I use these in brown..

They match my Bronze M3 and Backbone. They have given me no problems whatsoever and have performed just as well has higher priced rings I have used.

I have a .22 Marauder that I never use. Filled it two years ago, put it down, haven't touch it since. Tank is still full so no leaks!

Anyway it shoots great and is in nice condition. There are some very noticeable marks in the stock (on the bottom) from where I had a bipod mounted, most of which will be covered if you mount a bipod.

I am looking to trade for a piston gun of sorts. I dont know what I want exactly but am open to hear what you have. 10m guns such as 300S or Diana 75 would be great but so would something more full powered like an HW90 or even an ASP20. Once again though, I'm open to hearing whatever you have.

There is an ATN X Sight Pro Day and Nightvision optic currently mounted to this gun in the pictures. It is NOT included in the trade unless what is being offered justifies the added value.

KWK said:

Firetrucking springers? IDK

Click to expand...

Of course. What else could it be?

Oh, now I see the source of the confusion. I left out a few asterisks. My bad!

Looking forward to Extreme Field Target Florida Edition. I can’t usually get out to these events, but everything is lined up just right for this one. Specially that it’s in my own backyard in the South East.

I will be volunteering at the event, visiting with family, friends, & may even help out thinning down the invasive iguana population. Perhaps some Lobster Slaying as well.

I have a barely used Xbox Series X 1TB with COD Warfare game. Trade to a pcp. Let me know if interested. Thank you. $450 or so value trades.

Need to sell urgently my BRK Pathfinder in as new condition. Pictures available upon request as soon as I return to the Virgin Islands next week Thursday from my trip to the US. $ 1300 shipped insured to the yard for a killer deal ( paypal friends and family or add the extra change for paypal buying a product). Currently regulator set at 145 shoots around 24fpe and depending on the piwer setting I can get anywhere from 60-90 shots.

Any caliber considered.

This listing has been renewed

This listing has been renewed

This listing has been renewed

Humdinger said:

@Squirrelmageddon let's assume for the sake of this discussion that zeolite desiccant actually works at the input side. The reason dive compressors use zeolite after the water separator instead of before it is so the water separator can remove 99% of the moisture. The zeolite is there to catch that last bit of moisture that the water separator misses. Zeolite is almost impossible to recharge in a home oven because it requires several hours of baking at higher termparatures than home ovens can reach. Silica gel beads can be easily recharged in a home oven at 200 degrees F for 15 minutes laid out in a flat pan.
So even if what everyone is telling you is wrong and your input filter actually is working, it is not a good idea to waste zeolite removing the bulk of the moisture in the air before the water separator can do its job.

Click to expand...

I completely understand and concur that a water separator between the compressor and gun/tank is critical. My purpose of this post is to show the results of an idea I had to help prolong the life of the output filter media so that we don't have to use large output filters which double our fills times. This is important to everybody using small compressors that overheat in fills over 8 minutes. My new 300 bar 580cc tanks were taking so long I had to shutdown, cooldown, and finish off the tanks. It was a 15 minute process per fill. So I switched to a smaller filter which allows me to fill the tanks much faster. That created another problem. Those small 4" filters are too small to fill all day at the range. I had to carry desiccant with me because they completely saturated 1/2 way through the day. This project solved that issue. I can now use a small output filter all day. Problem solved.

Also, the reason I left the zeolite in instead of using the 20 lbs of silica beads I have was because I was going to throw it in the garbage eventually and didn't want to be wasteful. I wanted to get some runs on it and compare results with silica beads just for poops and grins. So I got my numbers, threw it in the garbage, and replace it with silica beads. Here's the results:

Silica beads dropping humidity level from 72% to 10%

I am going to hookup the small 4" filter and fill with that. I believe, judging from what I see, I can probably fill all day with that and just keep my 7" for when I go somewhere for the weekend and don't want to carry desiccant.

Sqwirl57 said:

Lets just put it this way. I have 2x of those guns. Both have had their mag systems removed and I single load them now. This probably won't come as a suprise to you but in both cases group sizes shrunk.

Click to expand...

It's been a known issue with autoloaders " damaging" the pellet that could cause a not so satisfying result. The Gen 3i was supposed to help prevent pellet loading damage .. but ya know ??...

Its a plastic shell with lead weights.

TXRMike said:

Good video. Your older HW95 videos introduced me to the mid-size / perfect-size springer. Maybe not perfect but I remember you saying it was your favorite. Now I enjoy my HW95 as my most powerful air gun.

Click to expand...

Yes by the time you scope it, it's a Absolute favorite, that and the 97K two different but must have guns

Is it accurate? Have you shot it over the chrono to check performance? You really can’t compare your guns “loudness” to something seen on YouTube. “Loud” or “not loud” is so subjective. The accuracy and performance check will basically be like a blood test at the doctors office. Will tell you a lot about the gun.

Falcon scope X50T, I can zoom in a target ring center at 100 meters and I can see the .25 holes at 200 sharp and clear. The entire zoom range from 10-50 is sharp and clear. Made in Japan.
Some internet sources claim both the Falcon and Sightron III coming from same assembly line ... I don't think so, I don't believe that.
I have compared the two side by side and you must be lucky won a lottery if your Sightron is clear at x45 and above.

Warning - if you do that on an Edgun R5M without raising the regulator pressure and you slam the valve with max hammer energy, you will break the valve. Even if you do also raise the regulator pressure, there's only so much shock that the valve pin can absorb.

Looking for a pcp .177 pistol for field target. Looking for regulated if possible or a 1720t. Any modified pistols also are fine.

Stubbers said:

Gotcha bud.

Hand Warmer

Click to expand...

Interesting idea

FX pellets are made by JSB so they should be of good quality. My buddy just bought a tin of the .22 JSB Exact Jumbo's 15.89 gr and they shoot great out of all of his rifles.

This listing has been renewed

It's a Hawke Sidewinder 30 6.5-20x42, it was my favorite scope and reticle when I was all about airguns. It will come with a pair of FX No Limit adjustable rings, for the 30mm tube and fits to a dovetail. I had this on my Steyr Rimfire, but recently sold that. It's in great shape, glass is crystal clear and reticle is sharp. The battery is completely dead from me leaving the illumination on. If I can find a battery I'll change it. Comes in the cool old school hawke aluminum case which is no longer a feature of these scopes. This is a screaming deal at $300. If you want it, please call or text me at 865-773-2255 as I'm not getting notifications on my phone when you PM me on here, for some reason. It used to work like that, now it doesn't. Thank you. My name is Robert, from Oak Ridge Tennessee.

I've got a few lol
Ataman M2R .35 and .22
Compact .25
And two AP16 in .22

I have for sale a excellent shooting and condition Rapid Air Weapons HM1000 12ft lb rifle. This action is set in a CS 1000 walnut stock with adjustable cheek riser and has a anschutz rail installed for your favorite knee riser if you shoot field target.

This rifle is extremely quiet and very accurate. I have won 25 yard indoor Benchrest matches with this rifle as well as Field Target matches. Rifle is in excellent condition and I cannot find any marks on stock. This has a 400cc aluminum bottle and gets over 150 shots per fill.

$1900 + actual shipping.

I have sold many rifles and equipment on here and am well known in the field target community so shop with confidence. I can answer any questions and am open to phone conversation about the rifle. Fastest response is through email [email protected]

Sincerely
KeithWalters