Not enough volume in video. Beautiful green grassy place you have there.I cooled off with some CO2 Plinking, don't be fooled this rifle is a capable pesting tool also
Upvote 0
What did you do airgun related today.
- Thread starter Florida_Man
- Start date
I sat in the garden and shot the Marauder while sipping my coffee. I shot some groups at 20 yards with my elbows rested on a "bench". The breeze was light and coming directly at me and posed little challenge. On the other hand, it took me a minute to get my sight picture back after a week of staring at computer screens. But it's Sunday, so no pressure.
I hope y'all are getting a moment to enjoy some shooting today!
I hope y'all are getting a moment to enjoy some shooting today!
Upvote 0
Again I'm stock waiting on a dovetail cutter. All my cutters are oversize for the crosman lpa mim sight. So I just finished the grips with black epoxy paint. I like how it feels now and is even good as a lefty grip too.
Upvote 0
Turned my Crosman 2240 back into a carbine. I had missed it set up like that.
Baker Aluminum breech
Crosman 14.5" barrel
Crosman 1399 stock
LDC.
Baker Aluminum breech
Crosman 14.5" barrel
Crosman 1399 stock
LDC.
Upvote 0
Today I was on Airgun Nation at the nice cool public library , and replied to HPA Compressor Crossroads post whew. , and others. OV.
Upvote 0
Stood guard on my bird feeder, three squirrel's ate lead instead of bird seed . All over two cups of coffee then it was 10 meter time with FWB600 but shot @ 20 yards . at a 15 foot designed BB gun target .
Upvote 0
Years ago I was at a bar , and dancing with my 2 friends wives they did not want to go. So anyway I ordered my beer then that song margaraina came on when I returned to my table my beer was gone. beertheif: took it. Lol This was back in my Sheridan days. I'm trying to learn what Parallax means?
I'm going out to shoot my 3622's. Then I'm gonna get a metal breech for each of them. OV.
Upvote 0
Finally after USPS got done playing around the world we go, I got parts to finish up the 1377 and the 1377 PCP regulated. Just filled to 3500 psi and found the gauges are glow in the dark….ooooh fancy
Upvote 0
These are , so cool. Crosman accidentally sent me a 1377 steel breech , so that means I have to buy a 1377 right. Headed that way towards that damn rabbit hole again I'll trip , and fall in there. That means another scope too lol. You have nice custom ones what barrels are those. I have a Drifter I love it. So the top is a multi pump , and you made a 1377 into a PCP.? Cool
Upvote 0
Ok I went out , and shot the New 3622.
I have 2 , but one I used before , so I'm sure this was the new one as it started off over the chrony at 714 then dropped down gradually to 614 then climbed up to 785 then down gradually. I said I would shoot untill it went below 600 the last shot was 595.
I think that new barrel was leading up , and that's why the increase. That. Little rifle fits perfectly in the Birchwood Casey Fox Trot shooting rest. It's 102 °F out.
I have 2 , but one I used before , so I'm sure this was the new one as it started off over the chrony at 714 then dropped down gradually to 614 then climbed up to 785 then down gradually. I said I would shoot untill it went below 600 the last shot was 595.
I think that new barrel was leading up , and that's why the increase. That. Little rifle fits perfectly in the Birchwood Casey Fox Trot shooting rest. It's 102 °F out.
Upvote 0
Yes both are 1377’s top I added the stock that came with my 1322 plus steel breech and 18inch barrel. Bottom is same breech and barrel and used the trigger assembly from my old 1377 plus foregrip from 1322 and stock from Prod. Here is the 1322 pcp
Upvote 0
beerthief came from Frat parties in college . Keg of beer and the plastic cups that all look the same .
Upvote 0
Got my dovetail cutter last night, so been busy this morning. Milled the receiver and mounted the LPA MIM sight, I made the grove tight so have to use a sight pusher to install it. Then I bob the pellet probe and knob. I don't want anything that will snug un-holstering it. Still brainstorming how to make a flush mount bulb/piercing cap that won't require a tool.
Upvote 0
the PCP1377(aka Notos killa) passed the 24 hr leak test.
Puts some pellets on target with the pump 1377 and SeeAll sight (was difficult to get a pic looking thru it towards target). did a few shots, made some micro adjustments and then took shots at the 9,8,7,6 and was close. then mounted it further back and then it was money on the bullseye. This is only 20ft in garage, standing with no support. The SeeAll sight takes some getting used to.
Attachments
Upvote 0
Made a “quiet” pellet catcher out of a storage bin and two bags of mulch. My first group of 10 with my BSA R10, that I bought from a member here, were pretty tight at 25 yards, shooting with a bipod on an outdoor table. Time to go to the range for more challenging distances. This is my first PCP. Kinda liking it.
Upvote 0
Cracked apart the Uragan and took the reg up to 132.5bar. Was at 125b getting just over 41.5-45.5 FPE depending on projectile.
Now getting 44.2Ft Lbs with .216 JSB KO 20.83gr at 977.4fps, 43.89ft lbs with .217 21gr HP slug@ 970.7fps, 48.05ft lbs with .217 JSB KO slug 28.55@ 874.6 , 46.7ft lbs with 25.39 KO slugs .216@ 907.1, 47.2Ft lbs with .216 ko mk2 @ 915 44.3
Now getting 44.2Ft Lbs with .216 JSB KO 20.83gr at 977.4fps, 43.89ft lbs with .217 21gr HP slug@ 970.7fps, 48.05ft lbs with .217 JSB KO slug 28.55@ 874.6 , 46.7ft lbs with 25.39 KO slugs .216@ 907.1, 47.2Ft lbs with .216 ko mk2 @ 915 44.3
Upvote 0