So I know it’s been awhile on this post but I wanted to provide an answer. I sent it Hajimoto productions they gassed it and it sat for 3 days no pressure loss. When they went to degass the rifle wouldn’t degass so they degassed another way and checked the gas hole and found a 2-32 piece of o ring had been sent down the line and wedged blocking off the air.
I want to thank everyone who tried to help me get my rifle back up and running again and Hajimoto productions for their fast response and great explanation of the problem.

I bought the Custom Target ones - they are exactly what I ordered and expected.
I did not find them easy to use in my FT set up, but as my set up has changed over time I may have to dig them out and try again.

https://www.snappytargets.co.uk/product-category/neoprene-pellet-savers

Just found these - I've asked if he ships outside the UK - so far no response

It was perched. I think I was a snack, lol.

This listing has been renewed

greginsc said:

Hello all - just found this site while looking for used air-rifles. Have to admit I don't have much to share but can't use the PM function of this site w/o ten posts so...here is #1. I have the run o the mill Gamo I picked up from Tractor Supply for the backyard pests and a Notos on back order from Pyramid. That's about all -

Click to expand...

welcome

Dates announced.

woogie_man said:

What were you looking for? I am sure there are other people out there that will help you out.

Click to expand...

I decided to buy a brand new Avenge X in 25 cal. I was about to buy a older version.

Just wanted to share some information that I saw.

Thanks
Mark

This listing has been renewed

This listing has been renewed

ah... good to know, because I'll be putting a ton of 45 and 556 downrange on them as well as airguns. Guess I'll stick to cardboard.

This listing has been renewed

This listing has been renewed

This listing has been renewed

SELLING TOTAL OF 4 AIRFORCE CONDOR HAMMER WEIGHTS ONE IS STOCK OTHER 3 FROM PCP TUNES
THE WEIGHTS ARE 66 GRAMS , 82 GRAMS 88 GRAMS 10 GRAMS SOLD as a set
$80 SHIPPED Paypal F&F

This listing has been renewed

I'll see your revision and raise you a revision.
For the AW/DW tuning, I've started doing it backwards. I find a tune I like using the advanced settings, then I create a new factory table with the tuner for that barrel and pellet weight and plug in those settings. For example, for shooting JSB 13.43 from a 17" barrel I added a row for 120 reg pressure, 2825 pulse and 75.5 volt for 815 fps. Then I added the row that has my actual tune: 120 reg, 2850 pulse, 77 volt for 820 fps. Then when I shoot I use the factory setting that I created and it's good to go.
I shot for about 6 months just using the advanced setting and it was fine, but with the spring weather and some out of state shoots coming up I think the custom factory tune is the way to go.

This listing has been renewed

FX stackable moderator .22 caliber. 1/2 x 20 thread. Muzzle exit is .290 so you may be able to use it on a .25 cal, depending on your shroud alignment. This is the first generation stackable moderator. Barrel end, muzzle end and four mid sections. Each section is a baffle, unlike the tube moderator offered now. Can be tailored to your taste depending on the length/sound you are looking for. Excellent condition. Same diameter as your typical FX shroud. See pictures of the WC MKIII below for reference.
$65 TYD CONUS. PP FF or USPS MO.
Thanks for lookin!

I have a Titan 5-25×56 FFP APR-MOA. It's in like new condition, has a small blemish on the top turret, Pictured. Does not effect the scope. Rings not included. Asking 550 shipped TYD. I'm selling the gun it was on and not going to be using it, so making room for other stuff. I have excellent feedback, so deal with confidence. Open to offers.

We're going to hold our third airgun shoot at Atglen on Sunday, March 3rd from 10am until 1pm (or whenever we feel like leaving really). We will be shooting 25m bench targets and will be split into two classes, springer and PCP. Feel free to shoot both as we will have plenty of time to run multiple relays. The kitchen will be open at the time of the match and we will also have pellets there for sale if anyone needs to stock up some. On top of that there will be prizes for winners of both classes so bring your A game!

Caliber recommendations are .177 - .22 and we'd prefer that the guns be sub 20fpe. If you have your own adjustable chair we strongly encourage you to bring it and use it. If you have any questions or concerns feel free to reach out to me.

Cost: $10.00 gets you as many rounds as we can fit in

Address:
Atglen Sportsmans Club
82 Creek Rd, Christiana, PA 17509

As a final note, the benches have been updated since our first round. The wall has been reinforced which has resulted in a much steadier shooting position!

This listing has been renewed

It's a nice gun but the plenum of the stock gun is quite small. Like 10 or maybe 15ccs. For a 177 it is fine. For a 22 it isn't bad. But the additional plenum really helped my 25. I might put one on my 22. I think the South African one is the biggest and it is only about 35ccs. It does make the gun a little longer, however.

My setup got some updates.
Built cradle and compressor is in it with springs - zero vibration outside of the cradle and it runs way quieter than before.
Added water/oil separator.
For cooling I'm running straight from tap (from my private well, +4 degrees Celsius) cold water. Outgoing cooling water goes down from the drain.

Thanks fellas. Sounds like there is no need to tinker then, thanks for saving me time chasing my own tail. That's why I asked. Wondering if there were any gains in accuracy to be had aside from more energy and more air usage if I upped the FPS.