Threads

gendoc · Mar 2, 2024

if you have any that your not using or not happy with there performance, i got
something that likes them.
i can get them from vendors at good prices but thought i'd try here before i bought from them.
thanks for look'n......

imnewhere · Mar 2, 2024

Looking for a dreamline classic in .25 caliber

bigHUN · Apr 4, 2024

The group size between 70 yards/meters and 100 can be ... huge

cparkerfishing · Apr 9, 2024

This listing has been renewed

TYLERHASKINS2 · Mar 2, 2024

so far I am very impressed with their performance and consistency. I really do wish they were a bit cheaper, but at the same time I cannot wrap my head around how these little guys are being made so I can understand some extra cost for manufacturing. the packaging might be a little over the top but hey, not having any damaged projectiles is a huge plus.

Dogowsky · Mar 17, 2024

L.Leon said:

Nice shot and super clear video!

AirGunAction · Mar 2, 2024

Get a sticker printed with inch or cm measurements on it (Like a tape measure).

Stick the above on the side of the valve adjustment rod over the 4 lines between the gun and the start of the valve adjustment knob (See the red line for location).

That way you will know exactly what setting you are on.

mohd_wafik · Mar 2, 2024

Spartan said:
Video quality is great. Among the best I've seen.

Note the difference in how quickly they drop when your aim point was in the mid to upper chest compared to when your aim point was closer to the gut.

Thanks for sharing.

Yes u right , something happened with strelok app becouse aim point was upper than retical point in app and i didn’t notice that while im hunting

Bear-of-Grayling · Mar 2, 2024

HPP-Mechanic said:
A dragonfly3 with an adjustable trigger, barrel band, and beefy pump linkage upgrades would be an awesome gun!

That’s what I’m holding out for. With a moderator also.

Gerry52 · Mar 4, 2024

bckyrdsnpr52 said:
Who did you buy the newer from? I've been wanting a back up, but afraid of getting a clone. I'm guessing they are all made in the same place

Seller was TOPDEEP on Amazon and they offer the 4 yr extended warranty.

Emu · Mar 4, 2024

Small platic bags that goes in a second bag according with size (small, middle and big ones) that goes inside an all comprehensive third plastic bag.

That's what I have.

nomojo65 · Apr 20, 2024

Don’t forget you had loose scope rings, and you couldn’t see through the mirage

! Nice group!

DesertSilver · Mar 3, 2024

Use silicone grease for Orings. It looked like it was a very small hole you were working with so I know a sewing needle probably wouldn't have worked. I bought a dental pick set from Amazon that did the trick in a bore about that size.

qball · Mar 3, 2024

Most likely the same as previous FX gun, that’s the hole where FX drill the transfer port. The screw is a plug so just make sure it’s flush with kick tight like from the factory. Dynamic has 2 side screws to lock in/attach the barrel.

Revoman · Mar 2, 2024

Good Day AGN'ers!

Passing along a rifle that I do not need, so it's free to anyone willing to pay the shipping to get it to you.
The pump does not pressurize the air, otherwise it's in very decent shape. Lots of bluing on the barrel and the receiver, while having some very minor marks, is also in good shape.
Since it won't pump, I cannot verify that everything else functions, so ya gotta take it as is.

Mike

bucketboy · Mar 3, 2024

If you’re after a tactical looking gun, I would definitely add a Katran, a vixen or an Air Arms 510 tactical to that list. If you intend to use it for hunting then maybe look for a more traditional wooden stock, holding a hard lump of metal on a cold dark winters day can loose it’s appeal very quickly.

Bb

bucketboy · Mar 7, 2024

I had another idea this afternoon, I filled the original RAW push pin disc with a blob of solder, then lightly skimmed it on the lathe and drilled the hole to 0.4mm

Edit, the black rings are an optional illusion, must be a reflection of my phone

buddyholly · Jul 14, 2024

Nmarty9939 said:
I can’t seem to find a Huben GK1 in stock anywhere. Does anyone know when they may be available? Or let me know if you have one for sale.

3Crows · Jul 24, 2024

MongooseV8 said:
So is that a Donny Tatsu and which pic rail adapter is that? Looks nice and low.

I use a Tatsu or a Tanto typically. When I use my Jeep as a rolling blind I go bare.

The pic rail was from the "The Country Store" in Britain but I think this is it here:

Picatinny Rail - Gamo

www.gamo.com

The rail does not run full length but it works great and fits nice.

The barrel adapter was from eBay and I bonded it on after careful alignment. The carbon fiber sleeve was Amazon.

