Nice guns, John.

This Raw is an absolute monster, I can sell with the element helix ffp or without don’t matter to me. She’s loaded and ready to roll and not any issues at all. Below ima post pics of the gun and also a group I shot at 50 yards. She is a tack driver I promise. It was tuned by the original owner of raw Martin Rutterford
Edit: the scope in the pic is not the scope that might go with the gun at the right price but it has an element helix on it right now. No scope $1400

I agree,it's a gorgeous rifle without a doubt.

CatnDoo said:

Ah Yes Mr. Firewalker
(Commenting or replying to ads is disabled - use the PM system).

The phrase "I glazed over" is indeed there. Thank You

Click to expand...

It was for everybody, many have never read it before.

This listing has been renewed

This listing has been renewed

Most definitely could have missed some wind calls, But alot of people including myself automatically assume horizontal is just a missed read? This just happens to consistently with this gun regardless. Yes I have checked for loose or improper tensioning, cant, scope etc. I have put on a Moderator and an air stripper only provided more vertical. It’s ok I'm making piece with it, I refuse to buy any other HP gun unless it’s a Thomas HP! I truly believe they are the only gun that will give you true accuracy at distance equal to the sub 20ftlb target rifle.

SIGHTRON S-TAC
FFP 4-20X50 ZERO STOP
LIKE NEW IN BOX
Excellent Hunting or Field Target Scope!
30٪ OFF RETAIL AND FREE SHIPPING
ONLY $550 SHIPPED
PayPal FF please

Start em early I guess

Well, had to find out what it’s really doing for accuracy. I mounted a scope and put it on the bench. Tried JSB 18.13s and 15.89 Hades. Wow for semi auto pistol, this little guy rocksI’ll see the JTS 21.53gr semi-dome do next week.



Here’s (2) 5-shot groups with 18.13s at 25 yards:

And same for Hades:

As the title says. I have a 500 or 600 barrel kit and probe I’d like to trade off a 25 or 30 barrel kit and probe. Preferably 600, but I’d entertain others.

Eric.Wilson said:

Hi everyone, I also wanted to mention something I was very relieved to hear, the excessive pop-up issue is not intentional and is actually something our IT team has been working on fixing. I believe it is intended to only be seen once and when you dismiss it you should not be asked again. As someone who uses our website many times every day I completely understand how frustrating it is and have mentioned it many times myself. Hopefully this will be fixed very soon!

Click to expand...

Thanks for the update. its not as bad as other places ive seen but good to know its being worked on.

Gotta work on it first.

Want to sell my Flashpup .177, comes with 2 mags, original box, manual, and papers that came from hatsan when I asked for a replacement barrel. This gun will not shoot slugs, but it prefers H&N, it particularly likes the Barracudas, Barracuda Hunters, Barracuda hunter extremes and the Barracuda powers which are copper coated, thsoe probably shoot the best. It's been a while since I shot this gun so I will post pictures tomorrow of chrony numbers with different ammo.

I have reduced the length of the valve as to no waste air, removed 1 of the two weights that are in the hammer area to reduce hammer bounce. Aside from that I changed the original baffle in the shroud for the single piece 13 stack shroud that's on ebay. I'm only getting rid of this becuase it won't shoot slugs.

It does have nicks and dings here and there,nothing serious though. I've used this gun to take hundreds of iguana.

Just finished filling my SCBA tank to 4500 psi. Best I can tell is it took 5 ten minute runs with 20 minutes of cool down between each run to go from 3000 to 4500 psi. This thing is really surprising for its size. I like it so far.
Ray

i will try my best Randall, thank you !

NOT mine, not even in the same state You NEED to have a 440v system . If this is not allowed then please delete. Do your due diligence. If you’re local to Louisville Kentucky then this might be a good deal you for a Nuvair compressor and more goodies.
These are some of the pictures that were sent to me-





View attachment IMG_7526.jpeg





View attachment IMG_7523.jpeg

chas1969 said:

You will see soon. (Per Kady Kiwan- Atlas Airguns podcast)

Click to expand...

I guess I’ll just keep shooting JSB 33 grainers till that day arrives.
Thanks

Hi!
Got a 28 mm Gen2 Pro on FX M3 angled bracket, set on Regulator Mode but Gage shows no pressure changes after each shot.
Constantly at 76 bar. Any Ideas what's wrong with gage or setup ?

That is what I wanted to hear! Now I will order one. Thank you for your time.

cavedweller said:

I’d be more concerned with it being Russian? Parts etc…?

Click to expand...

They never fail so you don’t have to worry about parts, they are like the ole T-34 tanks

This listing has been renewed

beerthief said:

The gun should be taken apart and at the very least the leather seal should be re- soaked.

Click to expand...

And now you’ve opened up that can of worms LOL. You’ll get a lot of advice about what to soak it in. For that gun at its stock power level Abbey SM50 is good because it won’t diesel. A lot of people will recommend neatsfoot oil. Works well. But too much in that gun could cause dieseling. MDriskill posted above and is one of the folks I had in mind who know a lot about these old Dianas. Helped immensely with mine.

mubhaur said:

The plenum is for MPA stock that has longer space hence bottle size is not compromised

Click to expand...

I just don't want to remove the picatinny / arca extended rail that you would have to remove to fit the regular sized bottle

This is something I want do so bad ! I definitely have the equipment to do it . , when can I fit this into my busy "retirement" schedule ?

Bill_D said:

Bracketing the wind "for Scott" - if its blowing left to right - aim left - right to left aim right.

Click to expand...

I tried that, didn't work. Mostly it was blowing in a corkscrew, so I tried counter-rotating the barrel for each shot.