So what was your extreme spread and standard deviation post regulator replacement?
Last edited:
Upvote 0
Skout Everything Skout EVO and Epoch
- Thread starter MSR Workshop
- Start date
The string above was es of 3, sd of 1.3 I need to run a full shot string down to reg pressure to see what it’s really doing, but I’m hopeful.
Upvote 0
My Epoch seems to have taken a dive since I had the odd puff of air from the HP reg when adjusting, the power is definitely down a bit, and it seems more inconstant than before, I also had a go with adjusting the LP reg pressure which on the UK sub 12 guns is not adjustable, but I made an insert a while ago and tried winding the adjuster up and found it made little difference to the shots or the pressure in fact the pressure seemed to reduce slightly, going to have another look at the HP reg to see if there is anything that stands out like damaged O rings, but as a friend is going to the states soon I may ask him to grab me some spares, the next thing I may try is to open the poppet valve aperture as Motorhead has done and see if this has any positive effects.
Upvote 0
@Tricky-Dicky I would put money on it being an o-ring issue. I wouldn't make any modifications until that's sorted.
Upvote 0
So would I, however having already looked and not found anything IE o ring damage and I have already replaced some of the O rings with harder items I am not sure just what the cause is, I will be taking another look, but it's an odd one.
Upvote 0