Is lubricating pellets necessary? I've read that people do it but am not sure if it's necessary or if it's better for certain sizes.
Is lubricating pellets necessary?
- Thread starter Ritzon5
- Start date
I am going to find out. I used to clean lube sort all that and I stopped .
I buy JSB pellets not crosman premier and stopped doing anything but shooting.
Now I’m in a position that has me shooting field target three or four days a week. I am cranking through some pellets. So I bought a bottle of oil. And I put a new tin of pellets in a bag with six drops of oil. Rolled them around and returned them to the tin.
Now I am going to shoot both a new tin with oil and a new tin without . Both from the same batch. Let’s see what happens.
I buy JSB pellets not crosman premier and stopped doing anything but shooting.
Now I’m in a position that has me shooting field target three or four days a week. I am cranking through some pellets. So I bought a bottle of oil. And I put a new tin of pellets in a bag with six drops of oil. Rolled them around and returned them to the tin.
Now I am going to shoot both a new tin with oil and a new tin without . Both from the same batch. Let’s see what happens.
Upvote 0
Above 950 fps youll get fouling you need to clean out. Lube reduces this fouling. Below 950 fps you do not get lead fouling.
Upvote 0
Blackpowder lead rounds have a grease groove. Copper jackets were needed for higher FPS without ridiculous fouling.
Upvote 0
Interesting. I don't recall us giving Napier permission to use us as a reference or to use our logo. Especially since we do NOT recommend lubing pellets.
Upvote 0
A little trademark infringement. Sounds like you have royalties or a lawsuit in your future.
Upvote 0
I like your idea . Six drops seems excessive to me . when i used to doo all that i used a microfiber cloth with a small squirt of lemon pledge on it to roll the pellets around in . My results were = no difference shooting,, but cleaner finger tips .
Upvote 0
No, we usually send our esteemed colleagues Alexei, Sergey, and Igor. They have a very, uh, "convincing" way of pointing out misconduct.A little trademark infringement. Sounds like you have royalties or a lawsuit in your future.
Upvote 0
I have a modified HFT 500.
Now that I have my own field target course permanently set up. I go to the range with what ever I’m up to. And always take my HFT and do a loop. This was last Sundays 84 shot loop. I missed six shots. But I am trying to hit the same spot on the kill zone paddle. So I can really how I’m doing.
Plus I am building a 100 yard benchrest lane. That will be finally set up this weekend .
And Sunday is a field target competition. So by Monday I should be able to see if there is any perceived difference or can I shoot an 84 shot loop and only miss three shots. That would be the 50% increase in accuracy that I am fully expecting based on the advertising .
Now that I have my own field target course permanently set up. I go to the range with what ever I’m up to. And always take my HFT and do a loop. This was last Sundays 84 shot loop. I missed six shots. But I am trying to hit the same spot on the kill zone paddle. So I can really how I’m doing.
Plus I am building a 100 yard benchrest lane. That will be finally set up this weekend .
And Sunday is a field target competition. So by Monday I should be able to see if there is any perceived difference or can I shoot an 84 shot loop and only miss three shots. That would be the 50% increase in accuracy that I am fully expecting based on the advertising .
Upvote 0
with everything that has been written and read here on AGN , Yes i still tried it myself . Best of luck . Let us know if you perceive any recordable difference .
Upvote 0
It will probably depend on the wind, sun, temp, Caffeine and bugs as to weather the lube makes any difference.
Upvote 0
Upvote 0
Perhaps you should give Alexei and colleagues more productive work in the factory. Apparently you are short staffed.
H&N comments and marketing lately have gone to pot, shame.
What time can I expect the visit from your esteemed colleagues? Something to look forward to from H&N.
Upvote 0