I'm really thinking about getting one with the laminite stock. What kind of velocity are you able to get with the RDM's and a 500 mm barrel? Are you happy with the Dreamline Classic overall?
thanks,
thanks,
FX Anyone shooting the 25.39 grain .22 RDM's in an FX Dreamline Classic?
- Thread starter csdilligaf
- Start date
I have two Dreamline Classics. One is the laminate stock in .177 and bone stock. Love it. The other is a synthetic, .22 with HUMA probe & spring, heavy hammer and one plenum, reg. @ 125 bar, TP - high. I don't want to go higher on the reg. because I want to get at least two magazines per fill ( short air tube with 500mm barrel). Not sure what RDM's are (pellet or slug), but I get ~880 fps with JSB/ FX diabolo pellets with this setup. So, I'm not sure you're going to get decent velocities with 25 gr. pellets with a stock setup. My upgrades are not expensive or hard to do.
I really like the Classic, but it's not a real high power gun. Just accurate and nice to carry. Shoot it for what it is meant to be.
I really like the Classic, but it's not a real high power gun. Just accurate and nice to carry. Shoot it for what it is meant to be.
Upvote 0
So the Huma probe is the hollow one right? Thats what I was wanting to do as well. Is the 880 fps with the 18.1 grain then? And yes RDM was short for Redesigned Monsters.
thanks,
Upvote 0
It’s a pin probe and the velocity is with 25.4 gr. Pellets.
I shot 18.2 gr. Pellets on TP low (593 fps) and medium (954 fps) settings. Too slow and too fast.
Looks like 21 and 25 gr. Pellets and 21-23 gr. Slugs are in the good velocity range without changing anything except the TP setting. Accuracy testing will happen today. I just changed calibers on Friday.
I shot 18.2 gr. Pellets on TP low (593 fps) and medium (954 fps) settings. Too slow and too fast.
Looks like 21 and 25 gr. Pellets and 21-23 gr. Slugs are in the good velocity range without changing anything except the TP setting. Accuracy testing will happen today. I just changed calibers on Friday.
Upvote 0