Karma Karma EQ Help? How to Degass and Does Barrel Index?

Does anyone know how this degasses? unscrew the tank? and also can the barrel be indexed? (loosened, spun 45 degrees in place, retightened).

20250520_120011.jpg
 
Last edited:
  • Like
Reactions: PEP3
Does anyone know how this degasses? unscrew the tank? and also can the barrel be indexed? (loosened, spun 45 degrees in place, retightened).

View attachment 565952
Tank is hot swap, and can be removed full psi. The jam nut goes towards the tank to lock it in place. Good luck. Aea master slugs are my go to round for the tightest groups
 
So far I’m not a fan of this gun. Trigger problems, regulation problems, accuracy? Hope to get to that after other problems…
Heavy, expensive compared to what can be got. I jumped on it too quick.
How many dealers say “ no returns “ in the first communication .
Yea my regulator is inconsistent, which makes Fps inconsistent, which changes POI when shooting. Hopefully there's a fix in the future. My trigger is good after adjusting the linkage, and the sear screw. I can go hole in hole 2 or 3 times then miss by a half inch. It's frustrating.
 
Yea my regulator is inconsistent, which makes Fps inconsistent, which changes POI when shooting. Hopefully there's a fix in the future. My trigger is good after adjusting the linkage, and the sear screw. I can go hole in hole 2 or 3 times then miss by a half inch. It's frustrating.
Mine was spot on. I showed the FPS for the whole video (posting tomorrow). I would say exchange it or have them send you a new reg under warranty.
 
So far I’m not a fan of this gun. Trigger problems, regulation problems, accuracy? Hope to get to that after other problems…
Heavy, expensive compared to what can be got. I jumped on it too quick.
How many dealers say “ no returns “ in the first communication .
No returns? Heck no. Who is trying to pull that crap? I'll get that sorted out real fast. Just PM me.
 
Last edited:
After I saw your video, I pull out mine and start tinkering with it now I don’t know how many turns was in the hammer is it stops and then you can still go out like 11 clicks can you tell me how many clicks is your hammer in from absolute off. In mind, the power adjustment works different maximum. It’s maximum the middle cut down to about 770 from 820. What I’m using 40grain slugs and minimum keeps me about 280 ftps
with the same slugs.
 
Last edited:
After I saw your video, I pull out mine and start tinkering with it now I don’t know how many turns was in the hammer is it stops and then you can still go out like 11 clicks can you tell me how many clicks is your hammer in from absolute off. In mind, the power adjustment works different maximum. It’s maximum the middle cut down to about 770 from 820. What I’m using 20 grain slugs and minimum keeps me about 280 ft./s with the same slugs.
My hammer spring is at 0 clicks from 0. It's at 0, reg at 2150 psi
 
  • Like
Reactions: 1handwill.gc