I am looking for a FX Panthera Top Rail Support Block. If you've purchased a Saber Tactical Rail you probably have an extra as one comes with the kit.

#24 - This is the part I'm Looking For

To clarify my statement about front sight inserts, and what fits.

Marflow is correct that the 16mm inserts, or old style Walther inserts, fit the 75 front sight regardless of if it is a 75 or a 75 TO1.
The spring loaded insert to hold the stamped element has a very small recess in its front edge that the 16mm insert fits into. The 18mm inserts will also fit, but they are held centrally by the ID of the front sight globe itself and subject to rotation or misalignment. The 18mm clear acrylic inserts will fit the front sight element holder if they are the ones that have the reduced diameter lip. That reduced diameter lip will recess into the element holder and center the insert.

While the 18mm inserts will work, to be correct, the 16mm inserts are what is intended to be used across the board.

I checked this against my rifle, to be sure that the info was correct, and just as Marflow stated, it is correct.
Sorry for muddying the waters......

The TULSA CREW would like to welcome you to a “dress rehearsal” match this Saturday March 9th.

NO match fees for this match.

Come help us do a 60 shot / 15 lane shake down Match. AAFTA rules apply.

Gates open at 9AM, Match time 10:30.

Tulsa Gun Club is at: 8888 Mohawk Blvd, Tulsa, OK

Follow the road South around the club house and next to the skeet field.

Or: Search Google maps for “Tulsa Gun Club Eagle Ops Rally point”

This will take you to the parking area.



Match Director is Curtis Nelson.

All rifles must be in a case or carrier when moving between lanes.

Appropriate eye protection is required.



Thanks,

Curtis Nelson

[email protected]

918-691-5872

This listing has been renewed

a little lubrication works wonders,,, experience is such a good teacher

ya ever try and cut up an old tire with a razor knife? a little WD40 makes it go a LOT smoother,,, as rubber likes to grab hold of metal
remember when you inflated a football/basketball, ya licked the needle to get to go in easier

and a little silicone oil on your magazine's o-ring,,, what about your breech or probe o-rings, ya cut them off also,, ,

This listing has been renewed

Lot's of fun airgun links to prop rigs & other.
Hard an "Arrow Stealth" (swivelmachineworks) for $600 in '97 found at the archery store. Heck of a fine arrow launcher -as in same point of aim will cost you 1-2 arrows- but NOT a .25 airgun that could hit a shoe box at 20 yards.
Anyway,


John

I took the thermal to the range yesterday and gave it a good rundown.

The red-dot portion is pretty much like any Holosun variable-reticle red-dot. I like how you can "roughly" zero the thermal reticle by setting it to match the red dot. I find you can't get them quite perfectly matched this way as the human eye can't discern such fine variations. But you can get pretty close by matching the two.

Interestingly I find I shoot a little better with the green thermal site than the red dot. Maybe that's my mild astigmatism causing that problem.

brand new rifle gun has had 7 inchs took off air tube unbolted pendum and removed reg needs barrle crowned and threaded to go back togeterher has factory ldc also and factory mag

I have seen some where people that mount it directly on the compressor

My question is does/would the vibrations affect the way it separates water

On mine I have a lag bolt holding it on my bench but it’s not ideal

Thought of maybe a Christmas tree stand some how

Thoughts/ Ideas?

Thanks

Thanks marflow777!!

This listing has been renewed

two proud hunters.
Nice work. I have never hunted them. It seems like it would be
fun.
Thanks for sharing.

doc

I have 3 brand new tins, 1 old tin of jsb pellets(80% full), old tin of .35 grizzly (90% full) and 1 Benjamin bulldog mag for $45 shipped

*also have a brand new box of Umarex .510 550 grain slugs for an additional $10

View attachment IMG_0012.jpeg

This listing has been renewed

This is a Sarissa in .30-357 with 1/2-20 threads. Comes with original box. Has some minor scratches. $115 shipped. PayPal, Venmo, Zelle, or usps money order.

View attachment IMG_0009.jpeg
View attachment IMG_0010.jpeg
View attachment IMG_0011.jpeg

Nicole seems to be on the ball and she regularly monitors this forum site. Hopefully, you get what you need....soon!
Mike

2to 5 %

Reminds me a lot of the mrad bag rider!

Stepped down to a little UTG 4-16 which better suits my informal needs. This scope is like new, with the faintest of scope ring marks (you can see them in the photo) and comes with the box and all the papers and accessories. It also comes with a JDS Custom nautilus parallax wheel made to fit the Helix parallax knob, plus the scope level he includes with his wheels. $300 shipped insured.

Stormin-Normin said:

I did that and have not heard back.

It may be a 2017 but Weihrauch replied this morning with an email (so surprised they responded so quickly), they apologized for the inconvenience and are sending one immediately. Whew!

Click to expand...

Awesome man! Guess thats why they've been in business for almost 150yrs

Anyone try the Umarex Glock 19 for this sort of practice? Is it accurate enough to be worth it?

This was sent to me brand new. I only used it about 5-10 times when my Yong Heng was out. I don't need it, so I'm looking for a good home for it. As new. Never used outside.

$399 free shipping. Paypal OK. Nate @ 360-844-0962 or PM me here. Email is [email protected]

View attachment 443330View attachment 443329View attachment 443331View attachment 443333View attachment 443334View attachment 443335

This listing has been renewed

Matchstickshooter said:

Look on You Tube, there is an instruction video on how it's done.

Click to expand...

Just realized this is an old thread.....
But here's the info on replacement