Damn, I wish I would have seen this sooner.

Latest on DAR: I pulled barrel, cleaned and inspected breech, transfer port, muzzle/crown and barrel as best I could. Found a burr on breech side of transfer port and a rough lead in to bore. Tried to clean up burr with grinding compound & fine wet/dry paper. Also cleaned bore again. Still get a wide group as per previous picture. Will try to get a gunsmith to look at barrel, someone with better eyes and experience. Thank you for the suggestions and support. db

I was hoping someone else would start making Notos parts. I made my own as I enjoy experimenting as a hobby. I do not make parts for others but gladly share what I have learned. I really did not see much interest in mods I presented so I stopped posting, but I have refined my tune some more. Next, I'll work with a lower reg pressure. The hammer I'm using is a 12 gram brass version. Think I'll try an aluminum one with a brass wear ring for the trigger for even shorter valve opening. All of my hammers have had a peek face about 90 thousandths thinner than factory to allow the light hammer more velocity impacting the valve.

This listing has been renewed

I've been back and forth with IA1350 and my sumo.on my panthera for slugs...sounds is different but no changes in accuracy

I got one,I like the Crosman Challenger2021 better, the Daisey 499 is the smooth-bore BB target rifle
I think the Challenger is better because it is more adjustable, both are very accurate,

woogie_man said:

I know what you are asking, and this the wrong forum.

I have done just this with a few when I was still into airsoft. It can be done, but again this isn't the forum to ask on.

Click to expand...

Yo can you dm me , i wanna talk something with you.

I have a Precision Mathews Lathe and am most pleased with it. Good quality for the money. Very good customer service too. If a mill or lathe is what you need, they would be a good choice. Don't forget looking at used ones in your area but shipping may be more than you care to spend for a used one that may may also require tooling while "PM" has pretty good package deals so to start out you would have the basic tooling.

Can anyone send a picture of what this is supposed to look like when properly assembled. Taking it apart and the springs and gears popped out of place.

How about using off the shelf Crosman and Benjamin parts?

Well to add to the FUN...
Chip and Gordy put their collective skills together...
They also came up their Benchrest version of the Mark 4 Trigger used in the Rapid!!
The Key pivot points pin rides in Hybrid ceramic bearing!!!!



I mill out the new Trigger arm. it Dovetailed to accept and adjustable Trigger Blade!!!!!

Thanks for hitting me back. I'm interested in understanding how B&W increased gas usage efficiency from their hpmax series to their semiautomatic S45. Airgun technology is evolving and it looks like they made an evolutionary step in it's design.

DOT only at the Noro supply that I use.

Lovely stock but the blue sound moderater looks cheap - should be black carbon to match the stock not some random shade of blue that doesn't match anything.

I already ate that one. Tasted fine. The larvae were kind of gross but they were only in the skin. They did not affect the meat at all.

subscriber said:

Yes, Mike; it seems the STL files have been removed. I wonder if it is grabcad removing "any 3d printable firearm receivers". Obviously this art is a pistol grip, but not any kind of bang-bang receiver.

Click to expand...

No telling what’s going on. just though the renderings were interesting.

Aristovertex said:

i cannot acces the https://airgun.world/index.html , do you know another website to find source for the cricket parts ?

Click to expand...

The only ones I'm aware of would be Charlie Frear at Georgia Airguns, or Airguns of Arizona.

Very well done. Enjoyed seeing everything I missed. Thanks
Nice auto return Field Targets @Martin3528

I am a big fan of the Discovery scopes. I have several of their high end models. All are great value for money and in my experience, as good as any I have used.

arizonapcp said:

At times I notice barrel will touch the bottle. Has anyone put a barrel band on their rifle? If so, did it have any effect on POI?

Click to expand...

Does it affect your POI? Mine doesn't touch and neither should yours. If you haven't yet, I would check to see if your barrel is loose or if your bottle is screwed in correctly and not at an angle. Those barrels are not supposed to move at all.

So you can buy replacement fiber optic for the sight of its just that broke. There are different sizes. Mines like 1mm.You can look up video on you tube but basically you take a lightener and heat the ends after sticking the new filament in and snipping the ends.

Eagle vision sells adapters for all three different AGT rifles. Luckily for you it should work. Just make sure you have the same intern baffle they show on the Eagle vision site. I bought my Original AGT Uragan King and it doesn't come with any kind of threaded end cap. You should look at the eagle vision site!

mcoulter said:

If you don't have a borescope, get one. Not sure what Mr. Mackerel has, but for the cost now a Teslong USB is a no brainer...

https://www.amazon.com/dp/B07TTQF24F?ref=ppx_pop_mob_ap_share

Click to expand...

That's the model I have, x2, they have been somewhat abused for a couple of years now. Im sure there are better units available, but likely at a higher cost point. Great customer service as well, the light stopped working on one and the seller was very quick to send a replacement.

jimi1971 said:

Thanks for all your advice, I decided to get a Nomad 3, since I will not be filling large tanks at this time.
Jking it has been sitting a couple of months in his basement, and decided against diving an hour to do the testing.

Click to expand...

Look @ GX CS4, bought one also, quiet, 5800 psi, ac/ DC. Guns AND bottles.MUCH BETTER CHOICE IMHO. More expensive and worth it.

Sirs.
I’m looking for a springer tuned in .177 for trying shot metallic silhouette and Field Target .

If you have one let me know.

Thanks for watching