I don't know about the Notos but the pp750 mags suck, at least mine did. I bought spare mags from Wes at Airgunarcheryand fun the ones that have a maple leaf on them. The frame on the pp750 can twist some but I did my own mod.
Upvote 0
N/A Notos or pp750
- Thread starter Jezter6
- Start date
Yes, they are really bad both for Notos and PP750. Best to throw them away and buy some from Carm or Maple Custom. They are better in every way and cheaper than the original here in the Netherlands at least.
Upvote 0
I've shot at least 2500 pellets through the original magazines and have had no problems whatsoever. 
Upvote 0
Even though you had no problems, you could have saved yourself quite some time reloading the mags. Carm has high capacity mags with 12 pellets and they're much easier and faster to load. I haven't had a problem with the original mag of the PP750 but the Notos mag was jamming from the first pellet, straight from the box.I've shot at least 2500 pellets through the original magazines and have had no problems whatsoever.
Upvote 0
FWIW - I picked up an already converted by @Firewalker Notos with bottle here on the classifieds, expect it to be in next week.
Upvote 0
For me it's the same, both has some very minor issues that are very easy to address. With after market support, it's the new Lego gun out there. A few of mine with my mods before any after market was available. Long guns are .177 and pistol in .22.
Upvote 0
Can I ask where you git that folding stock from . It's not one iv seen b4, dud it came complete as as a kit ?. Cost if you don't mind the wife finding out ?. CherrsI really like my PP750, but as stated earlier the goodies are a black hole.
View attachment 463019
Ah well... I'm all ready to do some target practice.
View attachment 463020
Upvote 0
Current sporting a 460mm barrel off of an M-16. Rather pointless though so going to cut that back. An old Yukon IR ontop for use on the rats.
Shroud is a mix dia one to fit the puff, coupled with the LDC works rather well.
Giving thought to a sorts of drop block just one that heads the bottle backwards, in vs the trigger guard. Using a 200cc bottle off of a BSA R-10.
That´d sum it to a smidge over 260cc´s total which would do it me thinks.
No.
Nothing special apart from that. Slight porting done, which turned out to be rather effective, the thing comes to a stand still around 50J/37fpe current approx. Neat little ratter, but as stated barrel needs to come back a bit.
Giving thought to 330 or there abouts. Think that would suit the concept way better.
Upvote 0