Tuning Leshiy classic digital gauge question

[IAfaug]

So finally got a leshiy classic bought and it has the digital gauge. My question is does it automatically read the regulator setting? It says 120 bar now. if i go in and try and turn this down to 110 will it automatically pick up that reading
thanks

 

[towle]

The digital gauge do not read you reg setting
As far as I know, the default 120 bar setting is used only to calculate remaining shots and you can change this setting
Both my classics reg. are set at 120 bar and adjusted to the 5% below the knee so holds poi down to 100 bar so if I wanted to use the calculation option I would change that setting to 100 bar, but I find it easier just to look at the bar reading
...also you can hear from the shot sound when you are near the last poi shot as the valve stay open longer

EDMU user manual attached

View attachment Handleiding_-_Digitale_Manometer_Edgun_EDMU_EN_.pdf

 

[IAfaug]

So i still need to manually lower regulator

 

[towle]

Yes manually lower the minimum setting for the last useful shot, the EDMU do not know you regulator setting but keeps track of the tank pressure, so all you have to do is lower the tank pressure to the desired minimum and affirm this in the setting menu

 

[rodney hew]

So finally got a leshiy classic bought and it has the digital gauge. My question is does it automatically read the regulator setting? It says 120 bar now. if i go in and try and turn this down to 110 will it automatically pick up that reading
thanks

Do your self a favor, use the anolog .Changing the battery is a nightmare. The MK 1 came w/ digital & a lot of people had problems & changed to analog . The L2 is analog .

 

[IAfaug]

So buy the analog form Edgun or where

 

[rodney hew]

So buy the analog form Edgun or where

Any Edgun dealer,it's standard gauge w/ BSP thread .hth

 

[IAfaug]

Ok then take apart and lower regulator or spend the money and put a huma in

 

[rodney hew]

Ok then take apart and lower regulator or spend the money and put a huma in

 

[IAfaug]

Well which lol

 

[IAfaug]

And where could I find a 30 cal 350 barrel for it

 

[rodney hew]

The huma is easier to adjust & smaller in size .You get more air capacity for the mk 1 small air tube.

 

[IAfaug]

And a 30 cal barrel? Where can I find that

 

[rodney hew]

And a 30 cal barrel? Where can I find that

I did the first 9mm conversion on a mk1 . I bought a barrel on ebay & machined to fit. I sold the mk1 to a friend Terry King he did a post in the big bore forum ( NEW TO ME ) you can read the post & see pics,

 

[HubenK1Sniper92]

So finally got a leshiy classic bought and it has the digital gauge. My question is does it automatically read the regulator setting? It says 120 bar now. if i go in and try and turn this down to 110 will it automatically pick up that reading
thanks

That’s not the reg pressure that’s the tank pressure