Thank you

This is an early serial number (0000035 I believe) Skout EPOCH .30 cal. with both barrel lengths 25" and 35" (6 barrels in all) and an extra magazine. ( 2 total) I Also have a prototype Moderator adapter from donny FL before they where available to the public.
I pre-purchased this gun before it was available to the public from HPP. I have posted about this gun on this forum. Go review those posts. Simply put, I never used the gun. I don't even know if it is charged up. Scope not included I am not trading the rifle
Before you spend a large amount of cash on a new one contact me. $1500.00 /discuss pick-up or shipping.

post from 2/23
Scout Epoch Pictures of mine that I just received.
Shot string with JSB 44.5 gr. Diablo pellets 30 cal
HP Reg at 1500 psi Low Pressure at 150 psi
895, 895, 898, 898, 895, 895, 905, 905, 905, 905 fps.
It has a Bark that I must address and it being so different from all the others I have. I am going to take a few months (the entire summer and fall) and enjoy it and see what it is really like before saying to much to soon. I have all the support I may need if something isn't right at HPP. Thanks again Tom and Moose

Hunter

I'm getting out of the hobby and selling all my stuff. I'll be making a few threads over the next few weeks. Everything I have left is gently used in my backyard only shooting from a table and in excellent condition and what I kept out of the last of my (at once) large collection.

Prices are firm. No trades. PayPal Friends and Family or add 3%.

Selling 2 Atlas V8 bipods.

The one on the left is Atlas Model BT10 LW17 V8 (quick connect). Price is $200 shipped. It is $295 new.

The one on the right is Atlas Model BT10 V8 (picatinny). Price is $160 shipped. It is $230 new.

Links below for reference.

If you buy both, price is $330 shipped.

​

https://shop.accu-shot.com/shop/atlas-bipods-official-manufacturer/v8-atlas-bipods/bt10-lw17-v8-atlas-bipod-3/
https://shop.accu-shot.com/shop/atl...cturer/v8-atlas-bipods/bt10-v8-atlas-bipod-3/

USARB scores are posted.

steve W.

This listing has been renewed

rayt1953 said:

I’m thinking of doing the same thing and wasn’t sure myself

Click to expand...

The trigger blade worked, but it does put it pretty far to the back of the trigger guard.

Mike-K said:

Ken Hicks https://spaweapons.com/

Click to expand...

Cool. Thanks!

Spinach said:

Definitely less wind drift in my experience. [...]
It is a anomaly. [...]
Just to be polite, no you aren't getting my BC figures, go spend some money.

Click to expand...

Gary,

thanks for the explain.
"It is an anomaly."

➧ I'm NOT liking it.
➧ But I don't have to "like" anomalies. There just there, like the road sign telling me the bridge wanted to cross fell in the water....


The anomalies of the reported experiences in this thread — and the surprising data of another thread on muzzle energy loss with slugs — both lead me to the conclusion that I need to do MY OWN testing!!


Wait, Gary, you basically told me that in your last sentence...!

Matthias

drpietrzak said:

SG's and LP's mostly here.

Click to expand...

That was originaly an audio presentation recorded in 2001. I did all the tracks on a 4 track cassette recorder. Ten years later I coverted it to digital, and added video, so that I could share it.
Thanks for watching.

All parts are “like new” that came off my Impact M3’s. I never touched regulator adjusters and quite honestly they both only were only shot once or twice. Will fit FX Wildcat, Maverick, Crown and Dreamline as well. They look good as new with no dimples on top, scarring or scratches on the side of the delrin pistons. No leaks on either reg.

The FX Impact M3 block looks great and includes internal valve with 720 Power Plenum. This M3 block is only compatible with M3’s and not older models.

$65 per each regulator shipped or $110 for both.

$75 for FX Block with valve and plenum shipped.

PayPal FF preferred or buyer pays fees. Tracking will be provided. CONUS only.

Thanks for looking!

Rob

For Sale:
Crosman 2289 14” .22 Backpacker with Shoulder Stock.
This is a Bugout Kit to use yourself or give to a kid for when the SHTF.
Bought and never used. Do not have a kid to give to.
I am asking $120 shipped to your location ( USA only ) Paypal F&F
Please PM – Thank You, Robert

Occasionally I'll have a curious grey squirrel emerge from the wood line and come up to investigate the "thump...thump" sound they hear being produced from the big old log that is the backstop of my 60yd target when I'm shooting through paper. They'll climb right up on it to try and figure out what is going on. The sound seems to intrigue them for some reason. They do not fair as well as your birds.

This listing has been renewed

Solo1 said:

I’ve shot a regulated revere in hft its was bought as a backup to a red wolf i had to send back for repair. It was just as accurate as the red wolf but you needed to bbe a bit more careful shooting it cause its lighter than the red wolf also you need to top off to be safe before the end of a 60 shot match. You probably make it but i never push boundaries in a match

Click to expand...

I find my "regulated" Revere, still more air hungry than i would like... even with the reg set just right for my 10.3's at 880 fps. I make darn sure i top off after 5 lanes just to avoid forgetting and dropping below reg pressure.

GenXer said:

Very kind of you. This level of patience and diplomacy has proven to unobtainable for me.

Click to expand...

The kindness and patience of Biohazardman convinced me to stop lurking and join up, almost three years ago. I couldn't have been any greener, never got angry or short with my newbie questions, try to emulate that in his memory. WM

This listing has been renewed

Shot was 30 yds with my Crown MK II .177 tuned to 14 fpe using 10.3 gr. JSB pellets topped with a vortex pst gen2. Thanks for watching.

Great Info

MikeAndrews said:

When ordering scope caps do you order based on lens size or the outside diameter of the casings?

Click to expand...

With Vortex, they are labeled by the stated lens size 44mm, but they tell you what outside diameters are supported by that size. I looked up your scope online (I recommend you confirming), and the eye cap and 44mm cap should fit based on the listed outside diameters on your scope.

5 tins. They were used for testing. H&N 34 217. 1 MAG worths used. And one sealed
Javelin 34gr 218,217 gen2 about a mags worth used of each. Javelin 34 217 gen 2 half a tube left. Good to test with $60 shipped usps priority with tracking. Paypal friends and family or you add the fees

This listing has been renewed

The initial wind is always the one with the greatest influence.

swampfoxoutdoors said:

Did you build the stock?

Looks great if so. If not I need a link on where to buy.

Click to expand...

Yes, thank you. It took a LOT of shaping and sanding.

nervoustrig said:

If the mounts were the reason you're running out of elevation, swapping their positions would very likely correct it.

Also, the lateral mismatch shown in the photo is probably because the clamping plates are not oriented the same way. With many mounts, the tooth on each side is different so the mounts can be used on either a 3/8" rail or an 11mm rail.

Click to expand...

I'll be sure to try and swap them around and see if it works. Many thanks

This listing has been renewed