Threads

PEP3 · Nov 4, 2023

Nice guns to choose from and some pretty good shooting too.

Sawney Bean · Jan 23, 2025

beerthief said:
I am thinking about another TX200 to play with IE: open the loading port a bit wider ? that would weaken the gun for cocking , might bend if modified too much maybe need to weld steel strips along the bottom of the tube opposite the leading port ? I have lefty versions of the TX and the loading port is already wider on the left side .
OR make a drop in piece that would guide your finger tips /pellet into the correct position , this sounds like a more doable project . .

I recently picked up a Diana 56 TH and the difference in ease of loading between that and the TX200 is night and day. The 56 isn't much trouble at all to load, while the TX200 is a PITA.

Michael · Nov 3, 2023

Ranchibi said:
...nice vid and, well, great shot!

thanks!

coastal drifter · Mar 20, 2024

gfmiller58 said:
I've been round and round trying to find a slug that would shoot well in my Wildcat MK3 BT Compact. I've tried at least a dozen different slugs of varying brands, diameters and weights but never got the accuracy I was wanting; until yesterday. I tried the H&N HP2 slugs, 0.218" diameter, 25 grain weight. At 50 yards outside on a calm day I was consistently hitting the 1/4" square bullseye on my targets. Groups were consistently 1/2 MOA or better. This is twice the precision (half the group size) of any other slug I've tried. When I got home I ordered a dozen tins.
I'll have to work out my ballistic drop vs distance chart, then any small game or pest inside 50 yards is in serious jeopardy!

I have tried H&N hp2 in my Impact with great success also, (.217 27gr)

GooseDog · Nov 5, 2023

thomasair said:
The Italian 50m Unlimited Air Rifle Championship match took place last week. There are 7 qualifiers throughout the year and the championship is the battle of the top 20 qualifiers.

Giovanni Atzeni took an easy victory posting a 33 point lead over second place using his 22 caliber Thomas HPX. Carmen finished 3rd… but did so using her 20 fpe .177 Thomas BR. That’s some strong wind reading !!!

Many thanks to both of them for their dedication to the sport and their choice of Thomas Air rifles.

Mike View attachment 402595

Congratulations

Dr. Kralenstein · Nov 12, 2024

upandatum said:
hi i know its a long time ago but in need of a hammer for my kral jumbo hi cap have you still got one please or do you know where to get one im in the uk but theres none in stock anywhere

Here's one on ebay that will work.

KRAL Puncher Jumbo Hammer | eBay

Find many great new & used options and get the best deals for KRAL Puncher Jumbo Hammer at the best online prices at eBay! Free shipping for many products!

www.ebay.com

Airgnr_Ind · Nov 3, 2023

Sir, I am greatful for your reply. Warm Regards

rodjava · Nov 5, 2023

Great intel. Thank you

Biagio26 · Apr 24, 2024

I recently bought the Hornet ED 10-50x60
I have not received it yet, because it comes from Germany, I paid 700 Euros, which was a decent deal, still waiting to see if it will stack up the the Diamond 10-50.

Not sure why Nikko Stirling discontinued that scope, because it was an excellent scope for FT.

Stubbers · Nov 3, 2023

GA_LeadHead said:
Regardless, The screws that came with the adapter FROM FX, were the incorrect size. For the record. The head size on the x45 I ordered from Amazon is exactly the same size/type as the ones that FX sent. The length was the issue.

It's unfortunate for the end user that much is certain!

PumaCarl · Jul 26, 2024

I really get what you're saying, it's just this sport has so very many delays, with everything, that I don't wait and hope any more. Life's too short, unforseen circumstances pop up more and more, so strike while the iron is hot, you might not get the chance later. This pretty much applies to everything, if you can pull it off.

Squirrel hunter · Mar 24, 2024

How about this one ?

jrworkman · Nov 3, 2023

Here is where I found the best price for Huben GK1 Thread Adaptors:

$23.85 delivered!

Frank in Fairfield · Nov 4, 2023

Bell targets.
I have ABC Targets with holes from 1 1/4” down to 3/8”

BackyardSniper · Dec 2, 2023

Flash_The_Floof said:
You think that's the same stuff? It doesn't say HIGH PERFORMANCE but I figure maybe they just changed the label???

They both say non-detergent which I think is the important distinction for airguns. I learned a lot from this thread and now have a couple different lubes/oil for various purposes

SonOfAGun · Nov 30, 2023

Ezana4CE said:
@MAUMAU Could be impatient or prioritizing his/her post count.

MAUMAU ... lol

.20calguy · Nov 3, 2023

Johnny Breakbarrel said:
Those are beautiful, I should have specified when I said “foreign” I meant “crappy foreign” not “Swiss watch/Mercedes Benz foreign” I’m 100% onboard with a German or Swiss made air rifle

Yes sir.
I figured that those people only had airguns to shoot, while a majority of Americans figured them as toys after the war.

Grassguy12200 · Jan 23, 2024

The. 25 Cals were good. But the. 30 and. 35 were terrible. I resized them in a pellet resize and now they are pretty good. They are dirty as heck. Metal shavings and just nasty. But they are cheap.

KausHawj · Nov 3, 2023

Anyone have an edgun leshiy 2 350mm barrel they want to sell?

Seki1020 · Nov 3, 2023

I have 2 accu-tac bipods that I don't have use for.
1 FC-5 G2 .. asking. $250
1 LR-10 G2.... Asking. $240
Located in Albuquerque NM. But willing to ship in the lower 49. You pay shipping and we can do PayPal for. Thank you

Bosk · Nov 10, 2023

This listing has been renewed

Motorhead · Nov 3, 2023

Passages are small, Adjustment screw at trigger guard needs to get sealed ..... Follow the air flow and do what needed.
It's not an easy process, so think it threw

air-hunter_canyon · Nov 2, 2023

Kraford and lypt L-tech

air-hunter_canyon · Nov 2, 2023

Looking to buy a fx m3 .22 barrel tensioner kit

Chuck-in-Ohio · Dec 12, 2024

Luv2hunt said:
I realize this is an old thread although for those interested I found this seller and purchased the cup for my Model A. They are as close to original as you'll find anywhere and it worked like a champ.

Sheridan model A/B Original Style Pump Cups | eBay

Find many great new & used options and get the best deals for Sheridan model A/B Original Style Pump Cups at the best online prices at eBay! Free shipping for many products!

www.ebay.com

I bought a pair for myself, just to have them on hand. They are absolute quality, and appear to be identical to the OEM cup.
The Seller James V. also has a lot of other hard to find parts, and I have found everything that he produces to be of high quality.

Threads

Threads

Filter