You Modified your Zelos how ?
I especially want to learn the FX barrel mod , or liners whatever that means.
Thanks OldVet wants to know.
I especially want to learn the FX barrel mod , or liners whatever that means.
Thanks OldVet wants to know.
Umarex Zelos Mod Squad
- Thread starter OldVet
- Start date
Gave the zelos what she deserved from the factory hah.
1. Tuxing 580 cc bottle.
2. Huben regulator
3. Custom made pic rail and bottle/barrel clamp. Used PetG CF and works beautifully. Even with this cheapo bipod haha
1. Tuxing 580 cc bottle.
2. Huben regulator
3. Custom made pic rail and bottle/barrel clamp. Used PetG CF and works beautifully. Even with this cheapo bipod haha
Upvote 0
Please let me know in a while after use how that Huben is working OK. I have been debating on it , and do you happen to have a .7L bottle you could put on I want to see if it will clear the barrel. What moderator are you using ?_if any. actionpistol is right nice band. Would you sell one?.
Last edited:
Upvote 0
Regarding the Huben, so far so good but will report over time.
I don’t have a larger bottle unfortunately. I am newer to the air world coming from traditional fire arms. I have calipers and make exact measurements if you need me to measure any that might help you assess fitment.
Regarding the bottle barrel band, I have a couple more teaks to make it better but once I do, I am happy to share the stl file or print one for the cost of shipping for a couple folks (cannot do a ton as you can imagine). Not something I need to make money on at this point. I am out of town for the week but can help when I get back.
I don’t have a larger bottle unfortunately. I am newer to the air world coming from traditional fire arms. I have calipers and make exact measurements if you need me to measure any that might help you assess fitment.
Regarding the bottle barrel band, I have a couple more teaks to make it better but once I do, I am happy to share the stl file or print one for the cost of shipping for a couple folks (cannot do a ton as you can imagine). Not something I need to make money on at this point. I am out of town for the week but can help when I get back.
Upvote 0
How's that reg workin for you.. i'm on the fence.. I made my own bottom and bottle pic rails too
Upvote 0
Very nice. Good work
Regard the Huben- so far so good. I am only a week in so I will need to monitor over time to know for sure.
Regard the Huben- so far so good. I am only a week in so I will need to monitor over time to know for sure.
Upvote 0
Nice work, Gongetit!
When you get your bottle band tweaked to perfection, please send me the stl file as I am running the same bottle and Huben Cricket reg as you. My reg was creeping at first but seems to be settling in.
When you get your bottle band tweaked to perfection, please send me the stl file as I am running the same bottle and Huben Cricket reg as you. My reg was creeping at first but seems to be settling in.
Upvote 0
I was considering buying the Tuxing .7L bottle but went with the .58L. Tuxing lists the specs of the .58 as 62-63mm diameter and 310mm length. The .7 is 61.5mm diameter and 400mm length. By my measurements for my setup with the Huben Cricket Reg, the .7L bottle would extend .5 inches past the end of my barrel shroud with the Zelos moderator adapter installed. I am running a 1.5 inch diameter moderator so there would be a clearance conflict if I had the .7L bottle. Because of the taper/curve on the end of the Tuxing bottles, a 1.2 inch diameter moderator might just fit but eyeballing it with my setup, it would be very close.
Last edited:
Upvote 0
Can you believe I'm leaving my Zelos .25 stock, I like it how it is stock, maybe down the road I might do the bottle conversion, but the barrel is perfect on mine, accuracy is phenomenal with Benji pellets, yeah Benji's, who would have guessed..... 
Upvote 0
Wow someone has the golden Zelos!! lol congrats bud.Can you believe I'm leaving my Zelos .25 stock, I like it how it is stock, maybe down the road I might do the bottle conversion, but the barrel is perfect on mine, accuracy is phenomenal with Benji pellets, yeah Benji's, who would have guessed.....
Upvote 0
Hammer spring swapped, polished the barrel (JB then Flitz), replaced a busted chamber o-ring and 3D printed some nonsense:
Upvote 0
Hammer spring swapped, polished the barrel (JB then Flitz), replaced a busted chamber o-ring and 3D printed some nonsense:
Man, that hand guard looks great!
Upvote 0
Thanks! I've been on a bit of a kick 3D printing stuff. If you've got a printer feel free to grab the files https://makerworld.com/en/models/1504572-umarex-zelos-mlok-handguard-foregrip#profileId-1574392
It's broken up into sections since I'm limited by my printer size and the fact that it's a bed-slinger that doesn't like tall thin prints.
I'm also working on a slightly thinner profile one that I'll eventually post.
Upvote 0
I dont have one yet however it’s not gonna be long until that changes..
i appreciate that !
I may give it a try once I find me a printer.
Upvote 0
Printing what I hope is my final version of barrel band medium and large as write this. Fingers crossed.
Upvote 0
Here is latest iteration installed. I made this barrel/bottle band wider for increased stability.
Last edited:
Upvote 0