I'm currently shooting slugs from my Mavy and want to experiment with some heavy pellets in 22. Barrel is in 600mm. Any suggestions?
If you have a slug liner and shoot slugs already try the jsb monster redesigns or heavy hades, a pellet liner shoots them fine too. I refer to them as "bad bc slugs". My impact is set up for 23 and 34 gr slugs and it just so happens that the 23 tune really likes the 25 grain pellets too. They're fast, too fast but remained accurate at 960 fps. 700mm heavy liner.I'm currently shooting slugs from my Mavy and want to experiment with some heavy pellets in 22. Barrel is in 600mm. Any suggestions?
I do have the above installed, as it is shooting 31 grain nsa's at around 950fps. I'm excited to try the monster redesigns...this is the pellet most are referring me to.If you have a slug liner and shoot slugs already try the jsb monster redesigns or heavy hades, a pellet liner shoots them fine too. I refer to them as "bad bc slugs". My impact is set up for 23 and 34 gr slugs and it just so happens that the 23 tune really likes the 25 grain pellets too. They're fast, too fast but remained accurate at 960 fps. 700mm heavy liner.
Just because I know the mav, and I know your projectile.... Its in my 34 tune with a different chart in the optic..... What's your power wheel at, and final reg pressure?I do have the above installed, as it is shooting 31 grain nsa's at around 950fps. I'm excited to try the monster redesigns...this is the pellet most are referring me to.
Final is at 150....power wheel at 4Just because I know the mav, and I know your projectile.... Its in my 34 tune with a different chart in the optic..... What's your power wheel at, and final reg pressure?
If you're not running a really heavy hammer I think you should be able to use them on 1 without having to mess with the micro screw. My shooting buddy has a 500mm mav and we have just gone down this exact road. He's at 150 bar, me on a 700 mm impact, it liked 150 bar....... There's a trend.Final is at 150....power wheel at 4
I appreciate youIf you're not running a really heavy hammer I think you should be able to use them on 1 without having to mess with the micro screw. My shooting buddy has a 500mm mav and we have just gone down this exact road. He's at 150 bar, me on a 700 mm impact, it liked 150 bar....... There's a trend.