Mine does well with the Crosman's, the domes then the the hps.

H&N Field Target Trophy

Carlos, you are stuttering again.

FLgunner said:

You really don't need a temperature gauge, There is an internal sensor attached to the head of the compressor that goes to the control board, if the temp gets above the set amount, it will shut down the compressor to prevent damage. I have a temp gauge on mine and fill 480cc tank regularly, the temp has never gotten over body temp, 98.6F! The only time it went over that was when the cooling tank got clogged and no water was flowing, even then it only got to about 106F. The only reason I have the gauge is because I'm anal!

Click to expand...

What temp gauge setup do u have?

I need one lol

My hatsans had a sharp edge around the leade. I felt it scared pellet heads loading so I tapered them for easier less damaging pellet loading . I feel it made a difference ..

Shaped eraser


Polished taper


Job well done

How about this Seb Joypod .. Just kidding..Saw a F-class shooter at the range with one of these. Very cool pod that has a joystick control for elevation and windage. Just move the joystick and it stays in place. i think they are around 1k
..he also had a Schmidt and Bender 10-60 x56 scope on his rig. His scope cost more than my last 2 rifles combined.

Hello have a m3 with a few upgrades im not using and i wanna add some cool stuff to Panthera. I would be willing to trade fro the right thing as in another panther a or a crown with a saber chassis that’s about it. 1600 plus shipping and fees. PayPal goods and services only. I have a lot of good feedback on facebook and can even video chat or what ever you would like for verification. Pm me with any questions. Gun case and a few things of ammo will be included. No scope can be included for a little extra. Has saber tactical bag rider. Bottom rail and non glused carbon liner sleeve. This gun has very minimal used and has always been stored in the case not a single scratch. Firm on price as its not a must sell item.

I just received a reply from Accu Tac regarding this question. Yes, they redesigned the bipods and relocated pan lever lock to the front. They said that some (most?) online stores have not yet updated their photos on their websites.

This listing has been renewed

Greetings AGN!

I have two hand made .22 caliber FX barrel adapters for the Taipan Veteran. I made these 2-3 years back and kept them in my personal stash. Both are made from very high quality marine brass, which I found DOES make a difference harmonically. Definitely not making any more after this, so once this ad is marked sold - please don't bother asking!

The designs are slightly different - one is low profile and the other one is stouter with a PEEK / polymer collar that faces the sleeve side. There's no difference in the overall performance with either adapter - I spent a painstaking amount of time nailing down the optimal tolerances and they both work flawlessly! I found that my FX liners performed consistently better in the Taipans than the FX rifles that I shot them with.


Terms:
* $125 shipped for the polymer collared adapter
* $110 shipped for the standard adapter
* BOTH adapters will come with a precision Delrin wrap that goes around the FX barrel sleeve to make up the +1mm in the Taipan barrel support (has the side benefit of reducing harmonics)
* Payment: Zelle preferred or discrete PayPal with 3% fees
* No trades

Seems the Vixen is in need of o-rings for the regulator and I can't find the detailed parts diagrams anywhere on the net. Does anyone know if AGT lists this anywhere since they don't bother replying to emails? EDIT: Never mind. I see Tony has them included in the Vixen repair kit. Good to know they are available.

Hi Manabeknives,

Thank you for the quick response. I currently have a DFL SUMO and am getting upwards of 90dB at 120 bar. It sounds like the Altaros might be a better match for the P3. I’ll look into this combo and provide feedback. Thanks!

klentz said:

Many FedEx and UPS locations are franchises. The franchisees can make up their own rules and many refuse to ship guns or anything resembling guns. This is the reason people mask the contents.

I used FedEx for many many years shipping air guns and PB's. Now I use pirate ship. The key is to print your own shipping label, including full insurance and drop it off and make sure you get a receipt for the drop off. No questions asked. USPS sucks for tracking and quit using them many years ago for this reason

Click to expand...

I suppose that some UPS franchise store owners might "make up" some rules, but they are subject to the restrictions of their franchise agreement, and that is the source of most of their rules. The UPS agreement specifically lists air guns as a restricted item, and they have to go through a company location.

Great shot, nice pic! Yup.....the asparagus wins!

I got this Hawke scope. IR/AO. 6-24x50. Selling cheap because I don’t need it; already have a 6-24. $215 shipped with FX dovetail no limit rings. PayPal or Zelle.

This listing has been renewed

I go thru UPS but I also know the stores owner, but I have only heard good things about Pirate ship, a friend uses Pirate ship.

Check with Bill at Target Forge. He is an authorized parts dealer for GX Pumps here in the US. If he doesn't have what you're looking for on his website, ask him if he can get them.

If anyone gets this (and Aliexpress is running 'specials' right now), please let me know. I've got 2x air guns this would/could save significant $$ over the long run, but I was just laid off and don't feel the need to test anything right now. Especially with some finicky MCX units that probably need a full rebuild just to work, according to the 'net.

Remember: See Nothing, Say Nothing, Hear Nothing. It can't bite you that way.

unfortunately my eyes limit me to about 10yds with a dot or open sight .. i miss my younger days, thats a fact

This listing has been renewed

Looking for a .30 barrel kit
Also interested in .35
Prefer pick up in SF Bay Area.

Airgun Nation Community,

All I have to say is wow, wow, and wow. Phenomenal performance from Tim Hill of Hill Airgun. I started with the "Max Power Match Parts Kit - Rifle" and figured out quickly I rather have a balance between efficiency and power and gained interest in the famous 40/40 tune with the Marauder 25 caliber. So I contacted Tim to inquire on the differences between the Max Power Kit and the Regulated Kit and he suggested I swap and add a few parts with the 262 spring (replace), and the PEEK striker (add). After adding all of your Match kit internal parts, and a huma-air regulator with integrated pressure gauge set at 130 Bar I'm able to get 56 regulated (7 magazines) shots per 3,000 PSI standard cylinder fill at an average of 40 FPE or 841 FPS with the 25.39 grain JSB pellets.

Phenomenal, and thanks again Tim Hill for not only the outstanding products but the support that goes with it! 5 out of 5 stars!

Thanks,
Don

The -010 size will usually work but be aware some of the foreign-made fittings need a metric M2x6