A New Video About the DRS Pro

Jump to latest Follow Reply
markhooper said:
I've been wondering on the FX Drs guns if you can easily swap the pelenium like a magazine or if it pretty much permanent.. I don't like the looks of the conventional wood stock though.. probably going to be expensive
Click to expand...
The wood stock seem to be a little extra cost, the delux wood + rosewood tip i dunno dont think that is the price listed.
Plenums seem to screw on with 4 hex screws, so that should be swappable in very few minutes, it will probably be slower degassing the gun VS changing the plenum.
IMO i dont think that the plenum is something you are supposed to swap around very much.

I would expect FX to have a set of guidelines on what plenum size to use with XX setup

The Classic models though, seem like they are modest power pellet shooters, so in .22 at least i would assume pushing things like the newest 28gr pellets might be a tall order, at least in stock config
In .177 the listed specs with 10.3 gr pellets and 920 FPS, that will be a lot lower if you but in a Beast, but MRD / 13.4 gr might be OK shooting upper 800 FPS i recon.
 
  • Like
Reactions: qball, markhooper and Impact701
Upvote 0
I know this was already posted but hear it is again.

Screenshot_20240123_093329_Chrome.jpg


Screenshot_20240130_083202_Chrome.jpg
 
Upvote 0
Peashooter said:
The wood stock seem to be a little extra cost, the delux wood + rosewood tip i dunno dont think that is the price listed.
Plenums seem to screw on with 4 hex screws, so that should be swappable in very few minutes, it will probably be slower degassing the gun VS changing the plenum.
IMO i dont think that the plenum is something you are supposed to swap around very much.

I would expect FX to have a set of guidelines on what plenum size to use with XX setup

The Classic models though, seem like they are modest power pellet shooters, so in .22 at least i would assume pushing things like the newest 28gr pellets might be a tall order, at least in stock config
In .177 the listed specs with 10.3 gr pellets and 920 FPS, that will be a lot lower if you but in a Beast, but MRD / 13.4 gr might be OK shooting upper 800 FPS i recon.
Click to expand...
so I was thinking about using high pelenium for jsb jumbo monster redesigned pellets or possibly some slugs.. and the small pelenium for light pellets.. just a idea I thought up to do two things with one gun.. I haven't seen any prices yet but I assume they are out of my price range..
I don't know anything about JTS but I saw last night on YouTube a JTS that looks similar to the FX Drs wood stock..
anyone know anything about JTS? quality or junk?
Mark
 
Upvote 0
markhooper said:
the pro 22 looks great spec's if only it was available in the wood stock..
is the pro in a synthetic stock? looks like it might be aluminum? it's hard to read the fine print on the phone.. going to have to load this page on the computer..
Mark
Click to expand...
It;s aluminum

A PRS style stock from one of the leaders in PRS style chassis systems......

Hope they offer other colors for the PRO.....
 
  • Like
Reactions: markhooper
Upvote 0
I suppose it will " plop " right into the stock of the Classic, but with the barrel being that long i fear it might look a bit silly.
Also you pay a premium for that PRO frame, so not using it is a huge waste.

Unsure if getting a Classic and mod it with PRO parts will be cheaper i somehow doubt that, but at least you will have parts in surplus you can actually sell, or sell more easy than that frame of the PRO
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu