@modos Could you please move this post in the right section? GK1 is a pistol

my new backpacker

I have a very nice FX Dreamline 300cc bottle gun. It is currently set up for off hand shooting. Barrel is 500mm and the .177 cal. barrel and the probe are brand new. Currently shooting 10.5 gr at 935fps and 15.74gr at 835fps with a 125bar reg setting. Scope and mount not included. Stock is a UTG Pro and is adjustable for length of pull. No leaks, includes one magazine. This setup is $895.00 shipped PayPal friends and family. Lower 48 shipping only.

So, here is the second deal. I also have a Saber Tactical bottle chassis for the gun. It includes the chassis and receiver block needed to convert the airgun over to a bottle chassis gun. If the seller would like the Airgun with this chassis also I would sell it all for $1245.00 shipped PayPal friends and family. Scope and mount not included. ( Chassis sells for $575.00 at online retailers.). It would include everything for the off hand setup and the bottle chassis so you could set the gun up either way. Lower 48 shipping only.

The gun could do double duty as a pesting setup and possibly a Field Target gun.

I am including a photo of a Dreamline chassis gun with a shorter barrel just so the buyer can see the setup. This is for reference only the chassis is all that is included with the second deal.

Yeah I talked to Travis on the phone. I'm waiting for his phone call when they get the western air gun sidewinders back in stock.

In theory for a springer, it is entirely determined on 2 factors:

The ratio of thermal expansion between the piston chamber and piston seal.

And

The thermal performance of any lubricant in the system.

With two such wild card factors, no hard and fast rule exists. I would say most springers should not be shot in the exteme cold (20f or lower) unless special lubricants are used.

For a pumper this all goes out the window. They are immune to such issues by design. Unless it is so cold or hot that the o-rings in the piston fail.

I have a Bullshark in .22 for sale. Currently tuned for 18 grain FX's @ 880fps for around 55 shots. Has a external plenum installed from Xtreme airguns, the barrel has been polished. Rifle is pretty much a tack driver out to 75 yards I have not shot it any further then that.

Asking $400 shipped

Will come with the following

2 carm mags 2 stock mags 1 SS flip down mag

Buck rail moderator

Bipod adapter

Xtreme Airguns plenum (installed)

Fill probe

Selling my Huben GK1 22 cal pistol I just do not shoot it enough to justify keeping it
this GK1 is in perfect shape no marks or scratches and comes with all its original stuff
plus a 3D printed plate for mounting a red dot if you want. This is number 65 a early one.

PayPal is preferred for the payment and selling for 1,150 dollars shipped free with USPS Priority CONUS

if you have questions or need better pictures please send me a PM. No trades at this time. Thanks

P15 in .177 for sale, has custom carbon shroud this thing is whisper quite. Comes with a external plenum that hasn't been installed yet. Currently tuned for 10 grain knockouts at just under 1000fps. Shoots pellets or slugs equally well.

Asking $350 shipped

3 carm mags, 1 stock mag, 1 SS tray

External plenum (not installed)

Picatinny mag holders

Bi- athlon cocking lever.

Extended adjustable pad

Bipod adapter

gendoc said:

yep, this evening will be awesome eats here for me and my grandson.
he took these 2 males this morning with his newly aquired (used) .177 flashpup using
12.5gr nsa slugs. both shots were around 28yrds he was resting against a cypress tree.
the girls they were chasing will be back soon, so maybe he will get a couple more before the rain comes.

View attachment 431631

Click to expand...

Very nice of you to introduce your grandson to the world of airguns. So glad that you shared your hunt with us.

With them expanding so readily do you ever see failure to penetrate on longer shots?

Because non-airgun related content belongs in the SOCIAL FEED!

This listing has been renewed

Ok thanks Dave and Solo. Thinking about giving a sling a try, can’t hurt with my lackluster offhand and kneeling performance! I have been looking at a M1 Garand reproduction cotton sling that looks like it cinches up easily to use in the hasty position.

