Will Dreamline barrel fit an FX Crown

[Cajun1024]

Guys,

Can you please tell me if a Dreamline barrel will fit an FX Crown?

Thanks for your response

 

[Bravo1956]

I would call FX Usa they are great to talk with and helpful from my experience.

 

[Cajun1024]

Thanks Bravo. Called same, they will not interchange

 

[Spray1Mark]

Depending on which type they will, the brass/steel section that enters the block is identical on IMPACT/CROWN/DREAMLINE/MAVERICK etc. the shrouds may differ in diameter which will preclude them swapping over, however if you mean the IMPACT type that has the steel tube rather than the SUPERLITE then they will interchange without the shroud, infact some of the DREAMLINE barrels now do away with the steel tube and if they are the smaller diameter shroud as in the standard rifle version they are interchangeable.

You will still require a probe however.

 

[ChRiSiS]

I regularly use my Dreamline 600mm .25 cal on my Crown without any trouble. The same is true of my Dreamline 380mm .25 cal barrel. The shot below shows the 600mm Dreamline barrel on my Crown Continuum.

Chris

 

[Cajun1024]

Thanks for the information. I appreciate it very much

 

[R0B]

Hi all, rather than start another thread could anyone advise if the Dreamline compact barrel will fit a Crown. I like the look, but would like to confirm that it fits befoire I buy.

 

[FLgunner]

I swap mine all the time between my Dream Tac and Crown, the only thing preventing the use of one barrel on the other is the size of the shroud. If you have the fat shroud that can cause issue in certain configurations of the Dream Tac, but all my Dreamline barrels work on my Crown.

 

[R0B]

Thanks. I'm looking to buy the fat dreamline barrel soley to fit to the crown, so that'd good news

 

[wickedwoods]

Depending on which type they will, the brass/steel section that enters the block is identical on IMPACT/CROWN/DREAMLINE/MAVERICK etc. the shrouds may differ in diameter which will preclude them swapping over, however if you mean the IMPACT type that has the steel tube rather than the SUPERLITE then they will interchange without the shroud, infact some of the DREAMLINE barrels now do away with the steel tube and if they are the smaller diameter shroud as in the standard rifle version they are interchangeable.

You will still require a probe however.

 

[wickedwoods]

Depending on which type they will, the brass/steel section that enters the block is identical on IMPACT/CROWN/DREAMLINE/MAVERICK etc. the shrouds may differ in diameter which will preclude them swapping over, however if you mean the IMPACT type that has the steel tube rather than the SUPERLITE then they will interchange without the shroud, infact some of the DREAMLINE barrels now do away with the steel tube and if they are the smaller diameter shroud as in the standard rifle version they are interchangeable.

You will still require a probe however.

I am trying to find a 700mm .30 barrel for my fx dreamline power pup, will a 700mm crown barrel work if i use the 700mm .25 shroud that i currently own ??

 

[swNCsw]

I am trying to find a 700mm .30 barrel for my fx dreamline power pup, will a 700mm crown barrel work if i use the 700mm .25 shroud that i currently own ??

No .

 

[wickedwoods]

No .

So basically the barrel from the crown would work, i just have to find the correct shroud

 

[swNCsw]

So basically the barrel from the crown would work, i just have to find the correct shroud

I never said that . It happens quite often that individuals ask questions and give little information or partial information . They also fail to provide pictures which are always very helpful in trying to help others figure out there questions, problems or help assist them with their endeavors lol . There are several iterations of the fx barrels out there and some will work some will not .

Have a nice evening

 

[wickedwoods]

I never said that . It happens quite often that individuals ask questions and give little information or partial information . They also fail to provide pictures which are always very helpful in trying to help others figure out there questions, problems or help assist them with their endeavors lol . There are several iterations of the fx barrels out there and some will work some will not .

Have a nice evening

Basically im trying to replace my .25 700mm barrel with a impossible to find .30 700mm on my fx dreamline powerpup, the entire rifle is stock, from what ive read the crown and dreamline have the same barrel.

 

[wickedwoods]

I never said that . It happens quite often that individuals ask questions and give little information or partial information . They also fail to provide pictures which are always very helpful in trying to help others figure out there questions, problems or help assist them with their endeavors lol . There are several iterations of the fx barrels out there and some will work some will

 

[wickedwoods]

Sorry I thought I was asking a different person a question. Newer member here sorry

 

[swNCsw]

Basically im trying to replace my .25 700mm barrel with a impossible to find .30 700mm on my fx dreamline powerpup, the entire rifle is stock, from what ive read the crown and dreamline have the same barrel.

View attachment 412668

Sorry I thought I was asking a different person a question. Newer member here sorry

I will respond in your original thread if it is ok because the next person doing a search would miss it here maybe in the op's post . Long answer is in your other post Sir.