Threads

lonedave · Feb 23, 2024

Following....

RavenRider · Mar 15, 2024

I have the v1 and it seems to work with .177njust fine. I got tired of dead batteries so I wired it up to use a USB plug and now use a USB power pack.

drsquall · Feb 15, 2024

I am interested in the above. Let me know if you have one to sell.

Thanks
Jon

chrisct01 · Feb 29, 2024

Deadeye Dick said:
I too have a Diana 48 in .177 which is why I was interested in this article. I bought mine for the power and accuracy it afforded me.

My 48 is for sale too, Nikon scope and soft case included, if you know of anyone looking. Apparently I can't post until 10 days goes by as I'm a new member.

crowski · Feb 17, 2024

Mycapt65 said:
All good points I didn't think of.

I was absolutely leathal with mine. I was like Chuck Conor's with mine. Nothing got away. It was no Weihrauch though. Crow

Doc C. · Feb 16, 2024

liked that show. It airs occasionally. re run tv.

doc

AirNGasman · Feb 15, 2024

scotton said:
I can't figure out what rules have changed, can you expand on that?

Just a few verbiage changes/improvements in the rifle rules, but no substantive changes.

Pistol rules changes were addition of a Magnum Class and particulars about it, now 16X maximum magnification (setting) while shooting rather than 12X, no stabilizers or extended grips.

.

Dazmundo · Feb 15, 2024

Comes with 0dB moderator, single shot loader, 13 round magazine and Rowan Engineering easy single shot loader. Immaculate condition with no scratches, no leaks and transferrable warranty from Airguns of Arizona. $1000. Accept Venmo. Buyer pays shipping. Located in MA.

Selling all my PCP equipment due to relocating to the UK this June.

Savagefox · Feb 17, 2024

I guess after I finish the rear stock, I could design a piece to mount it on any GK1 without my fancy grip mod, I could use a small part of the upper rails and the back of the pistol itself, without even obstructing the rear sight. As much as I love my design, I don't think many people share the same love... but a more standard rear stock will sell better.

harrympope · Feb 15, 2024

no barrel, magazine or shroud. It has the Tim.Hill power kit and regulator he sold.
I traded for it a couple years ago and never finished the project.

$150 tyd lower 48.
paypal preferred.

Ed24 · Feb 15, 2024

I know with a 25cal mag commander at stock settings, with the power adjuster turned to the lowest setting your looking at about 28ftlb. With a .22 Mag Commander/Sniper you will get much lower then 30ftlb on the lowest power setting.

bowwild · Mar 11, 2024

This listing has been renewed

vintageairguncollector@gm · Feb 15, 2024

Guys

Looking for a Brocock 1860 air pistol, or the 1851 Navy. If you have one you are interested in selling.

Please contact me at [email protected].

Thank you

Randy

Dazmundo · Feb 15, 2024

Air Venturi Carbon Fiber Tank 100 Cu In 4500 PSI. Located in MA, can ship, buyer pays postage.

Selling all my PCP gear as I am relocating to the UK in June.

griffwyn · Mar 7, 2025

Scotay42 said:
Kinda. It still will not match the 38fpe my evanix rainstorm could do. With 21g piledriver slugs it would punch into my helium tank every shot if strait on. Reg at 180bar stil stall out at 32fpe and just wont penetrate. Wildman 21g slugs are too fat .178 and only do 22fpe at the same settings. I get a pile of shots even at 180bar, but would like to get just that bit more to help me not miss the old evanix again. This string is reg at 170bar on the reg, starting at shot 17, after adjusting the hammer spring, ran out of usable spring at 180bar after this went back to 170bar.
View attachment 435911

View attachment 435912

Have you taken the transfer grub screw out.

Dazmundo · Feb 15, 2024

GX PUMP PCP Air Compressor L3 4500Psi/320Bar/32Mpa,PCP Compressor with Dual 18V Lithium Batteries,Set Pressure & Auto-Shutoff,Paintaball Air Compressor Built-in Oil-Water Separator&Cooling Fan (as seen on Amazon). Price $220

Selling all my PCP gear as I am moving to UK this June. More equipment to come. Located in MA, can ship, buyer pays postage.

GhostRider1685 · Feb 15, 2024

If your bottle pressure is less than the set reg pressure, the gun will empty when you unscrew the bottle.

I had to replace my main valve because air was leaking out the barrel. If the reg is leaking, air will escape out of small holes on the side and bottom of the gun.

Call AOA, they will take care of you!

Kid.Shelleen · Feb 15, 2024

The Midwest Airgunners matches are usually held on the first Saturday of each month at the Fort Osage Muzzle Loaders Range, 1637 NW 550th Rd, Kingsville, MO. http://mocobps.com/FOML.htm View our Web Site for match information - http://sites.google.com/view/midwestairgunners

Shelleen posting for Brink

We had to cancel our last couple of matches because of really lousy weather but we were able to have our February Match. Very low turnout, which was probably because of the colder weather and the rain that was forecast for the day (which blew North and missed us). The wind was really tricky on match day so the scores were lower than usual.

Revoman · Feb 16, 2024

SpringerScooter

"Do you know which 2 models are made in the USA?"
I believe that it's the latest XTRIII and the XTR Pro are the only scopes made 100% in the USA.
Most, if not all of their other scopes are made in the Philippines using Japan parts (mostly). However, ALL scopes are tested in Greenley, CO.
Again, they are decent scopes with good glass. I don't own one but have looked through many.
Mike

LM22 · Feb 25, 2024

Cool old gun!

JAG1 · Mar 28, 2024

This listing has been renewed

Jammin22 · Mar 17, 2024

This listing has been renewed

dan_house · Mar 1, 2024

drpietrzak said:
Is the cocking shoe in backwards?

no. It will cock.

havent had time to get back to the shop to check if its bent or not. This week end will give some answers

Shuggoth · Feb 16, 2024

Yep some milsurp that won't fit in the safe and stuff I am cleaning up, carcanos, vetterli, swiss k31 & 11 and a m91 mosin. Some of those old long milsurp are tough to fit in safes they are so long.

sh4d0vv · Mar 7, 2024

Sqwirl57 said:
Good combo! How's it shooting for you?

Ordered everything and it should be arriving in the next week.

The 97K shoots great groups. Ordered a bunch of different pellets too to see what it prefers

Threads

Threads

GX PUMP PCP Air Compressor L3 4500Psi/320Bar/32Mpa,PCP Compressor with Dual 18V Lithium Batteries,Set Pressure & Auto-Shutoff,Paintaball Air Compressor Built-in Oil-Water Separator&Cooling Fan (as seen on Amazon). Price $220​

SpringerScooter​

Filter

GX PUMP PCP Air Compressor L3 4500Psi/320Bar/32Mpa,PCP Compressor with Dual 18V Lithium Batteries,Set Pressure & Auto-Shutoff,Paintaball Air Compressor Built-in Oil-Water Separator&Cooling Fan (as seen on Amazon). Price $220

SpringerScooter