Edit to add, there is all sorts of mayhem on the internet about removing the pickle. I removed the barrel from the rifle and put it in a wooden vise. I got out my propane torch and burned it off. The heat did not hurt the barrel or finish. I used a thick pair of welding gloves and after sufficinet heat and burning of the hated plastic pickle, grabbed a hold of it and pulled it off. What is left under the now gone pickle is quite ugly thus the need of an adapter and possibly a carbon fiber sleeve. Do not cut the barrel down. The barrel has a choke in the end and is on the short side already.

Bngen3 · Mar 2, 2024

Just got an email that Crosman icons are on recall

Important Safety Information:
Recall of Crosman Icon Air Rifle

Dear Valued Crosman Customer,

Crosman has received a report of an incident involving a Crosman ICON Air Rifle. While no one was injured, Crosman has decided to recall all Crosman ICON Air Rifles. The affected Crosman Icon air rifles are the following models:

Crosman Icon .177 Caliber, Model CLI177S
Crosman Icon .22 Caliber, Model CLI22S

Our records show that you purchased an affected air rifle directly from Crosman.

We ask that you immediately stop using this product and store it in a safe location. We will be in touch after the government has approved the details of our recall.

Please contact us if you have any immediate questions. You can reach Customer Service by calling 800-724-7486, Monday - Friday, 8:00am - 4:30pm ET.

Thank you for your cooperation.
Crosman Customer Service

Ranchibi · Mar 2, 2024

Wonderful review, shooting and video!

Trucker3573 · Aug 26, 2024

shaman said:
I tried the HP models in .30 some weeks ago

Here i am shooting at 150 meters in very strong wind:

The guns are powerfull enough... AGN does not give much info about changes, but what i got is:
new regulator set at 200 bar and stronger hammer spring !

Maybe today or tomorrow I'll try the .25 models !

If that is all it is you could do this to the original v3. I know talon tunes sells a power tuned .30 that produces 100 fpe with a 500 mm compact barrel. Crazy.

UDABEGGER · Mar 2, 2024

Great Thanks! it worked

Mavshoots · Jun 5, 2025

mubhaur said:
A US based user asked me to make an inline plenum for his longer stock RAW HM1000X. But I didn't have complete specs of his after market stock.

Whatever was provided to me, I made the plenum according to those specs.

He got the chance now to install it but found that there are some differences in actual specs of stock due to which the initially sent plenum is useless.

Now I plan to make one more as now I have got better specs.

Pics are hereunder.

View attachment 441472 View attachment 441471 View attachment 441470

Morning all - as a proud Owner of an hm1000x I am looking for advice. My goal is to swap from the buddy bottle system onto a main tube modification for the air reservoir. This way I get a rifle that matches my other target rifles and also gives way to being able to fully shroud the barrel also without need for threaded moderator on the end.

Who can offer advice on having a main tube made to fit and replacing the buddy bottle altogether. I’ve scoured the net for days to no avail
Kind regards

Mav

MartinT · Mar 13, 2024

Revoman said:
Are ya looking for one of these?

Hunting Rubber Eyepiece Protector Extender Scope Eyeshade Fit 38mm to

Feature: --Providing Ample Flexibility as Comfortable Cushion and Protection Against Recoil--Made from Hight Quality Silica gel but not poor rubber, 100% No smell,No poison,No harmful to your skin.--Exclusive designed for fitting 38mm-48mm diameter of the eyepiece.--Designed to Fit Scopes with...

www.discoveryriflescopes.com

OR....

Discovery Optics Silca Gel Eyeshade For 38mm to 48mm Eye Piece OD's

Brand Name: DiscoveryType: RIFLEFunction: LensModel Number: EyeshadeMaterial: Medical Silica gelFit Scope Eyepiece: from 38mm to 48mmColor: Black The Discovery Eyeshade is made of Medical grade Silca Gel, not rubber. Silica gel is tear resistant, temperature resistant and has no odor...

airgunopticsplus.com

Mike

In the links above $46 (tax included!) or $19,99 via the second link, that's a steal! Of your money, that is...
I know it's a free world and all, but this seems ridiculous.

(note: I'm NOT bashing Revoman here, he's just the messenger, and he made the search for the item a little easier.)

The stores behind the above links seem like a ripoff, see below...

Threads

Threads

Important Safety Information: Recall of Crosman Icon Air Rifle​

Filter

Important Safety Information:
Recall of Crosman Icon Air Rifle