DonEnzone said:

Will do! I can dissassemble GK1 pretty much entirely, but fiddling with the barrel has been the only thing I didn't want to mess up haha.
Perhaps it's time to finally give it a try. Thanks!

Click to expand...

When I first dissasembled I found out that the two alignment screws had gone loose, out of the four that hold the barrel assembly in place, so it pays to at least check, occasionally.
The easiest way to realign is to use a very tight fitting slug, half inserted in the barrel; I used altaros smooth 6.46, which has the added advantage of having a connical butt.

Rick Housel said:

Ich versuche, Ratschläge zu bekommen. Ich versuche, mit meinem Benjamin Bulldog ein schweres Geschoss für die Hirschjagd zu bekommen. Ich möchte ein 142-Grain-Geschoss abfeuern, aber wenn ich über 125 schlage, springt das Geschoss ungefähr 6 Zoll zu weit, als dass ich es mit der Zielfernrohreinstellung zurückbringen könnte. Hat jemand einen Rat? Der Typ auf dem Schießstand des Luftgewehrschießstandes, auf dem ich schieße, meint, dass die Drehung meines Laufs vielleicht nicht schnell genug ist, um das Geschoss zu stabilisieren. Irgendwelche Gedanken dazu? Wenn ich mir die Waffe auf YouTube-Videos ansehe, scheint sie problemlos 145-Grain-Geschosse abzufeuern.

Click to expand...

Only Benjamin Nosler Xtreme ...

Cloud9AG said:

Yes they are all glued together. If a shooter desires a shorter barrel for some reason, I recommend that they contact Martin Rutterford at Airguns USA to order that custom barrel and gun configuration. Once again, my FT pistol will shoot one ragged hole at 25yds and .175" CTC at 35yds, so I see no need to alter anything.

Click to expand...

I'm sorry I guess I misunderstood that it was too long for your competition and I thought that was the only reason why you needed it shorter and I thought above that you couldn't get what you needed to compete, so I was just trying to help you figure out a way to get what you needed..
if it is ok for your competition then there's absolutely no reason to change it.
Mark

" if so it might make me get my first FX"

yea the Pro has me thinking the same thing.... I have been resisting the pull of FX so far, but that offering is wearing down my defenses...

bucketboy said:

Nice

Annoyingly, we can’t get the shorter chassis in the uk, it’s a shame because I am absolutely sure many Theoben Rapid owners would love to fit their Theoben blocks into one

Bb

Click to expand...

Such as this
MFR at 12 fpe, barrel a 15" with slip on LDC.
Unscrew butt, Slide off LDC, Slide off hamster it becomes a Legal AAFTA FT Pistol

As new DonnyFl Sumo. 1/2x20. Exit hole is .30. This Sumo has the very small vent holes in the body which I though worked better than one without when I had both. Be happy to ship more photos if needed but there is no marks. Or would trade for a Huggett Belita. $125 shipped in a USPS small flat rate box packed snuggly. PayPal F&F or you pay fees.

Salvaged the parts I needed for my newest build, so the leftovers are up for sale.

Tube holds air perfectly. Barrel isn't picky at all, shoots crosmans and jsb very well. Finish isn't the best, but nothing major that couldn't be simply painted over.

Internals are all stock, barrel grub screws upgraded to 1/4-20 stainless. New barrel o-ring.

Has a functional carbon fiber shroud and an air stripper. Comes with 3 extra baffles so you can adjust to your liking. Plenty of length on the shroud to cut to desired length with your stock trigger/scope riser block.

Will also come with 2 magazines.

Perfect for tinkering for more power, or caliber swaps. It's worth it just for the shroud parts really.


$100 OBO shipped CONUS only

PayPal, CashApp or PMO accepted

Shoot me a PM
Thanks

Chukar60 said:

100 slugs is not enough to settle the gun usually. I generally will not attempt a serious tune until at least 500 shots down range and prefer to wait more than that.
With the Dynamic block all adjustments need to be in small increments. Much smaller than a lot of people are used to. A few bar or one click of the micro wheel can make significant changes.
How did you arrive at the settings you showed?
Were it me I would be starting with a lower reg pressure than 130, maybe 110 and the micro at around 2.5 and work my way up from there.

Click to expand...

Corvid_hunter said:

From what I've read the reg likes to be on the lower side. You could try starting out at 100 bar and slowly go up from there.

Click to expand...

I will take this advice and move the Regulator down. The pressures I started at (130 came from a Panthera Video as did the 150) I'll also keep attempting to dial it in as the slug count goes up. Huge appreciation

Yorkie said:

This is not my reg but I put a shallow groove in the surface (red line) so the air can pass out from the central hole. It may be better if you could arrange the groove to be inline with the small exit hole in the block (see my previous pic).

