Years ago I had the original shoebox and what a pain it was to run and maintain but at that time it was affordable and with no scuba shop around it was best option, now after getting back into PCP guns i to went with a CX-CS4 and am really impressed so far only put 7 hrs on it keeping fingers crossed !!

Hi, I have a slightly used DonnyFL FX Moderator .22/.25 for sale. It works great and in original box. Selling it as i have moved to DonnyFL RYU Moderator. I am asking $70 Shipped. I will accept Paypal, Venmo or any other convenient method. Will ship ASAP with tracking info. Please feel free to ask if you have any questions.

.22 AEA Challenger Pro regulated PCP rifle in excellent condition, and recently resealed by Fox Air Power. I’ve detuned this very powerful rifle to return a high shot count with 18.1 grain JSB pellets at 33 foot pounds, and added a trigger-sear adjusting screw to give it an excellent trigger action. Will also come with a high-power hammer spring to return the power to factory specs. $450 From my notes- 18.1 grain JSB, 15 shot string- Low= 896, Hi= 911, ES= 15, SD= 4, Average= 901 FPS/32.7 FP



Add $75 for 4-12X Bushnell Custom Gold scope pictured above.



Feel free to call, text, or PM me for more information.

Ron 254-253-1239 (noon till midnight, CST)

5 tins of vortex strike pellets (JSB) 24.70 grain .25 caliber. Sealed in Styrofoam and double boxed TYD. $50 shipped

beerthief said:

From what i have read guided Iggy hunts in Fl . are $$$ but they supply the gun and everything , so you do not have to FLY with a gun and they know the gun is up to the hunt .

Click to expand...

I was quoted $375.00 for 4 people, for the day. They supply everything.

This listing has been renewed

Snooker table baize is a felt with high wool content.
So sound absorption is better than cheap nylon type felt.
My quietest mod has curlers and this type of felt
Just my opinion

i measured the skirts of the 18.1 gr jts pellets that fit fine in the gk1 .22 ive got and they are .223 in size..so hopefully the .223 Nielsons will run well in it, course i know itll be alot more surface area to contend with..but the Airgun Tactical site explicitly says .223/.224 sized slugs and i chatted with someone there that said .223 Nielsons will be fine..

chas1969 said:

Need barrels! No 28” barrels. Wt falcons!

Click to expand...

Soooonnnn!

This listing has been renewed

Randy;

Thanks for looking in. There are some parts vendors who can supply some internal rebuild parts, I suspect it would be hard for major unit components to be found in view of its age. Rick Willnecker @ Precision Pellet would be a starting point .

Garey

Huben K1 .22 2022 or 2023 in like new condition, please PM me.

PRUSA XL 5 look SWEET.

Price,,,,,, not so much

Also Danes do NOT have the dirt cheap power most other nations got.
Which is kind of ironic with all the " free " wind we are harvesting here.

i had a try with unchocked polygonal and choked polygonal on red wolf and 2 alpha wolfs (redwolf shoots 16gr slugs great ,alphas hate slugs) and a choked 12groove 600mm traditional riffling on my raw hm1000 . My Raw is a bit more accurate at 905 fps with 13gr ZAN . LW makes a traditional 12 groove 1:16 unchoked for the .177 i would choose that one and give it a nice polish

This listing has been renewed

I did consider that line of compressors, just trying to stay under $500. My other hobby is photography, but my job is convincing the wife I need more toys. I’ll have to approach this as a money saving investment .

Thanks for the recommendation.

Hope this is ok to post here. It may be better suited in the classifieds, but since I do not have the guns to 'sell' I chose to post here. I have a buddy who was into airguns for a bit. Ended up getting a Matador long and a Leyla, big tank, fittings for the tank, etc.
He is now looking to get out of airguns and reached out to me.

He's not very computer savvy and is not a member of any forums. I have shot the guns and can vouch they are real and were working perfectly a few years ago last I shot them, but that's really all I can say about them. I dont even recall what calibers they were, but likely .22 or .25.

In any case, I dont need them but told him I'd see if I knew of anyone who may be interested. If so, hit me up and I can send his email address your way.

Cleaning out closet. Used af bottle. Valve need rebuild. 2 end caps. Safety wire. What you see is what you get. Need jsb .25 33.9. Open to offers. Deal by email. [email protected].

Klaas said:

I never did that. How ?

Click to expand...

You Tube is your friend IT is easy to build , piece of glass (cheap mirror ) . tape to make a L shape 90degrees on the glass . usually 6 or 8 inches a side . tilt the glass a small amount. mark a start point to place the head of the pellet , let the pellet roll to a place on the bottom tape and mark that . (you will have several "landing" marks . just pick out the pellets that land in the same place to shoot a target . this assures the all the pellets FOR THAT TARGET are the same head and skirt size . It does not matter what that size is ,just that all pellets are the same .
Some people like this (ME ) and some people say no . edit layer the tape to a thickness that will stop a rolled pellet

Vortex 6-24x50 MRAD reticle FFP scope, briefly mounted on a rifle but not fielded, like new. Includes sunshade, bikini cover, original box & paperwork.

$295 Shipped to lower 48, Paypal F&F (or +3.5%), Zelle, Cashapp. Not interested in trades. Positive feedback on AGN and on ebay.

NEVER MIND< GOT MY OLD ONE UP AND RUNNING!!!

Need to replace the ink pad roller in my T-8 Ballistic printer. Have not been able to find one, it takes a IR-30 and I I find is IR-40.
You have a used one that is collecting dust and the ink pad is good I am interested in purchasing.\Message me please and we will do a deal, Ray LifeisGood

This listing has been renewed

To the op, the liner crush nut can rotate when moderator are screwed on and off, also the design of the liner system is not as rigid as a standard barrel so heavier mods will drag the barrel down more and all weight of mods will alter the harmonics..the longer the barrel and higher the power the worse the effect becomes.


A simple test for moderator concentricity is to sick a piece of masking tape over the moderator end cap and take a shot, look to see if the pellet exit hole is dead centre to the moderator bore.

Bb

cavedweller said:

the subject comes up from time to time... personally i thing stressing the neck of an HP vessel is bad but many many do this. I think it is always best to perch on a stock.

Click to expand...

I asked FX about resting on the bottle or using the bottle as a bipod mount years ago and they said no problem.

BlackICE said:

I don't disagree about the energy transfer, but the examples given just show how important shot placement is more than anything else for small diameter sub-sonic projectiles. The 1st video with the .357 hit a little high. The 2nd video didn't. But neither shot is going to be DRT 100% of the time. The only time that happens is if you hit the brain, brain step or spinal column near the brain. Even with brain shots I've seen coons do the death dance, moving over a minute and a few feet from where the shot occured.

Click to expand...

Nomadic Pirate 66 said:

That comparison is total bollocks.

High strung .25 compared to anemic .30

the only way a comparison of the kind is worth watching is if you shoot the .25 at the same fps as the .30

Told him when he fist came out with it but he completely ignored and hide away without awknowleging the huge shortcomings of this useless test.

Click to expand...

I also said the comparison was trash, and we agreed to disagree.