Threads

18.13 · Jan 28, 2024

My point is, do a search and you'll find lots of info. My opinion is your probably just going to have to try it and see

farmerjoe99 · Feb 9, 2024

This listing has been renewed

THREEDFLYER · Jan 25, 2024

Offering up this extra nice Sheridan Blue Streak Model CB with original box for your consideration.
Based on the S/N it was built in 1971 and has Montgomery Ward labels on the box.

Caliber is .5mm/ .20 Cal and I have not shot this rifle personally.
It came to me along with two early Crosman rifles as part of an estate that I purchased this past summer.

My price is only $350 Shipped for this one. (((((Based on COMPLETED eBay auctions I feel my asking price is very fair on this one)))))

Payment to be Friends/Family PayPal, ZELLE or USPS Money Order

First "I'll Take It" followed up with a PM containing your contact info gets this.

**NOTE** Although I am new to this forum I am very active on GunBroker and the SWCA (Smith and Wesson) forum under the name THREEDFLYER and you can check my feedback there. Please contact me with any questions and I can provide my direct email address and phone number.

Ed24 · Jan 25, 2024

Nice! I'm always looking on AOA and didn't notice this one. I'd like to know a bit more about it. Hopefully someone has it already and can let us know???

Backyard AirGuns - Mike · May 30, 2024

OneLeaf has a great Father's Day Sale from now to June 23rd.
The NV400 is on sale for $424. Below is my affiliate link for the scope...

Commander NV400 4-52X50 4K Digital Day/Night Vision Rifle Scope

Experience unparalleled clarity and precision with the Commander NV400's ultra HD 4K CMOS sensor and cutting-edge objective lens. Capture moments in stunning 4K, enjoy smooth zooming capabilities, adapt to any lighting condition, and explore a range of advanced features for an exceptional...

oneleaf.ai

TYLERHASKINS2 · Jan 25, 2024

I have a Benjamin akela in .177 up for trade. the hammer spring has been cut down, with 10.34 hades on low power the fps is around 750, and on high power I have gotten up to around 20fpe, but I wouldn't recommend going that high on power. the gun will come with 1 magazine (2 if I can find the other one) and shoots very well. I have used it to take care of pest birds past 50 yards. the gun will not come with a scope (open to negotiation). I would like to trade into something that fits me and my shooting style a bit better. I would be interested in a marauder in any caliber, or anything cool honestly. I will only ship within the U.S. let me know what you got!

markhooper · Jan 2, 2025

markhooper said:
yes it's the only PCP pistol that I have held that felt right beside my friends huben GK1.. I think I might try to adjust the hammer spring a little bit less as it's got plenty of power.. 2 magazine full but the last shot usually sounds full auto.. it's just air from hammer bouncing.. definitely a plinker, and I regularly shoot a 3"spinner at 30 yards.. only open sights..
PM me and we can talk more about it or other guns sometime..
Mark

I also made a cloth holster for mine but I wish the gauge was on the bolt side or better yet on the end of each tank so you can always tell if you filled it without putting it on the gun
Mark

DR OF AIRGUNS · Jan 25, 2024

Donnie, FL SHOGUN great working condition has some scratches from normal use probably doesn’t have 250 rounds through it, but it does have some scratches, but nothing affects the performance. $I40.00 delivered to your door… except Hawaii, PayPal, friends and family only have excellent reviews on here and excellent reviews on eBay.

Bassett · Mar 3, 2024

This listing has been renewed

Bernie7 · Tuesday at 8:24 PM

This listing has been renewed

SkeeterHawk · Jan 27, 2024

Peashooter said:
if we could contain it

I just had a thought. Perhaps you could use both parts of the pellet tin. Punch about a 3/8" hole (< 1CM) in the top and put a rolled up paper towel in it. Fill the tin with fuel and light the "wick". You could then just aim for the tin, and when you hit it, it would blow the liquid all over with the flame right there. It would have to be something pretty combustible.

