• The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.

RTI Prophet II — Powerful and Tough — a Hunter's Dream

Jump to latest Follow Reply
All was good with my RTI Prophet II until this morning. I fired two shots and it began to hiss. It then popped out of the barrel. FWIW - I have about 100 pellets through it so far.

I noticed the bottle regulator assembly was slightly out of alignment and loose. I figured it just needed to be topped off. The compressor wouldn't get above 44 bar. I brought it inside and could hear the hiss coming from the regulator. I removed the regulator/bottle assembly and confirmed air was leaking out of the regulator outlet.

I assume it's a bad regulator and messaged RTI Shop where I bought it.

Any easy home shop repairs until I hear back?

Thanks,
 
Upvote 0
EDventure said:
All was good with my RTI Prophet II until this morning. I fired two shots and it began to hiss. It then popped out of the barrel. FWIW - I have about 100 pellets through it so far.

I noticed the bottle regulator assembly was slightly out of alignment and loose. I figured it just needed to be topped off. The compressor wouldn't get above 44 bar. I brought it inside and could hear the hiss coming from the regulator. I removed the regulator/bottle assembly and confirmed air was leaking out of the regulator outlet.

I assume it's a bad regulator and messaged RTI Shop where I bought it.

Any easy home shop repairs until I hear back?

Thanks,
Click to expand...
just curious. did you try adjusting the reg any or just shoot it as is straight out of the box?
 
Upvote 0
I had 2 out of 3 regs go south (I have 3 Prophet rifles) the dealer took good care of me (sent rebuild kits free) and im sure youll be taken good care of also. the 2 regs that went bad I never touched as I was instructed from the dealer...I was told to just shoot it and let it break in. I rebuilt one reg and its working fine. the other I haven't messed with yet. I tried RTI's fixed reg. which has been working flawless.. (the one reg that hasn't caused me any issues yet....I messed with that thing since day one... I figured what the heck its probably gonna crap out anyway. but it hasn't) I was hoping RTI would have fixed their problem child regs with the P2.
 
Upvote 0
EDventure said:
This morning I did try turning the regulator screw in and out a few turns. Thinking that might help seat an o-ring or release any debris. While it did allow the compressor to air to 118 bar, it stopped there and continues to leak out the barrel or breach area if you crack open the cocking lever. Stay tuned!
Click to expand...
That doesn’t sound like a regulator issue. It sounds like a poppet issue.

Dave
 
  • Like
Reactions: jmohme and Scotty1
Upvote 0
Scotty1 said:
I wonder if anyone has tried the Huma reg for the Prophet? It lowers the working pressure to 250 bar, but not a bad trade-off in my opinion. It also would relocate the reg gauge to the butt of the rifle.
Click to expand...
Bought one but have not had time to install. The one thing you should be aware of is that the Huma is not externally adjustable like the RTI. You'll need to de-gas/disassemble to make adjustments. Mine came from Huma set at 127bar.
 
Upvote 0
lbc_PSI said:
The one thing you should be aware of is that
the Huma is not externally adjustable like the RTI. You'll need to de-gas/disassemble to make adjustments.
Click to expand...

🤷🏻‍♂️
The one thing that made me buy the RTI over any of the other rugged (=non-FX) bullpups was that
the RTI regulator is externally adjustable...! 😆 No need to degas/ disassemble....!


Why someone would throw adjustability out the window —
and with it 30% of their shot count —
is a riddle to a simple mind such as mine.... 😉

Matthias
 
Last edited:
  • Like
Reactions: rigbymauser and jmohme
Upvote 0
EDventure said:
This morning I did try turning the regulator screw in and out a few turns. Thinking that might help seat an o-ring or release any debris. While it did allow the compressor to air to 118 bar, it stopped there and continues to leak out the barrel or breach area if you crack open the cocking lever. Stay tuned!
Click to expand...
thats a real drag hopefully you ge it going soon. new gun and waited for it then broken plain out stinks
 
Upvote 0
Scotty1 said:
Well Matthias, that’s a heck of a question, and I don’t believe I have a rational answer. Heck man, even I’m baffled by this behavior …I’ll have to get back to you, I need more time.
Click to expand...

🤣

Scotty, fortunately I found a couple of rags to mop up the dripping irony. 🤣 Nice. 👍🏼


And I'm sorry that things haven't worked out for you so far! 😞

➔ I'm sure RTI will make it right by you — I keep reading how they send out updated regulators when someone's fails.

Cheers,

Matthias
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu