Put a .177 barrel on my Talon P (thank you again Rob_in_NC) Looking to put some slugs thru it just because I'm bored. You guys have any suggestions on which slugs?
thanks
Mike
thanks
Mike
Last edited:
Exactly what I ordered. How's the expansoin on them tiny slugs?This is all I use:
![]()
Nielsen Specialty Ammo | .178 | 12.5 gr | 400 Slugs | $0.037 /rd
nielsenspecialtyammo.com
Exactly what I ordered. How's the expansoin on them tiny slugs?
I read they were more likely to "pass thru" rather than expand. Thats why I want the knockouts.Not really good expansion but they will punch holes like you wouldn’t believe for how light and little it is.
Doesnt look like velocity is going to be a problem. May have to slow it down a notch so I have some adjustment to go up and down.The NSAs will expand if you get up to 950 fps or so. I don't have an Airforce, but I've had good luck with the JSB Knockouts too.
I don't think you'll have any velocity issues with that platform either but you'll need it if you want expansion. I don't see any expansion with NSA 12.5s unless I get them above 950. Pushing these little slugs hard will put a big smile on your face.Doesnt look like velocity is going to be a problem. May have to slow it down a notch so I have some adjustment to go up and down.
I read they were more likely to "pass thru" rather than expand. Thats why I want the knockouts.
I don't know how your barrel will like them, but if you have a tin of RWS Supermags, try them. I have 2 rifles that shoot them well at 1000 fps and they hit hard at closer ranges.As long as they shoot accurately I'll be good. Just do some pesting here and there. Dont want to have a butt load of slugs that dont work.
I'll be more than happy to share any and all information I gather with ya buddy. Same goes foe everyone else also.13 all the way up to 22 grain here... may be worth a look!
Let me know how goes. Always been interested in the idea of a tiny slugger, but aside from a 17HMR, havent delved into it.