Hi just wanted to jump in and post a picture of a 5 shot group, shot at 100 yards, The green dot is 1/4-inch, with a Skout Epoch 35-inch barrel in .22 cal.
Upvote 0
Skout Everything Skout EVO and Epoch
- Thread starter MSR Workshop
- Start date
So I just had a little fun this morning and made myself some custom lasered metal lens caps for my scope.
Since my scope is made in Japan, I figured I would stick with a Japanese samurai design. I thought it turned out pretty good.
Since my scope is made in Japan, I figured I would stick with a Japanese samurai design. I thought it turned out pretty good.
Upvote 0
I may redo the first picture that’s the eyepiece lens cap because it’s a little hard to tell exactly what it is
Upvote 0
I have the compact that I received a couple weeks ago. I know that it's normal for these to leak some, but for people that own this rifle, can you chime in with how fast yours leaks? I lose about 500psi a day with this one. I know it has a smaller air volume with the 300cc bottle so it's more noricble, but what is considered "normal" for these?
Upvote 0
Are you shutting off the bottle after shooting? If not that sounds completely normal for the regulator bleeding air off.
Upvote 0
The compact doesn't have a shutoff. It uses an FX style bottle and valve. You have to unscrew the bottle like an FX rifle. I've been leaving it gassed.
Upvote 0
I stopped shutting my bottle valve off, and it's been about 3.5 weeks since I used it last and the doesn't seem to have lost any air, it used to, but I'm wondering if the regs have bedded in a bit, I did replace some of the O rings with harder nitrile one a while ago.
Upvote 0
Thanks that was my first group after sight in. My friend shot my Skout and his group was 1/4 inch. Real happy with the accuracy of this Epoch.
Upvote 0
Hey everybody, I have a dumb question. I don’t have access to a can of pellets at the moment, but does anybody know what the standard diameter and thickness of a can of JSB pellets are?
Apparently, nobody’s measured one online because it only comes up with Pellet sizes
I just wanna know a standard size can not the big ones
thanks
Apparently, nobody’s measured one online because it only comes up with Pellet sizes
I just wanna know a standard size can not the big ones
thanks
Upvote 0
2-11/16" diameter and the thickness is 7/8" this is the JSB canHey everybody, I have a dumb question. I don’t have access to a can of pellets at the moment, but does anybody know what the standard diameter and thickness of a can of JSB pellets are?
Apparently, nobody’s measured one online because it only comes up with Pellet sizes
I just wanna know a standard size can not the big ones
thanks
The H&N can measures the same.
Upvote 0