What did you do airgun related today.
- Thread starter Florida_Man
- Start date
I plugged the pour hole on mine with a nail and dip pour with a ladle. I removed the pour handle.
Upvote 0
got new metric screws to replace one messed up threads on one so replacing all in a Diana zero mount .
New screws = 25 minute drive to hardware and 25 minute back home , up north at the old house this would have taken about 12 minutes walking . love to be out here in southern Kentucky ,would not trade for anything ( except maybe an indoor 50 yard range .)
New screws = 25 minute drive to hardware and 25 minute back home , up north at the old house this would have taken about 12 minutes walking . love to be out here in southern Kentucky ,would not trade for anything ( except maybe an indoor 50 yard range .)
Upvote 0
Sad.Upvote 0
Shot some 25.4 JSB in my Zelos with power tune too fast
965.3
970.0
966.4
954.4
958.6
982.8
Stopped there. That last one was 54.5 ft - lbs fpe. Wow good for a stock Zelos.
965.3
970.0
966.4
954.4
958.6
982.8
Stopped there. That last one was 54.5 ft - lbs fpe. Wow good for a stock Zelos.
Upvote 0
The Notos Huben drop block regulator started to creep so I decided to fix it, replaced the regulator with a spare I had sitting around, going to clean up the seat on the Delrin seal or relace it, I have plenty of stock rod Delrin to replace it with.
I also drilled the holes on the stainless cap to the size of my spanner wrench pins so it would be easier to remove.
I also drilled the holes on the stainless cap to the size of my spanner wrench pins so it would be easier to remove.
Upvote 0
About the only thig good from a gamo package scope is the mount .. it at least holds up for a long long time ..lol
This one hold zero good and as long as you tape the power on x7 it stays in focus ... Somewhat..
Its still deadly. I got shot posts using it on out there some ...lol
Upvote 0
I am breaking in my dream Notos reg combined with seeing shot count.
I also fixed the leak in my pp750 hopefully. 24 hour pressure test.
I also fixed the leak in my pp750 hopefully. 24 hour pressure test.
Upvote 0
Today , so far I drank some air gun coffee , and was looking at a Saguaro
Pronounced ( Saw War O ) by BRK , and the Sonoran also by BRK.
I'm from the Desert I wonder if they know to pronounce those right lol.
It's going to be 104°F that's 6 ft off the ground , and in the shade. Lol. Edit: it
was at Atlas Airguns.
Pronounced ( Saw War O ) by BRK , and the Sonoran also by BRK.
I'm from the Desert I wonder if they know to pronounce those right lol.
It's going to be 104°F that's 6 ft off the ground , and in the shade. Lol. Edit: it
was at Atlas Airguns.
Upvote 0
Finally , finally ! building a roll cart for my compressor , with a gun rack on top . Only 7 years late HAHAHA .
Using a HF small dolly for the base
Using a HF small dolly for the base
Upvote 0
Have not seen one talked about for minute on here was thinking about that yesterday. When you get done post a pic OldVet wants to see.
Upvote 0
Every other Friday I have to mow the field target course. But this now my workload is double.
Because I expanded the range to a practice range and a field target range and a bench rest range I now have my work cut out for me. With a 21 inch push mower it should be about 1 hour or so. Plus I spray paint all the permanent targets
It really looks good when it grows in. And after I cut it to get ready for the weekend.
Because I expanded the range to a practice range and a field target range and a bench rest range I now have my work cut out for me. With a 21 inch push mower it should be about 1 hour or so. Plus I spray paint all the permanent targets
It really looks good when it grows in. And after I cut it to get ready for the weekend.
Upvote 0
Continued my HM1000x pellet testing.
Only the AEA 33.9gr were consistent at 1700psi.
So I degassed and reset to 1400psi.
Will try testing again once it stops raining.
WTF, rain in California in July?
Only the AEA 33.9gr were consistent at 1700psi.
So I degassed and reset to 1400psi.
Will try testing again once it stops raining.
WTF, rain in California in July?
Upvote 0
you need a trailer for a ride on ,Very nice course ,you did a good job . reminds me " if you build it ,they will come !.
Upvote 0
I was zeroing in into my trap and suddenly the crosshairs canted a bit to the left. Scope wasn't loose; crosshairs no longer lined up with turrents.
Did a YT fix and it did not last. Tossed it.
Upvote 0
Ya, that one of 3 only held .. but like i said you got to tape down the power ring on 7 power . If you dont when you shoot the recoil causes it to turn to another power that not as in gocus as it is only at 7x .. lol.
Do ots pretty much gone from a 3-9 to a fixed 7x scope ..lol
Upvote 0