Need a donnyfl moderator adapter for a 16mm barrel thanks.

This listing has been renewed

This will be book marked, and shared whenever the subject comes up. Thank you Phil(two l's?) and Tyler.

Peashooter said:

Reading this thread make me worry about the cheap ass Chinese valve i got for my 9L carbon fiber tank

Click to expand...

Got one of those too for my little buddy bottle, but to be honest it is actually a decent little valve at around $50.

This listing has been renewed

Valve is leaking through the weep hole does anyone work on these? I've replaced all the orings to no avail. And I cant find a new one for sale. TIA

I shoot slugs because I want to dump alot of energy quickly and expand rapidly. Also can shoot higher speed so less drop. Pellets don't expand much at all so shooting critters with pellets do less damage and just pass through, not a problem with headshots but slugs better on vitals. Here shooting a Pulsar .177 16.5 grain slug @ 894 fps / 29 fpe on squirrel 38 yards away. I was off on my ranging so hit in neck instead of head but the slug broke his spine, followed it down a bit and almost exited left shoulder.


As far as accuracy these are 10.03g slugs moving 1019 fps / 23 fpe...target at 50 yards, 1/2" groups. Those circles are .75" (and the 16.5g slugs actually group slightly tighter)



Those 16.5g Varmint Knockers are new for me, just trying them out. Think I like the 13.43 JSB Knockouts slightly better and they group same, dime size and under @ 50 yards and great expansion.

Contact Utah Airguns and ask: https://utahairguns.com/contact-us/

Utah Airguns
953 S. State Street
Orem, UT 84097
(385) 685-5951

Shop Hours (MST)
M - F: 10 AM - 6 PM
Sat: 9 AM - 4 PM

They have the mark 3 barrels and would probably know where to get mark 1 barrels:

If you do not have a tester, as there are no gauge for regulated pressure on the vulcan 3 you are playing a guessing game.

I run the factory regulator, and had the understanding that Huma regulators would have a gauge on their regulators to somehow ballpark it CUZ i dont think you will be able to 100 % rely on that piece of tape anyway.

So. I have absolutely no idea what kind of pressure i am shooting with in my Vulcan 3, but it is working just fine.


Those extra spacers i have no idea what they are for, in mine you just use the big one.

TerryE1 said:

I tried out the Triton Starstrike from Amazon this past Monday. The price was good so I took a punt. It was hideous. IR light wouldn’t come on after installing a battery. It wouldn’t focus properly, and trying to adjust the reticle with the control buttons in any direction did not work. The text in the viewfinder was unreadable without my reading glasses. I packed it back up and returned it on Tuesday. As always, YMMV…

Click to expand...

My starstrike works flawlessly. Focuses sharp. You might have missed a step with the reticle press OK until it turns black. then it will move. The only thing I dont like about it is that it doesnt REZERO to center after Adjustment. My reticle is low and to the right. So I'm trying to pair it up with a short scope and delete the reticle.

I personally like the smaller 3l scba tanks for ease of transport and fast filling.

Thank you both for all your inputs to the issue I had. Sorry I haven't responded to these sooner due to family matters that side lined me for awhile. I had received a response form tech support at AoA which indicated the black shrink tubed wire goes to black wire on the other connector. If done the other way it would not hurt the electronics, and it just would not read the data stored in the processor.
I did review all the videos per your suggestions, countless times, and felt very confident that I would not screw anything up. The most important thing I gathered from the video was to write everything down before attempting to modify any of the data. I am glad I did because my confidence of not screwing anything up was shattered, and I succeeded in erasing everything, I mean everything. Once I settled down, I was able to restore everything, and then adjusted what I needed to in order to reduce the FPE to 20 ft lbs. Again thank you both for taking the time to respond.
Bill

looking for a scope for my Beeman RX, the

Clearidge RM Ultra 3x9 Mil Dot​

450mm Origenal CZ 4.5mm barrel for Kalibrgun Cricket
with pin probe & 2 magazines.
$300

I'm looking around for an aftermarket marauder hammer. Pm me and let me know what you have. Thanks.

KWK said:

Is it there?
"Beeman, who recognized the historical significance of the air rifle he now had on his hands, donated the weapon to the permanent collection of the U.S. Army War College in Carlisle, Pennsylvania. The Lewis and Clark air rifle, which had the potential to be deadly, was actually a peaceful instrument essential in the opening of the American West."

Click to expand...

I called the museum in Carlisle and one of their staff said the Lewis and Clark girandoni is not in Carlisle. He suspected it might be in Ft Belvoir but I would need to contact the DC head office to find out more.

WOW! Very nice image quality!!!

Western Rattler .30 & scope.

This listing has been renewed

This listing has been renewed

This listing has been renewed

QD_Fox said:

Hey Tankman! Good to hear from you. I’m glad you’re enjoying the magazines. Always here to help if you need extras in the future. Let me know !

Click to expand...

Yes I was just about to message you definitely am ready for some more ilm message you here shortly thanks brother!!

DonEnzone said:

Will do! I can dissassemble GK1 pretty much entirely, but fiddling with the barrel has been the only thing I didn't want to mess up haha.
Perhaps it's time to finally give it a try. Thanks!

Click to expand...

When I first dissasembled I found out that the two alignment screws had gone loose, out of the four that hold the barrel assembly in place, so it pays to at least check, occasionally.
The easiest way to realign is to use a very tight fitting slug, half inserted in the barrel; I used altaros smooth 6.46, which has the added advantage of having a connical butt.

Rick Housel said:

Ich versuche, Ratschläge zu bekommen. Ich versuche, mit meinem Benjamin Bulldog ein schweres Geschoss für die Hirschjagd zu bekommen. Ich möchte ein 142-Grain-Geschoss abfeuern, aber wenn ich über 125 schlage, springt das Geschoss ungefähr 6 Zoll zu weit, als dass ich es mit der Zielfernrohreinstellung zurückbringen könnte. Hat jemand einen Rat? Der Typ auf dem Schießstand des Luftgewehrschießstandes, auf dem ich schieße, meint, dass die Drehung meines Laufs vielleicht nicht schnell genug ist, um das Geschoss zu stabilisieren. Irgendwelche Gedanken dazu? Wenn ich mir die Waffe auf YouTube-Videos ansehe, scheint sie problemlos 145-Grain-Geschosse abzufeuern.

Click to expand...

Only Benjamin Nosler Xtreme ...

Cloud9AG said:

Yes they are all glued together. If a shooter desires a shorter barrel for some reason, I recommend that they contact Martin Rutterford at Airguns USA to order that custom barrel and gun configuration. Once again, my FT pistol will shoot one ragged hole at 25yds and .175" CTC at 35yds, so I see no need to alter anything.

Click to expand...

I'm sorry I guess I misunderstood that it was too long for your competition and I thought that was the only reason why you needed it shorter and I thought above that you couldn't get what you needed to compete, so I was just trying to help you figure out a way to get what you needed..
if it is ok for your competition then there's absolutely no reason to change it.
Mark