Epic Epic two regulator and valve.

Hi I m Bruno from spain. I own a Compact 300mm cz barrel Epic two since july. I m very happy with the first one I bought last year but no so much with the new one. I experimented since the beggining an issue that I couldn’t solve already. When I don’t use the gun for a couple of days the reg pressure increases Arround 10 bars and the first shots cannot open the valve. After this 3, 4 shots the gun starts to stabilize. I found some tunes where the spread was 5-10 fps or less. But always the first shot is higher Between the changing of magazine. For example if I chrono 22 shots the shot number 1 and number 12 are always some fps higher than the other 10 shots aviable on the magazin. After two days my fine tune is liar I don’t not why🤷🏼‍♂️I thought the problem was the regulator but I change it for a new one last week And it’s the same situation. I have doubts if the problem is the reg or the valve or both. Did you have some experience with this problem? Thanks and sorry for my english I don’t use translater I want to learn the language.😅😂

IMG_2077.jpeg



IMG_2076.jpeg


IMG_2234.jpeg


IMG_2235.jpeg
 
  • Like
Reactions: MACTEN
I suggest you contact Epic Airguns or the vendor you purchased the rifle from directly. Your second rifle may have been one of the earliest releases that did have a know regulator issue: not holding pressure when unused. I believe you have a warranty issue.
A new reg has been installed already … give it a bit of time to let it settle. Would be real bad luck to have 2 faulty regs.
 
  • Like
Reactions: MACTEN