Does the Maverick have 23mm gauges? I don't own one so I can't measure. Haven't been able to find the specs anywhere except Huma selling 23mm ones.
FX Maverick gauge diameters..
- Thread starter MACTEN
- Start date
why not go Amazon Digitals? They work fine. More accurate too. https://www.amazon.com/gp/product/B096WZR73J/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Yeah every so often you have to replace the battery but buy a 24 pack and be done with it. The covers are TIGHT, a little light sandpaper and some fitting and you can get them interference fit, I've been considering a touch of grease to reduce the stiction a bit.
Last edited:
Upvote 0
I have them ( digi ) in 25mm, 28mm plus Sekhmet, 25mm ,28mm, wika 25,28
huma 25 etc.. My question was about the diameter of the Maverick gauges.
Upvote 0
28 mm like the impact.
www.huma-air.com
Wika 28 mm regulator pressure gauge upgrade set 250 bar for Fx Maverick with optional black cover
The Wika 28mm 250 bar scale regulator pressure gauge for the FX Maverick! The accurate upgrade you need! This gauge has a clear white scale lable.
www.huma-air.com Upvote 0
So the stock gauges are both 28mm? I know now that the schematic says 23mm.. It's wrong I take it?28 mm like the impact.
Wika 28 mm regulator pressure gauge upgrade set 250 bar for Fx Maverick with optional black cover
The Wika 28mm 250 bar scale regulator pressure gauge for the FX Maverick! The accurate upgrade you need! This gauge has a clear white scale lable.
Upvote 0
I’m not positive. Just going by what huma air has listed on their website. I would think either would be fine as there isn’t anything that would be in the way on a Maverick like a stock or something.
Upvote 0
I am just wanting to know what the size of the actual gauges are. I'm getting one at some point soon. A buddy is building a stock for himself right now and is about to inlet it. He wants my gauges that I will be taking off and replacing with whatever I decide after I get it. He can't inlet the stock until he knows the diameter of the Maverick gauge/s. I said I would try to find out now online but ran into the issue of nobody knowing even though it's a popular airgun. Yes he's cheap and that's actually pretty cool.
Last edited:
Upvote 0
A lot of folks change them shortly after getting their Mavericks. I changed the ones on the three I have owned almost immediately. They are small and hard to read accurately.
Do you own a set of calipers or maybe able to borrow a set?
Do you own a set of calipers or maybe able to borrow a set?
Upvote 0
I usually change gauges on everything. I don't have one in my possession yet to measure. I do have digi calipers. My friend who lives in another state is going to be using the gauges I take off but is trying to finish his stock now and wants to know the diameter. He will just have to wait until I do finally get one and measure them because nobody knows the diameter.
Upvote 0