I believe that my Excel spreadsheet includes that O-Ring information.
It's on tab labeled "Schem X x Pg 4", far lower right corner of the opening spreadsheet. There are a total of 13 Tabs along the bottom, each with a different parts section that is shown on Tab "Schem Pg 1".
Some folks can't open the spreadsheet for some reason, perhaps because it's Microsoft Excel?

Mike

View attachment FX Impact MK2 and MK3 O-Rings 2022-03-06.xlsx

Try 120bar and 150bar with stock internals. I find anything more becomes loud and 980fps is good enough.

Some arca rails have MLok slots and Mlok to pick adapters are plentiful and cheap.

PCP_Addict said:

that’s awesome!!

Click to expand...

Yeah I'm stoked to say the least

Selling my excellent condition Crosman 1701P to fund other airgun things. She’s all stock except for buck rail grips and a painted front sight. I’ll include the Hawke red dot . She holds air and she shoots well. Very consistent. $375 obo please be fair in your obo. I’ll accept Zelle, PayPal f&f. PM me

Swapped my gun back to a bottle setup and no longer need this stock. If I keep it, I will end up building ANOTHER gun lol.

No damage, but could use a refinish.


$120 shipped CONUS only
PayPal F&F or CASHAPP


PM if interested.

steve-l said:

I'm sure in some cases you may be correct, but I assure you there are far too many instances having been reported by too many very experienced shooters and engineers to disregard this very real issue. I was going to purchase an M3 last year and changed my mind because FX is NOT dealing with this issue.

Click to expand...

Agree. You can make the problem worse by assembling an Impact on a bind but what about the Crown, Maverick, Wildcat and Dreamline guys? My Dreamtac Compact put every Impact I ever owned to shame when it came to POI problems. Not accuracy problems, it was accurate but my scope got a workout. The gun is simple, not a bunch of pressurized sections fighting with each other. I wasn’t on hallucinogens. Never hamfisted anything on the gun. That thing never shot in the same spot day to day. Machined a solid barrel for it, haven’t touched the scope since. There is something going on. If customers demand modular guns with a bunch of cheap options to switch calibers and projectiles, this just might be a side effect.

So the next step is like bigHUN talked about. It’s time to really dot your I’s and cross your T’s when you mess with the gun. Especially if you’re not a that’s good enough kind of guy.

Looks like the umarex readyair………which was a complete and total POS for me.

Another teaser video of the DRS.

Thank you all for the replies.

delooper said:

If I wanted to shoot something big and heavy but subsonic, I've got a .44 mag lever gun with 44spl ammo that works perfectly. Simpler and more reliable than any airgun I know. IMO airguns shine for pesting and for those that really like to get a tonne of practice/range shooting in.

Click to expand...

And those that can't own those guns you're taking about and those that love airguns and is our hobby and that love to hunt with air guns and a ton of other people that think the exact opposite of you. You damn narcissist.

Hello forums
i want buy new barrel for my L2 .22
And saw new type of barrel
Its LW polygon from team wolfiek
Did anyone try this barrel?
.
And what best barrel for slug
1- alfa 450mm
2- fx haevy superior liner 500mm
3- or this LW polygon 450mm

Some minutes ago I made some shooting with my Sidewinder .25.
I have confirmed confirmed that first shot after not having shooting the rifle and filling it, SIDEWINDER HIT WHERE YOU AIM AT.

Thos info is important for hunting purposes.

Just get a Huben thats what they are trying to copy

Today I am giving away my used Huma-Air FX Wildcat Reg Tester, and a used FX Wildcat MKI regulator set to 170 Bar, and a Wildcat MKI air tube end cap for the price of shipping. You will have to supply your own air gauge for the reg tester, which requires a gauge with 1/8 BSP threads. I am charging $20.00 for the shipping on these items that I no longer have a use for, which includes anywhere in the CONUS. I will accept payment for shipping by PayPal Friends/ Family. Pictured below are the three items I am giving away for the price of shipping.
All the best, Chuck Peffley

Today I am selling my used FX Impact .35 cal. magazines. The clear plastic covers have been modified so that when shooting slugs you can adjust your pin probe so that it protrudes into the mag well by 2mm, which allows the pin probe to push your slugs 2mm farther into the brass barrel inlet to a consistent depth. These magazines retail for approximately $70.00 each. I am marking them down about 30% so my selling price for them is $50.00 each or $200.00 for all four of them, which includes free shipping anywhere in the CONUS. I will accept payment by PayPal Friends/ Family.
All the best, Chuck Peffley

Today I am selling my used PRS Competition Butt Pad for FX Impact Rifles...this is the version without monopod. It was just purchased a couple months ago and is in fine condition, so if you were interested in getting one of these you can get this one at a discounted price. Retail on this item is approximately $150.00 but I am marking it down 20% so my selling price for it is $120.00, which includes free shipping anywhere in the CONUS. I will accept payment by PayPal Friends/ Family.
All the best, Chuck Peffley

Williams ARH124 stamped rear sight for FWB dovetail.

Today I am selling my used Air Marksman Backbone Scope Rail (short version) - the screws for it are also included. It was just purchased a couple months ago and is in fine condition, so if you were interested in getting one of these you can get this one at a discounted price. Retail on this item is approximately $260.00 but I am marking it down 20% so my selling price for it is $208.00, which includes free shipping anywhere in the CONUS. I will accept payment by PayPal Friends/ Family.
All the best, Chuck Peffley

I am in the process of doing some "spring cleaning" and am brooming out these FX Impact barrel liners, barrel tubes, & carbon fiber tube...no charge you just pay for shipping. I am charging $20.00 to cover shipping costs anywhere in the CONUS, otherwise these items are free to the first person to respond to this post. I will accept payment for shipping via PayPal Friends/Family.
All the best, Chuck

Just got in a replacement AEA compressor.
1st one sht the bed. Awesome its a 110v version and i no longer need the converter box. Also i noticed its a lot quieter and more balanced, doesnt jump around as much.
It also came with a bag of orings and other seals, quite a few of each actually. Anyone know where they go? Cant find any info on them.

I'm looking for an end cap for Kral air tube. This is the one that protects the filling port. Please let me know if you have some Kral parts lying around. It's also possible that other models / brands would work too, but I have not tried yet. Thank you AGN!

For less money the FX adjustable rings and also Eagle vision adjustable rings are good. The cheaper ones work but put
more stress on scope tube...

This listing has been renewed

BobS said:

Looks like these are from Aug 2022 ;-)

Click to expand...

Bob no pellet 2023 Raton score improvements. Records stand until replaced by better score