Ron, really appreciate your response and insight! It was super helpful and pragmatic.I could write lots on the recent patterns to the droop on the 50s and 95s. The 50s didnt show with significant droop until 2022. I never determined the reason past machining dimensions. I just adjusted the barrelsr.
95s started to be plagued with droop and around 2019 and they seem to have gotten handle on it around 2023. The cause was usually a binding cocking arm. Putting a slight bend in the cocking arm fixes that. I've fixed at least 7 or 8 of them.
The 50s machining errors can be addressed with a droop compensation scope mount. Most of them are one piece and limit your scope option. I just bend the barrel close to optical center.
The 95s need the cocking arm fixed because it can cause vertical stringing from inconsistent lock up.
Pm me for my phone number if you want details.
Just get the gun you want. It's unlikely to have droop. And droop isnt fatal if it does.
Oh btw 77s and 97s often have droop and or sweep. So there's no guarantee with them either.
Good luck
Ron
Upvote 0