Tuning Fx wildcat mk3 bt regulator

[SimpleGuy]

I can only get 130 bar before 1st reg maxes out. I purchased a brand new wika gauge to replace the smaller rear gauge thinking that was the problem but it seem it's the regulator.
I've read where guys are placing the first regulator as high as 170-190bar? Well, I'm not even close to 170bar and the adjustment screw is showing about 3 threads past flush so I'm sure I'm close to getting a leak there if I go any further with the adjustments!
I just purchased the WC from PA last month so I'm thinking I should reach out to them.? What is you guys opinion??

 

[mubhaur]

Yes it appears that there is some issues with the regulators. If possible you may claim warranty

 

[ChRiSiS]

I can only get 130 bar before 1st reg maxes out. I purchased a brand new wika gauge to replace the smaller rear gauge thinking that was the problem but it seem it's the regulator.
I've read where guys are placing the first regulator as high as 170-190bar? Well, I'm not even close to 170bar and the adjustment screw is showing about 3 threads past flush so I'm sure I'm close to getting a leak there if I go any further with the adjustments!
I just purchased the WC from PA last month so I'm thinking I should reach out to them.? What is you guys opinion??

That‘s definitely not right,. I have been able to get mine as high as 150 bar with no trouble. I suggest that you talk with FX.

 

[CoyoteGod]

Had a first reg failure on new wildcat BT right away going to 150/180 for 30 caliber power tune with hybrid slugs out of a 700mm. Had to ship to FX. Their response and repair was fantastic as always. I had a feeling talking to them it may have been a known problem as they just told me to send it in after a quick technical assistance check list of questions.