Daystate Daystate Pulsar issue....

[Bud-sc]

I have Pulsar in 22 hp will not fire unless I tap the side of stock. The batteries are charged full and tried a 9 volt battery. I load shot into the rifle the red light doesn't come on unless I take the palm of my hand and hit the stock several times. Not really sure where to start looking. Maybe someone had this issue before. Thanks...

 

[efem09]

Sent it back to AOA

 

[MikeVV]

Sounds like a loose / frayed wire.
If you aren't comfortable with tracking down bad wires... Check the battery box closely for a bad wire connection. Wiggle the wires, watch the screen for changes.
Agreed with the above, call AoA, and advise, then send it to them for repair. They are the US, guys for Daystate repairs.

Note, I have two Pulsars (.22), both working well...

Mike

 

[Bud-sc]

Sounds like a loose / frayed wire.
If you aren't comfortable with tracking down bad wires... Check the battery box closely for a bad wire connection. Wiggle the wires, watch the screen for changes.
Agreed with the above, call AoA, and advise, then send it to them for repair. They are the US, guys for Daystate repairs.

Note, I have two Pulsars (.22), both working well...

Mike

Thanks do that tomorrow after the range. But first have made a project with the Pulsar barrel going to try it in my Redwolf. Curious if it will shoot better in my Redwolf having the feeling it will.