What did you do airgun related today.

[Hateful McNasty]

There are 2 small character scratches in that shinny plastic looking coating , and some circular dents on the bottom nothing in the wood though. I was thinking of fixing them , but I learned not to when I was a Gunsmith. Besides I'd probably make them worse. I tried to download pic's

, but this phone keeps going to Drive , and not to files.?

Unless catastrophic its best to leave the guns character alone .

Maybe add a war story on how it got there .. lol

Like " son, this scratch was made hunting savage squirrel out back along thd western fence when one suddenly leaped at me and i had to defend myself.. .". Bully ..lol

 

[ZekeZX10]

Tested out the 10.03g JSB Knockouts Mk3 on a rabbit. I've been using 13.43g slugs which have been awesome as far as penetration but not expanding reliably...thought I'd give these another try and @ 25yards on the rabbit it expanded well and plenty of penetration...check out the slow motion and pics

Still testing .177 slugs....slow motion rabbit vital shot 25 yards

Rabbit @ 25 yards Daystate Pulsar HP .177 JSB Knockout 10.03g @ 1018 fps / 23 fpe Decided to test the 10.03g JSB Knockout MK3 one more time and at 25 yards got more than enough penetration and on inspecting the exit wound seemed to expand very nicely although I didn't recover the slug. I was...

www.airgunnation.com

 

[Avator]

I really dislike those super high gloss finishes. I prefer a more satin finish.

 

[Ratzy]

I really dislike those super high gloss finishes. I prefer a more satin finish.

Linseed oil, sand paper, linseed oil, sand paper repeat until happy.

 

[Hateful McNasty]

Most all mine have the well used and worn scratch and dent finish .

 

[Cpt_Willson]

I worked on these today. Karma Eq trigger guards with a lower pic rail. Not perfect yet, but this is the first one off the machine.

 

[OldVet]

Today I cleaned up my Diana 350 magnum. Pulled the stock cleaned out all the dirt , and oiled the blue , and lubes the dry spring. It came out nice will edit pic's asap

 

[JW.]

I worked on these today. Karma Eq trigger guards with a lower pic rail. Not perfect yet, but this is the first one off the machine.

View attachment 584260

Beautiful!! CNC?

I'm rebuilding the back end of my FT rig but i'm just on a standard milling machine...

 

[Cpt_Willson]

Beautiful!! CNC?

I'm rebuilding the back end of my FT rig but i'm just on a standard milling machine...

Yes sir. Its a 3 setup part. Two in a vice and one in the 4th axis.

 

[Vana2]

Was messing with the factory tune on my FX Royale 500 just tweaking the hammer spring settings a bit today.

The factory did a good job putting JSB Kings (25.39 gr) just off the knee averaging 888 fps, ES around 8 fps with 1/2 to 5/8 inch (ctc), 5 shot groups at 40 yards. The PCP falls off the reg at 120 bar.

A slight increase to 904 fps dropped the ES to 3 fps and the one group I shot was 3/8 inch ctc.

Looking encouraging

Will do some more testing at that setting to see of it's consistent.

 

[Hateful McNasty]

Final paint on twirler thing. All black or white got hard to see certin times of day ( irons st 50y) . This ( so far) white with black paddle seems to that stand out better ...

I like this twirler thing glad i made it up ..

so while paint was drying i scruffed some paint .

5 head shots each


I seemed to of missed once but could of swore i heard clanking 5 times .. oh well cant win them all i guess.

 

[Bigbaby]

I measured my fill probe on the DRS Tactical and 3D printed a cover. It’s tight on the metal next to the whip and secure, but loose at the orings. I’ll be putting it up on thingiverse later so others can download the model.