With the dreamtac, you can use pretty low rings and avoid the whole cheek riser thing. I use just a Magpul SL stock without the side storage. Works well for me. I have one that came with it but it is a setscrew set stock with adjustable length and cheek cheek height. It is a little heavy.

Most of my pellet orders from Amazon have been when I only wanted one tin to test a new (to me) pellet. Sometimes their shipped price can be a few bucks less than the people I would rather buy pellets from. But I agree, it is a way to get frustrated. My last pellet order was from Krale. I was ordering a scope from them I could not find in the U. S. and thought to see if the shipping changed if I added 4 tins of JSB 33.95s my P35-25 prefers. Shipping stayed the same. At the time they were less expensive by at least a couple dollars a tin versus PA and Utah and the others even with the 4 for 3 and 5 for 4 figured in. They came well packaged. Wrapped well with lots of bubble wrap. The labeling of the tins is different, however. No bar code on the bottom. Seem to shoot the same as others bought in the U. S.

How to update the firmware on a Pard NV008SLRF

Update and fix to "unable to update firmware" on NV008SLRF:

I took a 128GB MicroSD card and formatted it in a WINDOWS machine to FAT32 or EXfat, depending what your options are. Do not select NTFS.

Then I downloaded the appropriate firmware update to the ROOT directory of the SD card.

I then extracted the ZIP file to the ROOT DIRECTORY of the SD card (very important that it be in root directory!)

I then erased the ZIP file inasmuch as the .bin file has been extracted by the previous step.

Make sure that the .bin file is in the root directory (and nothing else there) of your SD card.

Use the Eject fundtion on on your computer to safely eject the MicroSD card.

With the power OFF on the NV008SLRF, insert the SD card into the NV008SLRF. Attach the type C connector cable to a power source.
You will then observe the tiny blue light near the key pads blink on and off several times.

About 1 to 2 minutes later, you should see that the NV008SLRF has powered itself on. i.e. You did not need to press power button.
Go through the menu on the scope to VERSION to confirm that you have the correct version number.

Now use the MENU to FORMAT the SD card so there is no longer anything on it.

You have now (hopefully) successfully updated the firmware.

I hope that you followed these step by step instructions carefully/completely.

I swaged some 23 grain slugs and shot them in my Gammo Fusion. They worked fine just not real fast! But they took out cottontail in the garden just fine!

This listing has been renewed

This listing has been renewed

fredcbr said:

Bonjour,je vous présente une modification que j'ai réalisée pour mes 78/79g.
Un support amovible avec un rail picatinny pour monter un point rouge sans percer la carcasse.

View attachment 451317

View attachment 451318

View attachment 451319

Click to expand...

a vendre?

beerthief said:

Power without temperature is nothing // is what google translated.

Click to expand...

Didn't see the other post. I get it. Too funny. Bill and Addi

Picked this up new at an Airgun Show 2 years ago when I was shooting springers. It was at the Pyramyd Booth and had a bad spot on the stock about the diameter of a pencil which is shown in one of the photos. I have not messed with it and it is completely stock. Accurate shooter, but is just sitting in the safe and should go to someone who will shoot it. $575.00 shipped CONUS. Feel free to PM me with any questions.

This listing has been renewed

JEFFPPC said:

Don't give up. I started out with 4 or 5. Jumped to 13 one match then back to 5 or 6. Now holding around 8 to 12 with a couple new guys getting started. Hope to get in the 12 to 15 range. Big thing is get a guy behind an airgun. We are spring guns only. Most of our guys shoot other rifle disciplines. Several ranked number 1 or 2 in the country. Several of us are long time benchrest c.f. shooters who have national experience. One common theme getting a new guy shooting the first time....I never dreamed these things could be so accurate. Keep up the good work.

Click to expand...

I have been running benchrest here for 14 years. Originally ARA then added N50 when it started. New shooters seem to lose interest when competing against top shooters. To compete at a high level whether rimfire or pcp airgun is a considerable investment that most shooters are not willing to invest in. Whereas NRL22 attracts a lot of younger shooters that can do well with lower price guns. Never can understand why more shooters are not attracted to airgun. We have no shooters interested in piston type airguns.

This listing has been renewed

Darn, I got the medium height and its literally like a sheet of paper away from fitting. I'll have to either use the low cap mags or switch to the high mount.

Posted by Gary P. for our Field Target match director, Ron Guiliano, the President of the Archery club.

Poster Note: Ron G. and Bob L. have done a terrific job cutting 15 new lanes in to the 55 acre archery course for the FT pistol course. 15 lanes because it could also be used as a second or alternate course for rifle matches. We now have 30 Field Target lanes ready for action.

We appreciate and thank them for all of their hard work.

The first official match was a 60 Shot pistol match. Normal 40 shot, 10 lane matches will take place once we have had enough pistol practice.


From Match Director Ron G:

Hello FT pistol shooters,

Below are the results of the 1st official pistol FT match at Lekatchka. We only had 5 shooters that braved the 31.4 troyer pistol course, but it turned out to be an epic day. The weather was perfect and the new wooded lanes worked out great and made for a challenging setup. Thanks to all who participated and supported our club.

PS ....... Dennis wants Chip to know his pistol worked flawless, unlike the shooter behind it

Thx, Ron G AKA EMD2

Skout-airguns said:

48.8 grain

Click to expand...

Thank you

This goes with the Maverick chart above. I ain't complaining. And I agree with the benefits of non regulated PCPs and you can learn where the sweet spot is and that first shot problems with some PCPs.

Stinker...

I have 12 tins of 22 cal. JBS Hades 15.89 grain 500 count . $18 per tin . Flat rate shipping $11 for any amount. Can pay with PayPal Text 540-309-0826

totally loved the 4/1 emails from the sponsors , A special shout out to PA , Outstanding .

You bettcha!! Drone parts!!!!

Awesome gun, but just has no practical use in my collection. Great condition. Scope has a bit of a scratch from an unknown source. See picture. Comes with all you see in the pictures. $900 OBO. Can also include a variety of .177 ammo at an agreed upon price.

Finally something I can use on my M240 AND air rifles! Been looking for ages and just about gave up on the idea! Thanks!

This listing has been renewed

puddleglum said:

Took a starling off the bluebird house this morning. I set him up as a decoy in front of the garden where the bb-house is. Maybe I’ll draw another one in.

View attachment 451228

Click to expand...

Good luck on the decoying!! If it holds true to form, you may not see another starling there again this year. They are SMART!

Pending payment


Up for sale is an excellent condition FX streamline .22 with walnut stock and included UTG 3-12 X 44 scope. Gun is in excellent condition with only a little rust on the outside of the screws for the scope rings. Gun will come with fill probe, single shot tray and I know I have one or two mags for it as well. Will update when I know for sure. Shoots 18.1 in the 880’s. Also installed a stop nut from cape fear airguns behind the hammer spring screw so it cannot move. The gun is also very accurate with crosman premier 14 gr if you turn the transfer port on medium. It will shoot the crosmans around 750 fps here if I remember correctly. I did not have luck with the crosmans above 800 fps though. On high the gun shoots jsb and baracuda 18 gr excellent. Looking for 650 shipped. Will come with original box.
Forgot: This gun has never given me a single problem. Holds air 100 %.