Neat looking micro impact! Not much said about the specs & seems to be made to sub 12 , but still looks like a winner for FX.
FX FX M4 Micro
- Thread starter pat585
- Start date
From what I can see, they took the M4 Compact, added the Saber Tactical rails, removed the stock shroud and threaded the DonnyFL Koi directly on the barrel. All cosmetic.
Upvote 0
30 cal with 600 mm barrel. Shroud stops at the very end of the long Saber Tactical top rail.
With a 500 mm barrel the DonnyFL KOI will fit inside the top rail and would extend about 1/4" past.
There never was any twist in the M3 spine. The twist was due to the aftermarket extended bottom rails flexing side to side with a bipod attached at the outboard end. The Saber Tactical bottom rail used on the M4 in the video would probably not flex with a bipod that far out.
Upvote 0
Man about time, I made one 2 years ago and showed to FX of Sweden. 1/2 20 barrel threads just past the barrel clamp. Setup to shoot the .22 hybrids at 900 ft./s
Last edited:
Upvote 0
I’ve been fascinated by these short barrel/long can impacts for a while. So much so that they inspired my Wildcat modifications.
Upvote 0
Oh I should have clarified. The Wildcat is the only one that’s mine. The others are pictures of other builds I collected because I wanted them for reference when I started my planned M3 mini. Ultimately I became intrigued with the idea of seeing if I could give my Wildcat a similar treatment, and switched gears right before tearing into my M3.
Thank you for sharing the pictures of yours. In fact, unless I miss my guess the gold one I posted was one of yours.
Upvote 0
Yes, the gold one kinda looks familiar. That was one of a kind that Donny FL wanted me to tune. Here more photo of the gold one.
Upvote 0
Looks like a beast straight off a movie set!!! But your silver super shorty above beats it! Looks epic…
Upvote 0