AirForce has a limited number of unchoked threaded slug barrel Condor.
Airforce Condor Threaded Slug Barrel
- Thread starter Ratzy
- Start date
if anyone has a Condor the choke is about a inch long.. you can push a pellet through it and measure it. it's quite a tight choke.. you can cut it off and recrown the barrel in a lathe very easy..
if anyone wants one done.. PM me.. I do it as a hobby and to help others.. so your only cost is shipping each way.. and it's less money if you have pirate ship..
I want to say that I shot 22 caliber 40 grain slugs.. Zan and H&N and they both shot well out of my regular Condor and my Condor SS.
Mark
if anyone wants one done.. PM me.. I do it as a hobby and to help others.. so your only cost is shipping each way.. and it's less money if you have pirate ship..
I want to say that I shot 22 caliber 40 grain slugs.. Zan and H&N and they both shot well out of my regular Condor and my Condor SS.
Mark
Upvote 0
Very generous offer. Do you know how many thousandths the choke removes? I'm guessing it varies from .22 to .25.
Upvote 0
no I don't.. I liked the choke so I didn't remove it.. just a offer if someone wants something different.. all I would need is the barrel..
Mark
Mark
Upvote 0
The OEM .25 barrel on my Condor SS slugs out at 0.245 in the imparted grooves (so lands of the rifling) if pushed all the way through the choke. Tight choke. When stopping far short of the choke, no daylight can be see around the edges of slugs that are dropping out of the mold at 0.249.
LW reports a bore of 0.248 and grooves of 0.254 on their website, and no specs for a choke, but those stated specs always seem to be more of either a guestimate, or perhaps an average.
Upvote 0
So the choke is positioned in the last 1" of barrel at the muzzle? I'm considering getting a .25cal barrel and having it removed and threaded.
Upvote 0