That's a good find Works well on a Texan I'd imagine...

Got these from Amazon

Round holders

You definitely need the tensioner on the 800mm barrel in .35 Cal. especially if you are going to increase the power. The Power Block will buy you a little bit, but its gain can be made up with a higher reg pressure unless you are going for a very high velocity then the PB would pay off. I have both on mine and am pushing the 68 gr. Hybrids at 1025 fps with the Huma 1308 hammer spring, tungsten hammer weight and 170 bar on the reg. I prefer the Bullet Central tensioner over the FX one. Its available with a shroud also.

I have two gently used .177 magazines for a Taipan Veteran. These are $45 each when purchased new. They are for saleas a pair for $70 OBO to your door within CONUS. Paypal Friends and Family preferred. Thanks for looking.

View attachment F1AFAAFC-5153-41CC-AEB7-ED76057B7671_1_201_a.heic

View attachment 156A2E82-385E-4454-9DF4-7005A72C3206_1_201_a.heic

Give me a shout!!! We can connect soon if you'd like.

EmptyTin_Tim said:

Wonder if that means they're softer than normal redesigns so they can expand better? Idk my Crosman Premier are also shiny but are hard. Tin vs lead vs other making up composition

Click to expand...

I don’t know what it means. I mean these things are really shiny. Almost aluminum foil type shiny.

AirShootist said:

Thanks for taking the time to explain that. Pretty neat, and I learned something since I never owned one myself. There were pretty expensive when they first released (IIRC) and I was just a college kid, so hand pumping was the way for me! I remember never letting others shoot my Talon SS because of all the hand pumping I'd have to do afterwards... lol

Click to expand...

Hand Pumping?
Was it a true hand pump, or just a pump operated by hand?
There is a big difference.
The true hand pump was invented in 1649 by a fellow named Otto in a small village just south of .............
Ahhh nevermind!
Thanks for the interesting video!

Matt Fletcher said:

That I didn’t actually test as i wouldn’t ever use it unmoderated, I’ll try to get some levels with the mod off

Click to expand...

To measure the effectiveness of the moderator is necessary know the before and after.

This listing has been renewed

Like new mostly stored. Fx impact .35 mk2 800 mm. $1400 shipped with

Fx hard case
UTG adjustable bipod
Saber tactical rail
2 magazines.

Mycapt65 said:

I believe they all came with it. My 1992ish R1 and a virgin 1982/83 R1 I worked on had liners. Unless you got your gun new, it was removed. They were initially installed to help support the early style cocking shoe. They still kept them after the development of the new style cocking shoe in about 2012. They still function as grease shield and take up space around the spring which arguably helps reduce spring buzz. It's quite common for the liner to get damaged beyond use when a spring breaks. The 35s, 80s and 95 family guns use them. Here's an 80 liner with a new and old style cocking shoe. I've taken most of them out of the guns I've worked on.

View attachment 445802

Click to expand...

Wow thanks for a great explanation. This is a great community.

Purchased this used from AoA about a year ago. Originally came with the long, 24.5" barrel. I bought a 410 mm barrel shortly after purchasing and added a Ratworks aluminum air cylinder which doubled the shot count and reduced the weight. Great shooting airgun. Super quite. Last shot string on 3/3/24: 756 average fps with JSB or FX 15.9, 74 shots (6 magazines+), SD 3.6. I've drilled a small hole to allow access to the hammer spring without removing the stock as shown in the pictures. Stock has quite a few scratches on it, but the metal is in good condition except for some marks on the end caps from when I replaced the air cylinder. Comes with everything shown in the pictures including the original barrel and six magazines. Two metal original Weihrauch mags and four from Alternative Mag, which I like much better. Scope not included
Priced at $850 shipped PP F&F or buyer pays fee. No trades

i'll tell you i have never even seen one before i started looking and that fell it to my lap
i did a Google search on the part number and that it is all i found
i would go to Creedmoor sports and ask if they can order one and i believe Buinger will ship to the states but the shipping will take all the fun out of
https://www.creedmoorsports.com/category/CENTRA

https://shop.mec-shot.com/iris-ringkorn-vario-square.html

https://www.edinkillie.co.uk/centra/centra-vario-square-foresight-iris-p-1642.html

what i can tell is the chances of finding one in the states is very low they are advertised in Europe and mainly Germany and i don't know how well Centra is supported in the states
here is another company you could call

https://www.nordicmarksman.com/Centra-2.html

for me it looks a little odd that you would have so much field of view blocked but it is opinion with no firsthand knowledge of the product
they are not cheap

about all i can do for you

https://www.google.com/search?q=Iri...qMGoxNagCALACAA&sourceid=chrome&ie=UTF-8#ip=1