I have a AV. 74 cu. ft. wingman manufactured in 2021 bought from a vendor ( new old stock ). As far as the label it's hard to read as I have webbing over it. The tank is smooth as glass and the same as my great white tank. The valve sucks, hard to open and close btw. I know its not a 60 or 45 but thought I'd throw it out there. Maybe ask a vendor that sells them. Edit: Further inspection tank is made in (KOREA)

I just sat and measured tins of 21 different pellets and slugs -

While the JSB Exact King Heavy MK II flys really well with my gun, it had the third worst spread of weights from lest to heaviest -

While stated as 33.95 gr, my tin ranged from 33.80-34.75 gr - A range of 0.95 gr

The best measured slug was 0.04 for a whole tin and the worst was a spread of more than 2.00 gr. on a 30 gr slug

I'm interested in how narrow a range you would batch for 100 yards

I don't know anything about resizing and am guessing its maybe more challenging with slugs?

This listing has been renewed

Looking for one to tinker with. Prefer the gen 2 for the adjustable trigger. If you have one you wanna sell, or a good link to one that isn't over priced, let me know.

I am wondering if there is anywhere or anyone in South East TX/South West LA that has a range or is an airgunner? Looking for some place to shoot with some good people who enjoy the sport as well. Thanks in advance!!

My Labradar also doesn't reliably track past 75 yds, but that is a known issue for bullets of .22 cal. and under. Sometimes it tracks out to 100 yds. Larger bullets do fine out to 100 yds. I have not tried it with my PCP rifle yet. But even if it only tracks out to 75 yds., that's still enough to calculate BC if you wish to do so. I bought my labradar primarily for use with center-fire cartridges anyways.

I recently came into possession of a Jager EVO .22 PCP. it is missing the fill adapter and the pellet tray/loading sled.

I have a friend who may be able to make a new pellet tray as he has a CNC, but the main issue is the fill adapter.

I assume that since this is an orphan design that the possibility of a different make or model fitting is non-existent.

This particular model is set up with a left handed bolt which is what interested me.

My only other air rifles are Walther LG 400 in .177 and a Sheridan Blue Streak in .20.

Is there an engineering diagram that I can take to a machinist and have a fill adapter fabricated?

Priced for a very quick sale!

Today Im selling my .177 Veteran along with everything you see on the rifle! It is an immaculate Bullpup! Perhaps one of my top 3 most accurate rifles I have ever owned and that is saying alot! It shoots hole-in-hole accuracy as you would expect from a Taipan. It is deadly quiet without the Tatsu LDC, but with the included Tatsu, all you hear is a "click." It comes with 4 mags, the mag holder, the fill port wth the holder, the power adjuster, the Hawk Airmax 8-32x50SF scope with sunshade and leveler, and the Leofoto 223 with the upgraded 52" wheel. (If I can find the smaller Leofoto wheel the single shot tray, and any other accessory, they will be included). The scope does have a scratch on it as you can see in the pics, but it works flawlessly.

You can feel safe with this purchase because I have years of being a member here and pages of excellent reviews here on AGN and GTA! I accept Paypal F&F, Venmo, and U.S.P.O Money Order.

$1300 Shipped Firm! Thank you for looking!

LMFAO!! This is hilarious this is still going. WTH ?? I can definitely back up ray in the opinion that given the distances he is shooting the avenger platform is completely capable of being just as accurate as any gun made today. Who cares ?? Again those spending 1 2 or 3 thousand bucks on a gun I hope that accuracy leaps and bounds isn’t the driving factor as you are going to be disappointed. That isn’t why (I think anyway) most of us spend that kind of coin on a gun. I have no idea why this has gone on and on. It’s as simple as my explanation

ba49 said:

I'm very seriously thinking of buying one in .22cal. but was wondering if it is lefty friendy? I'm not real picky about shooting a right handed gun lefty but is anything like the magazine or cocking handle in the way?

Click to expand...

yes it is very lefty friendly except for the safety and the cocking handle is right only but as a lefty I prefer mine on the right

You will need the now re-named "slug" liner for javelins.

I was shooting 68gr javelins but recent testing ive done out to 260 yards has made me switch over to Zans. Zans have a much more consistent BC out my 700mm FX Dynamic which shows up bigly at distances over 120 yards.

The packaging alone tells a huge story on how Patriot and Zan handle manufacturing and operational precision. Zans like Altaros slugs and FX hybrids come individually contained. Javelins come in a cylindrical container where they all bang around. I'm certain that packaging alone will have a significant impact to the consistency of your shots.

IMO element optics and javelins are over hyped and under deliver.