Airforce Testing 450gr in the tex-rex 50cal

[Cheplicki]

 

[The Archer]

He needs a level on the rifle! When watching the shots you can predict the point of impact befor trigger is pressed because the top line on his reticle was not aligned in the same spot for each shot at the 60., shots 2&3 accuracy is strictly a factor of the rifles cant. The accuracy of the rifle exceeds this mans capabilities.

 

[mercado]

I don't think is a rifle to be shot from a tripod . and if is a must , then atleast a muzzle break would have helped a bit .

 

[RM.510bigbore]

I don't think is a rifle to be shot from a tripod . and if is a must , then atleast a muzzle break would have helped a bit .

I,ve been hunting with my Texan .510 going on 5 years..My Big .510 does not shoot well off of tripod...A tripod has screw up some really good hunts.. The only sucess ive had at all with a tripod is using a dual tripod setup..With second tripod with yoke off rear of stock...Its the double recoil thing you have to hold on follow through ... My .510 Lother Walther barrel was terrible and lead heavily and would only shoot if i would clean every three shots...I hand lead lapped the barrel starting at 120 grit lapping coumpound then 240 grit, then 340 grit...My Barrel is now consistent and can go without cleaning..I use powder coated slugs and slick 50 lube...I would think Airforce would atl east pick a good barrel to send out for the You Tube reviewers.. If the .510 Tex does not end up shooting well..I will hand lead lap your barrel for you.. I used to work at ER Shaw barrels,, used to rough production grade barrels... I also use external regulator...For the new T rex at 4500 psi the CS4 GX compressor is working for me..I can fill my SCBA SCOTT tank 5.5 to 5500 psi and just regulate down to 4500 or for me 3625 psi for consistant easy shooting.. The GX CS4 has no problem filling my scba to 5500 psi...

 

[mercado]

I,ve been hunting with my Texan .510 going on 5 years..My Big .510 does not shoot well off of tripod...A tripod has screw up some really good hunts.. The only sucess ive had at all with a tripod is using a dual tripod setup..With second tripod with yoke off rear of stock...Its the double recoil thing you have to hold on follow through ... My .510 Lother Walther barrel was terrible and lead heavily and would only shoot if i would clean every three shots...I hand lead lapped the barrel starting at 120 grit lapping coumpound then 240 grit, then 340 grit...My Barrel is now consistent and can go without cleaning..I use powder coated slugs and slick 50 lube...I would think Airforce would atl east pick a good barrel to send out for the You Tube reviewers.. If the .510 Tex does not end up shooting well..I will hand lead lap your barrel for you.. I used to work at ER Shaw barrels,, used to rough production grade barrels... I also use external regulator...For the new T rex at 4500 psi the CS4 GX compressor is working for me..I can fill my SCBA SCOTT tank 5.5 to 5500 psi and just regulate down to 4500 or for me 3625 psi for consistant easy shooting.. The GX CS4 has no problem filling my scba to 5500 psi...

Thank you I really appreciate it.. I'm thinking on the 457 had one some years ago but sold it because of the lack of power that was before they bump the power on their CF version now it has even more, it will be fun to shoot such a hard recoil pcp .