View attachment 463022

Click to expand...

Thanks. I’ll have to look at mine when I have it out next time. I think I can angle the output hole enough on the lathe to help it breathe into the little hole.

SpringfieldScooter said:

FX has a brand new product due soon, in March.
Its begining to look like you will be able to pick one up, brand new, with a synthetic stock, for $999, and still remain under budget.

View attachment 430565

Click to expand...

How much is it with the wood stock? Because that is the sharpest looking gun I’ve seen

Snow Peak M60b .22

Shoots jsb redesigns like lasers and hits hard. Only had it about two months enjoyed hunting with it. Really just wanted to try out a budget gun and see how it measured up. Now with new toys on the way this one will get set aside.

The only change I made was bumping the reg up to about 150. This version has a foster fitting for fill instead of removing the bottle.

500 shipped. No trades

Snowpeak m60b 22cal.. nice shooting gun works as it should.. $ (SOLD)

kral empire xs 22cal.. tuned by troy hammer.. great gun .. $400

PayPal friends and family only..

I have airforce condor 25. For sale or trade like brand new
2295892550

This listing has been renewed

All colors & all calibers! Impacts have been flying off the shelves, all brand new stock along with all other models. Nick here with TopGun-AirGuns, contact us and check out our website! https://www.topgun-airguns.com/

Certain 22 cal slugs will get wedged in the avenger barrel as its tighter than most guns for some reason.
But it also makes it accurate.
A 218 will not go through a 216 does and even that might be on the big side.
Hence start at 216 and go smaller if required samo.
Dont expect stunning results either first time round' you need to test different diameters and grain ' to find what works for your gun.
The avenger can shoot a slug well.
You shouldn't have to force the cocking arm at all why loading " but I also know from experiencing it myself the bigger slug will load quite normal but then refuse to leave the barrel.
Hope you find this helpful

that looks nice.

I am pretty happy being able to hold most of my shots on a 2" marker at those distances, but maybe i should man up and get some 1" ones too.

Also moving bench this year, so will be able to shoot out to 130 M something i am exited about but very much doubt a 2" marker can do it, so maybe 3" for that.

Both of these 2 groups shot at 86 M , that up / left shot, last one of course.
My only comfort is at least in both groups the deviation on those last shots seem the same.

This listing has been renewed

Bushnell Elite 3-9X with doa reticle, one inch tube. Comes with scope covers. 150.00 shipped. Payment by paypal FF or USPS MO.










Adjustment Click Value: 1/4 MOA
Adjustment Type: Click
Exposed Turrets: No
Finger Adjustable Turrets: Yes
Turrets Resettable to Zero: Yes
Zero Stop: No
Turret Height: Low
Fast Focus Eyepiece: Yes
Lens Coating: Fully multi-coated
Warranty: Limited lifetime factory warranty
Rings Included: No
Sunshade Included: No
Sunshade Length: N/A
Lens Covers Included: No
Power Variability: Variable
Min power: 3x
Max power: 9x
Reticle Construction: Glass-etched
Illuminated Reticle: No
Holdover reticle: Yes
Reticle Focal Plane Location: 2nd
Parallax Adjustment: No
Finish: Matte
Water/Fogproof: Yes
Shockproof: Yes
Airgun Rated: No
Objective Bell Diameter: 48mm
Ocular Bell Diameter: 39mm
Eye Relief: 3.3"
Max Internal Adjustment: 50 MOA
Exit Pupil Diameter: 13.3-4.4mm
Weight: 13 oz

Bernie7 said:

Just for clarification, would you advise doing this by hand or with a power tool? I’m almost thinking it makes sense to do this by hand given the small scale

Click to expand...

Either would be fine. I would advise using a small diameter countersink to avoid the upright ‘wall’ close to the hole. A variable speed drill would be fine and still give you the level of control you need.

A countersink cuts relatively slow so just check your progress as you go. It doesn’t appear like it will take much effort.

Dave

This is a 1/4” size that would work fine.

$140 delivered to your door excluding Hawaii looks like brand new has one tiny little scratch that is barely noticeable. These are the finest moderators, and I have tried them all.

This listing has been renewed

I made a suppressor and a thread adaptor for my Cricket rifle a while back and I just left the adaptor and end caps on the suppressor as machined. A couple days ago I powder coated the end caps and the adaptor and I think it looks much better now. I have tried several other suppressors on this rifle but for some reason it shoots the best with this one I made, it must be doing something with the harmonics of the barrel so it's definitely going to stay on it for now on....

Atleast with the alcohol flush attempt, if it needs rebuild it will already be cleaned inside