Threads

HooXX DVM Airgunner · Dec 2, 2023

Does anyone have an STL (or other type of) file for 3D printing a .50 caliber slug or sabot for the Air Venturi/Seneca Dragonclaw rifle and Double Shot shotgun? I have one file & have printed a lot of those, but was looking to expand the types of ammo I can manufacture myself.

radjabatak · Dec 6, 2023

sjs said:
Thanks guys, helpful info there. But, nobody mentioned specific parts that are likely to need replacement. I guess seals would be one kind. Any other parts that are routinely in need of replacement?

I advice you to prepare for the orings... Find a thread and someone post the orings size for my m3.. And now i have all the orings to reseal my m3 with cheap price.. For the tools and lubricant is a must.. Don't use silicone oil or silicone grease for the thread.. Use it only for oring..
And also watch YouTube about your airgun.. Many information you can get from YouTube..

bdzjlz · Feb 5, 2024

Skout techs said with would work. I ended up with the open end of the cones to the back.

Dave_lee · Dec 2, 2023

AirForce 357 barrel 34 " or trade 457 barrel

luisberry13 · Dec 2, 2023

Hello AGN,

Looking to sell some pellets that I do not use. 4 seals tins of AA 16 gr, 2 seals tins of JSB Hades, 1 full tin of JSB Hades (no tape but never used, how they came from AOA) and two 3/4 full tins of AA and Hades pellets. Also throwing in partial box of FX Hybrids. My asking price is $135 via PayPal shipped USPS 2-3 day.

Zorbar · Dec 2, 2023

Thanks guys

TN_Yankee · Dec 2, 2023

Just pay attention to see if the pellet actually does come out or not. You really don’t want multiple pellets to get stuck in the barrel.

BlkAirRiflemanOfGA · Dec 2, 2023

I habe 3 tins of vintage Beeman .25cal pellets. 1 tin is still wrapped but I can't say it's complete. The other 2 I counted them as they didn't have the seal tape on them. The Crow Magnum has 113 and the Kodoak Match Extra Heavy has 185. They also have some type of green on them just to let you know. Will ship to whomever wants them for $75. Or, I'll trade for some Excite Hammer in .22 if you have some. Last pic is of what they are I'd trade for.

jsptech · Dec 6, 2023

Very nice! I am interested in your M3 but do not have enough posts to PM you.

Motorhead · Jan 4, 2024

Perhaps fit an o-ring that is tighter fitting ?

rong1966 · Dec 3, 2023

blas.m said:
I urgently need the diagram of the Benjamin Marauder Model BP2264R or some sketch to polish it, because I desalt it completely and I don't know how to place the regulator.

Place it right next to the valve with the plastic white part towards the muzzle end.

darylm · Dec 1, 2023

Ooooooops!

addison · Dec 1, 2023

I have a super nice commander for trade. Scope can be included. Comes with 3D printed high capacity mag and standard mag. Looking for .177 m3 or crown or daystate redwolf. Adding cash is no problem if needed. If you get scope I can give data over and all the holdover for dial shooting. Accuracy is a given with brocock.

CJGUT · Dec 5, 2024

Did you sell the clip or no just asking because im in need of one

bigHUN · Dec 2, 2023

Fluorescent zip ties

TN_Yankee · Dec 7, 2023

That's a very nice decision matrix, Matthias.

airgun_hack · Dec 1, 2023

dens228 said:
Out of curiosity how far out do you think the Hunters are accurate to?
I shot two squirrels today with them, first time shooting them after a little target practice.
The longer shot, about 40 yards into the wind seemed to make them drift more than I'd like. Still killed the squirrel dead though.

They are accurate in the Maverick out to 70 yards. I can confidently take out pigeons with no issues.

joeayv · May 17, 2025

I have a few 760’s but this is my baby. Brand new in the box 761xl. Somewhere in 72-74 I think if I remember correctly

Rawroots · Dec 2, 2023

marflow 777 said:
i bought a Ruger MK IV for laughs and giggles a while back mounted a short Weaver-Pic rail to it shot it a few times and bagged it
the trigger is horrible not just bad but horrible
saw something yesterday and got it out and retested and the trigger did not change in the bag damn LOL
found a video to take it apart and did so today changed the springs in the trigger group cleaned up the grease in there did some polishing put it back together and test
the trigger is horrible still, it has the dumbest trigger group i have ever seen, well maybe that is not true the BSA Scorpion is strange but wow it is great
never buy one of those Ruger's, even if it was free i would not what another
to tinkerer is to make or fix but not always, sometimes you just waste your time

I had a winchester break barrel that also had a miserable trigger, after several attempts to fix it, i gave it to a friend, he thinks it's great.

heavy-impact · Feb 17, 2024

Hawkeyehunter said:
Any chance you have future plans of designing a higher capacity plenum for the Avenge-x?

I don't know the design changes that were made to the X. I'd need to take one apart to learn it's possibilities.

Neu · Dec 30, 2023

This listing has been renewed

Marcusinfestus · Jan 16, 2025

I noticed my 880 shooting significantly better once I put a 3D printed supressor on it. I didn't give it mich thought at the time, but this all makes sense, given how tight the fit was...

shambozzie · Dec 1, 2023

Very hard to beat a scba that you can grab and go. Never to much air.

Dog · Dec 4, 2023

I dumped Royal Purple after first 3 hours, it has an odor running in my 2019 YH, but seems fine in my 200 psi shop compressor. I'm staying with Seco 500 unless another ester based oil catches my eye. None of the big dive compressor companies use the likes of Royal Purple, was a big hint. On the other hand you have many good people that cannot justify expensive oil in a cheap compressor, no? Me, I baby the YH...anything not to have to deal with overseas mail order.

KWK · Feb 26, 2024

A.G.R said:
The .25 were oversized in most . unchoked for sure. Webley only used choked barrels in the Longbow as they were Lothar Walther barrels . Over in the Uk ,the rumored to make a few short stroke 13 inch LW Tommys late in their last run .. I’ve not seen a factory one. Tight piston seals and pre flare the skirt and they are shootable in factory form

rebarrel and they are 100% different gun for the better. .
View attachment 439432 View attachment 439514 View attachment 439515 View attachment 439516 View attachment 439517 View attachment 439518
These are factory Patriots with Webleys so called walnut ..The top one is one I sold that was so blond I named it the Golden Eagle. , this latter just sold one bay for pennys I passed as I do not need anymore nor like factory stocks. I was surprised it sold so cheap.

View attachment 439433

View attachment 439519

View attachment 439520

View attachment 439522

My .25 Tomahawk barrel is 13"
BARREL

"2000-2002 production had 15” Webley barrels. From 2002, they had 13” Lothar Walther barrels (originally advertised as the “Carbine” version at slightly higher cost). Production, or sales, overlapped."

Quotation from here:
Post #3

Webley Tomahawk at Kempton

I was interested to see, on one of the tables at Kempton, a Webley Tomahawk. I have a Longbow so I was interested to inspect this rifle, which I had not before seen. At once, I could see that it was a larger version of the Longbow and it seemed to have a longer cylinder. I cannot now recall...

www.airgunbbs.com

Threads

Threads

Filter