Jay308 said:

Why does this rifle have a powder burner ”magazine”, doesn’t seem like a good idea. Looks even worse with the MDT chassis, it’s not going to be a trainer for PRS PB because of no recoil, balance etc…

Click to expand...

Well it’s really not much less recoil that of a 22lr and that’s probably what they assume you’re going to be buying this to practice with for but hey it could just be a marketing strategy to get more powder burners into air rifles..? Hey buy this you won’t disturb your neighbor and you could shoot gobs of lead for way cheaper then your over priced 22lr ammo who knows..

If I were getting back into casting, I'd just buy ingots of Lyman 2 alloy. I think it's around $20 for 5 pounds. But that would be a last resort. There are risks in working with molten lead, and I'm happy to buy bullets and pellets.

I modified Bravos 3D GK1 Grip to fit my big hand. Removed the bottom little finger tab and put this piece of aluminum on the bottom, adding the perfect amount of length for me. I left the front of this addition extended some for my preference. I put a couple of screws and epoxied. I still might slip a rubber gripper over it, but It ain't too bad now. I also drilled and tapped a 10-32 hole for a sling stud. I like to have a sling stud and ring for hanging my pistols while in a hunting blind or on the wall of my shack.

This listing has been renewed

This listing has been renewed

[SPF] HUGGETT Astille Moderator and 2 extension modules. 22 cal, 1/2x20.
Half price of retail at only $150 shipped
PayPal FF please or +4%

new tank 8 inchs long 2 inchs rounds or 50mm o/d has m 18 v 1.5 threads brand new its smae size as one in pict

177 Prophet compact

This is my last air rifle, this is painful, but I raised my right hand and I will fulfill my obligation.
It is a custom cerakoted red and grey, comes with 3 magazines, 4-16 Arken scope and a white eyler roller case. It shoots stupid accurate with Zan 13 grainers.

I am asking $900 shipped

Sorry no trades at this time.

dont sweat it

you dont need to "fill in all the blanks" to use the forum.....

Thank you everyone for all the help and comments and forgive me for the late response but this last month i have been very busy and only this past couple of days i managed to find time to adress all this.

I reached out to krale concerning the problem i had and they promptly sent a return label so that they could troubleshoot/fix this but it unfortunately happens that the shipping options were not to my liking so i ended up cutting the barrel myself.

Being a semi-auto there is a piston that slides around the outer part of the barrel so i could not just simply chop off the end because most of the lenght is needed to actuate the mechanism.
At the very end there is a groove to place a circlip (not needed for function but as an extra safety)


I figured i could cut a cone with a very steep angle with tangent radius to ease off turbulence so that i could clear the damaged rifling but could still leave the outer part intact


Concentricity between rifling and outer diameter was good (0.020mm) at different depths past the damaged section. This one was not deforming the pellet but was throwing it out of alignment on some lands which would impose an exaggerated pitch angle at muzzle. Value i measured was 0.04mm on the most damaged groove in relation to the rest.


I took 2 groups at 35m before rework and 1 after. Pellets were HN 14.6gr field target trophy power at 695fps 21joule /15.5ft-lbs @55bar (needs a lighter hammer and different spring to work in semi at this low energy)




The velocity loss with the 6mm shorter barrel was 5fps at this pressure.

The bad part is i may have to test all the pellets out again.
The good part is i actually enjoy the run as much as the finish.

I feel tempted to inspect my other barrels after seeing these results just out of curiosity and learning purposes.

But before i do i may end up either polishing or reworking the other end.

Once again thank you guys for all the guides, knowledge and opinions. helped out a bunch to make me climb another step!

This listing has been renewed