When I had my 5G, I cut a strip of 0.5mm thick black plastic card the same width as the pointy front sight and glued it in front to square off the point.
Upvote 0
What pistol did you shoot today
- Thread starter Septicdeath
- Start date
Charles, just FYI if you find your barrel shroud coming loose (the set screw really isn’t adequate) you can epoxy it in place. I did that to mine.
Not sure about the M712 but real C96’s offered different barrel lengths. I’ve thought about getting a second one and modifying the length of the barrel and shroud. I extended the barrel and shroud on an old Crosman MK1 and it increased both the fps and accuracy. But for the M712 I might go the other way and shorten it since I’m often switching to full auto and aiming at targets within 5 yards
Last edited:
Upvote 0
I shoot the longer barrel HP version at the maximum 35 yard range in my backyard with a red dot and I’m always amazed with the bench rest accuracy of these pistols.Had a go with the Steyr LP50 Compact with MatchDot shootin the JSB 7.33 Match pellets. 25 yards standing offhand with 2 hand hold. Trying to unsee that 6
View attachment 569527
Last edited:
Upvote 0
Summer Christmas is favorite time of the year…Cuz you get 3 times as much…So let’s unwrap these presents and see what I got…look at that a Pair of S&W 79G and a 78G….can’t wait to see if they shoot as good as they look
Upvote 0
I check the list John and your somewhere in the middle…it’s usually a lump of coal if your bad or a Air condition if your good …tell you what …I will send over “ Door Dasher”..with this to help you with all your bills…“Mr Paperweight “…have fun..better luck next year…lol
Upvote 0
Letter…”Dear John”…Sorry about that…I have a touch of Alzheimer’s after being over a 1000 years old…I will send over Cupid
with a updated Marksmen with a lot more power if you think you can handle it…lolUpvote 0
I shot this two this afternoon, my Mk1 stubby and a Mk2 I just finished changing the piercing pin o-ring. A 2 minutes job turned to 2 hours when you use the wrong tool for the right job, lol. Bugger up up the threads using screw driver, just lazy to find the special tool I made for this. I'm waiting on a special die 7/8" x 20 threads so I can make a flush mount bulb/ piercing cap for the stubby.
Upvote 0
I shot this two this afternoon, my Mk1 stubby and a Mk2 I just finished changing the piercing pin o-ring. A 2 minutes job turned to 2 hours when you use the wrong tool for the right job, lol. Bugger up up the threads using screw driver, just lazy to find the special tool I made for this. I'm waiting on a special die 7/8" x 20 threads so I can make a flush mount bulb/ piercing cap for the stubby.
View attachment 571991
Very nice! I’ve always liked the MK1 and MK2 series.
Upvote 0