Here's a 10 month old TX200 Walnut Lefty Hunter Carbine. Zero issues. Shoots great. Not much else to say.
I bought it new and because of my age(health) I cannot cock it anymore and I don't have any kids to pass it on to.
It has had a Vortek piston seal installed to replace the original seal. There was nothing wrong with the original and it will be included.
Very nice rifle that needs absolutely nothing.
Shipped in original packaging with paperwork and manual as it was to me from Airgun Depot.
Text or call 3252347979 or PM
Thanks for looking,
Norris

JohnL57 said:

The Marauder should do fine. Do you have any bags or a rest to shoot with? Your rest set up is pretty important in benchrest. Make sure you are zeroed in at the distance you'll be shooting in advance if possible.

Click to expand...

I plan to use my marauder to shoot 25mt, since it’s unregulated, I do have a bipod and I’ll borrow a set of shooting bags from a friend, for 50 mt bench rest I plan to use a n air Venturi avenger (was thin of setting the reg at about 140bar and shoot either 18gr jsb pellets or th 25gr jsb at 850-ish

My FX Royale 400. Possibly the last walnut stocked one made based on conversations with FX in Sweden. Yes, it's a blast from the past but this particular airgun has a really great trigger, it's quiet to shoot and accurate as can be. I give it a slight advantage over my Taipan Vet .22 Std.

My experience with the Huntsman was good, but nothing compared to a regulated gun. The harper vale saves air by controlling hammer bounce. It really doesn't do a lot to flatten the curve. Just look at the shot strings posted. I guarantee you that adding a HUMA reg would cut the es by 60% or more when properly tuned. My Brocock has both a harper valve and a HUMA reg and can hold an entire shot string from a 480cc bottle to an es of 10fps (actually 9fps for 75 shots at ~900fps avg). Best of everything is having both. That's 1% es! Try even coming close to that with an Un-reg'd Huntsman, and yes I have a Huntsman.
All of that is not to say Un-reg'd guns aren't good, but the only ones I've tested that held their own with a reg'd gun were Air Arms rifles. I've had them apart and they have that brass tube at the plenum that slows air intake during the shot and they have a fantastic flat curve.

Original Weihrauch Diopter rear sight. Excellent condition. This rare sight can be had in either 11mm or 13mm. 11mm fits all Weihrauch/Beeman rifles for the past 40+ years. As shown, I happen to have both bases. In a minute everything switches to either. This offer includes ONE BASE ONLY! Buyers choice. The fabulous feature (to me) on the Weihrauch diopter is the built in stop designed to fit one of holes on the receiver. And they just look elegant. These original Weihrauch Diopters are very scarce anymore. Always expensive, even 40 years ago. But nothing like owning one if your passion is Weihrauch’s. This is an extra to an extra and I’m funding another project. I generally never let these go. $200. $10 shipping. Continental U.S only! Pay Pal or U.S Postal Money Order.

Lol! Yessir, it’s the same rig! Played musical scopes with a couple high end powder burners, but I got itchy getting on to the next thing kinda quick. This .177 Kratos did whack a starling at 94or 96 yards though on a super lucky shot.

$47.50 shipped or trade for 3 of something else.
I can always use certain pellets.
PayPal F&F, PM me for information.

The length of the threaded section is 8.75 mm?
The thread is metric with step .70, And the entire length of the workpiece is 10.875 inches, is that how I understand everything?

Airgun Oregon based in Ashland has product as well.

I have a .25 Bobcat .MKll that I'm reluctantly selling..
Its an amazing rifle that to my knowledge has been sold on AGN 3 times.
Every previous owner to this rifle has DMd me about wishing they didn't sell...Ill probably be the next one..
Some of you may know this rifle by the unique cheek rest on the riser.
This rifle is a laser, comes with a regulator
pre-installed, holds air forever and has a dial for low or high power.
Low power its whisper quiet and you can shoot most of the day on a single air fill.
On high power you have a small to medium game hunting rifle.
This rifle has a built in suppressor, upper picatinny rail for your optic and a lower picatinny rail for bi-pod/ flash light/ foregrip or whatever else you like.
Comes with a fill probe, silicone grease for fill probe, O-ring repair kit (never needed), 6x single shot trays, 4x 12 shot magazines 3x OEM and one aftermarket that loads the opposite direction, this rifle can seat one mag in the breach and 2 in the stock which is awesome when out in the field so you can get 36 shots with no additional gear in your pockets. All of this will be kept safe and secure and shipped in the padded foam hard case from Utah Air Guns.
Has 2 small blemishes one on the barrel and one on the stock.
I'm including the mounted ACOG optic at no additional price and I will throw in 5 tins of
H&N Barracuda pellets, this gives you 750 rounds to get aquainted with this rifle.
Never in my life have I owed money to the tax man but he's knocking with his hand out so time to thin my heard.
Shoot me a message if you are interested.
I'm asking $750 shipped in the lower 48 for the entire package.
I accept PP FF, Venmo or Money order.
Check my feedback in the members area, I'm usually just a buyer, saddens me to be a seller this time.

This listing has been renewed

Looking for a R.H Beeman R1 stock in good condition . Please send pic’s and asking price.
Thanks..

Well leave to Jerry to screw things up - I was all set up to make his "Dead Ass Last" award then he decides to come in second.

Good shooting buddy - hope to see ya in Texas

OndrejD said:

So had the same issues as you. No mic trigger and when I set the unit to arm it just started to record shots... using back yard not inside

change my settings to the following and it was fine after that
Power - low
Trigger - doppler
Handgun setting
Trigger set to Trigger 1 sensitivity

Put unit back in middle of airgun with barrel suppressor in beam and basically next to barrel. Did not miss a shot or read funny readings randomly... don't want to fork out money for the mic Trigger...

Could not see why it would not work but happy it is now..

Click to expand...

Oh and one last thing update the firmware to the latest version. could also be an issue.

bdzjlz said:

I have no idea which liner I have. The rifle is as stock for Utah Airguns. The average speed measured by the chronograph six inches from the muzzle was 905

Click to expand...

Ok, so you have a 600mm setup. You wrote 700mm on your target. Perfect speed for those slugs. I have pretty much the same setup in a Panthera and shoot them at 885 to 890 with reg pressure at 135 bar and micro at a hair over 3.5.

This listing has been renewed

SacramentoSam said:

Just 3mm 308L. PM me your address and I will send a pin your way

Click to expand...

Does the rifle like any slugs in particular? I just shoot the JSB Exact 25.39 grains in my other 25 cal rifles.

EmptyTin_Tim said:

For sure, have had 2 friends use the warranty and it's just amazing. The only bummer is that basically all of their products are lacking features other manufacturers have implemented for a long time (regulators, side lever cocking, etc). That being said I love my 1077, Vigilante, and 2240XL.

Click to expand...

Check into @Airgun-Revisions Rich Dudek does amazing work on the Crossman/benjamin products he sells, this HFT Challenger is a fricking laser

qball said:

Voting membership does not cost more but does have additional requirements mainly around annual volunteer hours.

Here is the application form with the requirements: https://www.sacvalley.org/about/membership/

@rodjava, no one is going to invite you to private range and wait while you shoot. I've said this before: It's best to join the matches and there are a ton on the calendar and do NOT require membership at all then make some friends with similar shooting schedule and interest. Only other way is to wait and put the volunteer work. One good thing since you live far is there is a camp ground at the range for members and special events, you just have ask.

Click to expand...

Qball,
Thanks again.
Yes, I have sent in my non voters membership as well as aligned myself with the Sloughhouse Long range shooter group. I even plan to volunteer on their next match on Jan 21. Since neither of my long range guns have the sub sonic velocity at the 600 or 1000 yard electronic targets, In addition, I won't be able to shoot at their match because I shoot tethered.

I was somewhat hoping to practice -benchrest- long distance shooting with a voting member at range #12. One who is already planning the same practice shots at a distance I am also capable.

I will put in my 1 years time as a non voter as well as join clubs that have matches at ranges #6 and #12. Then apply for a voters membership after 1 year.

My only other option for practice long range shooting is a 3 1/2 hour drive to public range San Luis Obispo. It's 2 1/2 hours to the Sac range.

Rod

In my country, being able to understand, let alone speak insgrish, is a great feat on its own.

Looking to upgrade to something a little more compact, as I will be carrying it around to hunt iguanas on job sites. Both have about 30 shots through them Can add cash for the right trade. Looking for fx compact

This listing has been renewed

Will615 said:

Update: bink2 was right. The GRT 111 trigger fits my rifle and it's a HUGE improvement! Thanks very much!
Will

Click to expand...

Glad it worked out for you Will. IMO For around $130.00 [including the trigger] makes for a not to bad pinker.

Hello

Gee, I detest gun clubs. You always get a bunch of legalistic officers that throw their weight around using chickenpoop rules that make no sense. Otherwise, it appears that y'all had fun. I wish I lived closer so I could compete with you.