30cal rifles, so I cannot say if you can accurately shoot .30cal slugs out the RAW, but all of my rifles are very accurate shooting slugs or pellets as mentioned.
Upvote 0
If you have the LRT with the MASSIVE shroud and moderator then a plenum may not work unless you use a smaller shorter length bottle. The stock bottle only has a small amount of space from the end of the bottle to the shroud. Add the plenum and the bottle hits the shroud.
Upvote 0
I have a chassis raw with multiple barrels the moderater/silencer is not in the way. I was just wondering what the internal volume in CC is of the ATS plenum. The Raw is 35 or 45 cc
Upvote 0
Vertical plenums work great for me. With my high efficiency valve and anti hammer bounce device, things move to another level.
Upvote 0
I know but your vertical plenums require stock/chassis modifications and I am not willing to do that.
An inline one doesn't need modifications, I have a 20 cc inline plenum and it's gives good results.
Was just wondering what the size is of the ATS plenum.
An inline one doesn't need modifications, I have a 20 cc inline plenum and it's gives good results.
Was just wondering what the size is of the ATS plenum.
Upvote 0