Peashooter said:
but it must be responsible fun.

I agree. The time I shot an exploding pellet at a flammable compressed gas can, I did it while it was raining.

Contndr35BB · Feb 9, 2024

CognizantHydra said:
I posted earlier this week about the magazine of it getting in the way of the red dot and another user here, FLgunner, said to get a riser for the dot, which has arrived.
The rifle and the other stuff I needed for it are coming in tomorrow.

The reason I ask this question is because I was watching a youtube video that said budget air rifles don't do well with slugs. But does the Flash do well? The slug in question is the H&N Grizzly (31gr). I ordered 3 kinds of pellets, including those. The next heaviest is a standard pellet shape; the H&N Silver Point (24.38gr).

The pellets on the hatsan website state a minimum muzzle energy while the rifle only says its maximum.

Can anyone help me out?

My Hatsan FlashPup(.22) does quite well w/ JSB Knockout slugs to 60 yrds. I've taken several G-hogs w/ them cleanly at~ 730 fps.

ThomasT · Feb 1, 2024

This listing has been renewed

wendell · Jan 26, 2024

UDABEGGER said:
Thanks Wendell.Good info just one question.Do the avengers tear down any where close to the marauders in simplicity.I know there are good vidios out there but I still get a little sheepish tearing into something on warrenty.Thanks again!

If your Avenge X is under warranty, I will make the proper contacts for repair or replacement. Avenge X is very easy to work on. Empty air first.

Justaguy · Apr 27, 2024

I owned a $50 Chinese hand pump. It worked great. I didn’t use it long. Hand pumping gets old really quick.

Huncowboy · Dec 20, 2024

This listing has been renewed

yenniedn · Jan 25, 2024

THREEDFLYER · Jan 26, 2024

Wadcutter said:
Thank you for the serial.
If you have a caliper tool handy, would you mind measuring the diameter of the thumb screw that holds the cover on?
There's two sizes _ either .503 (1/2") or .565 (9/16").

If you are referring to the thumb screw on the 102, it measures right at 1/2" or just a touch over.

The 140 pumps up and seems to hold air, but the 102 does not seem to be holding? I would imagine it needs new seals??
I found this kit online.....would it be correct? Anyone done this and can give me tips??

Crosman 100, 101, 102, 103, and 104 Seal Kits - Baker Airguns

You may need a T1 / T5 Tool for Crosman to install this kit. Select options below.

www.bakerairguns.com

Also, anyone happen to have a PDF copy of the owners manual for the 102??

1900colt · Jan 27, 2024

I've used mine. I have a lot of dies for it and it does work... found a number of undersized pellets using that (some would fall right through, others would need the plunger.

Set it above pellet tin lids to catch the pellets. Better and faster than without that stand

dennisto12 · Apr 2, 2024

RobertoCellis said:
Education is truly necessary for everyone, regardless of their field or profession. As someone who is passionate about nursing, I have learned the importance of lifelong learning in healthcare. I recently took up nursing research paper writing to expand my knowledge and keep up to date with the latest developments in this field. Education empowers us to make informed decisions, provide better patient care, and make meaningful contributions to our respective fields.

You said an interesting idea, something to think about!

humbled.ag · Feb 11, 2024

No worries Chas, It will be a pleasure seeing you when you can make it.

sticman77 · Jan 25, 2024

new never mounted ATACR 4-20 F1 Mil-XT, has everything it came with. decided that this thing is too heavy.

$2150 shipped

Treefrog · Jan 25, 2024

Looks good! Much nicer than mine.

I never have understood why they put such low combs on so many scoped rifles. Is being long-jawed and low-cheeked a requirement for stock-design engineers?

Cheers,

J~

madeintheuk · Jan 25, 2024

As the title says, used but looks new. Comes with 30mm pic rings.

Asking $500 shipped

Thanks for looking

Message for pics or more info.

madeintheuk · Feb 3, 2024

This listing has been renewed

Threads

Threads

​

​

Filter