Have you ever cracked a gauge?

Jump to latest Follow Reply
Buckless Yooper

Buckless Yooper

Member
May 17, 2022
32
45
Creswell, Oregon, U.S.A.
So last weekend I was up in the mountains shooting my gauntlet .30. I stopped to fill my tank with my portable compressor. After filling I noticed a single small crack in the glass of the gauge on the tank. (I filled it to a little over 4k) I’ve never dropped it or banged it against something, my only guess is it could’ve been the cold? (It was probably high 30’s low 40’s °F) Tonight I was looking at it and I have MANY small cracks😅 picture doesn’t really do it justice. Has this ever happened to you? Should I be concerned or replace immediately? Any input would be greatly appreciated
3341A6FE-C516-4D32-9437-C70DDAD67356.jpeg
 
Last edited:
WorriedMan said:
Yooper,
If it bothers you, just replace with one from eBay, less than $15. WM
Click to expand...
It does not bother me, I think I’ll just let it be. I just hope it’s not like a safety concern. Umarex wanted me to mail them the entire tank and I’m a little apprehensive because I had such a hard time getting a tank from them before, that didn’t leak.
 
Upvote 0
Yooper,
Used mine for a year as you see it, worked just fine. Would not recommend removing regulator from tank, not sure why, but even under no pressure the threads get damaged. Does Umarex put sealer on threads? Don't know but sure hard to remove, guess that's why they want entire tank. Replacing gauge is easy and cheap, visit eBay and explore, maybe one will catch your eye. WM
 
Upvote 0
Buckless Yooper said:
It does not bother me, I think I’ll just let it be. I just hope it’s not like a safety concern. Umarex wanted me to mail them the entire tank and I’m a little apprehensive because I had such a hard time getting a tank from them before, that didn’t leak.
Click to expand...
I had it happen to my gauntlet and my bulldog they've been that way for months with no leaks the glass doesn't hold any pressure in fact if you play with it just right you can get the whole thing to pop out and it still holds pressure I think it's there just to keep you from accidentally messing up the internals of the gauge
 
Upvote 0
WorriedMan said:
Yooper,
Used mine for a year as you see it, worked just fine. Would not recommend removing regulator from tank, not sure why, but even under no pressure the threads get damaged. Does Umarex put sealer on threads? Don't know but sure hard to remove, guess that's why they want entire tank. Replacing gauge is easy and cheap, visit eBay and explore, maybe one will catch your eye. WM
Click to expand...
I have removed the tank off of my gauntlet a few times obviously depressurized no problems yet
 
Upvote 0
Hard2hurt223 said:
I had it happen to my gauntlet and my bulldog they've been that way for months with no leaks the glass doesn't hold any pressure in fact if you play with it just right you can get the whole thing to pop out and it still holds pressure I think it's there just to keep you from accidentally messing up the internals of the gauge
Click to expand...
Ah yes, that makes sense. Thank you for the info! I’ll just leave it alone then
 
  • Like
Reactions: Hard2hurt223
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu