Hi @Jim D. Those are very good tips. Thank you. I'll play with the setting and pellets. And on my marksmanship.

Vacendack said:

If you want to try 3D print i made a model for it. you can find it in https://www.printables.com/model/989139-daisy-powershot-717-rear-sight

Click to expand...

Nice! Did you print it and put it on your 717/747? If yes, did it work OK?

FYI. Update . Rifle was returned and is work as it should , the 2 issues i had was. The orignal issues was the little reg screw o-rings and the second issue was when i changed out the reg to a new kit it damaged the seal in the body as advised above. They have sent it back with 135 bar and it shooting a little low compared to my setting before so im back to adjusting things again .
FX didn't charge me anything to fix or any postage ,so thats great service .
Thank you to all that gave advise .

A collection of .25 cal pellets. Don't have the rifle for it so they need to go. I think all but 1 or two tins are sealed, and the open one is essentially full.

$125. Buyer pays shipping to destination, but prefer face to face in Washington.

Pretty straight forward, Benjamin .22 Cal Marauder PCP Air Rifle. $450.00

Holds pressure at 3000 PSI. Integral "moderator". Sighted it in at 25 yards.

Come with:
-two 10 shot magazines
-4-16x50-ish scope
- Hill Air manual pump
-some .22 cal pellets, about 700
-an expired SCBA air bottle, valve, and a filler tube.

Decided that I want to upgrade from the .22 cal PCP gun I got a little while ago.

Prefer local sale in Washington so I can just do a direct hand-off and not have to ship. Buyer pays shipping charges if it must be shipped.

@Poke-E Plenty of AGN members have dealt with him. He is known for tuning the Kalibrgun Cricket very well and other Eastern European guns. I bought an Evol that he tuned. The numbers he posted matched my personal chronograph numbers very closely. He’s also a helluva a competitive shooter. I’ve been around the forums long enough to trust the older members that know him and have dealt with him in addition to other members that I’m not acquainted with who speak highly of him on the AGN forums. I’ve never done business with him but he’s helped me personally when I’ve reached out to him and he has numerous helpful posts on the forums. Please, don’t just take my word for it. Look him up using the AGN search feature either by Derick Wall or @zx10wall and see what other members have said about their experiences with him.

I used this base for my Sightmark Wraith and day optics for my Airgun s. It is a tank....Zero problems... It's nice to have a centered screen....

LndscpeGrdnr said:

Well today was supposed to be the day. Have you heard anything on your pre-order?

Click to expand...

We'll see soon enough.

I’m not offended, I was just looking for more information than I have about the this Caliber. I have theories of my own and curious what owners and users think essentially for longer ranges.

AirMarksman 700cc Carbon Fiber Bottle w/Valve 300bar - $250 shipped (conus) - PP F&F, Venmo, Zelle, Cash App

Here's my new Caiman X. They call this Forest Laminate.

I had this on the last 2 HW50s I took out of the box. After the tune kits were installed, the scopes didn't have enough elevation to sight in. The droop was obvious just looking down the side of the stock along the barrel. Simply centered the scope and bent the barrel in the crook of a tree til impacts were hitting near the crosshairs. All done. Normally I would use a scope mount with some droop built in, but both of these rifles were getting scopes too short for a one piece mount.

Dawgfish said:

Good points. Have never heard of HEU's. I cull elk for the state and am a big believer in an accurate rifle more than a powerful one, shooting 35 elk in the past 6 years, mostly with a 110 gr 6.8 SPC Barnes TTSX, but a pellet rifle isn't shooting a monolithic copper bullet.

Really leaning towards the .356/9mm.

Click to expand...

I salute anybody that knows how to package a barrel and doesn't skimp! cra627 sent me an FX liner inside a PVC tube (well protected with foam) inside a cardboard tube!

Excellent sale!

Anyone have one for sale?
TIA,
Zeke

About 60 shots on the new seal and I'm up 10fps over yesterday already. Approximately same weather conditions so I think the seal is actually breaking in. My gun only ever made about 900fps with 10.3s so we're still a hair shy of my original velocity but not enough for me to worry. Like I said its only been about 60 shots. It is consistent as can be though.

Emjay4248 said:

Hi, I am interested in your pellets, but I can’t seem to PM you directly from your classified. Have you shot these through the GK1. And if you have, are they accurate

Click to expand...

To be specific, I am interested in the .253 slugs that you have for sale for the gk1

That's a great idea!

I was thinking about just welding an empty one closed, but all I have is a stick welder and 3/32" rod. That's more of a TIG kinda project. Maybe drill and tap the end of one, loc-tite a screw into it, then grind it down a little.

My Dad is a retired tool and die maker and it would be good to get some shop time in with him. He enjoys it too. He still laughs at some of the stuff I come up with (and that's okay).

Cheers,

Jeff

be gentle with the cocking levers of the LELYA there are springs inside that are almost impossible to find in the market . and another important detail , do not hold the levers closed with your hands while shooting ,also do not put slugs in the magazine and tilt the riffle upwards they will fell in the guns action and might cause damage

This listing has been renewed

Need a basic slug pin probe for my M3 in .22 cal

This listing has been renewed

Frank in Fairfield said:

$250.00 + S&H

Click to expand...

TY!

shambozzie said:

Give John a call.

View attachment 456819

Click to expand...

When I bought my D54 I was not happy with it at all. I had John Thomas tune it, he cut the groups in half. It was now shootable but not what I wanted. This is when I added the tuner. I have been shooting tuners on my PB benchrest guns for about 15 years. They will improve how any rifle shoots in my experience. Tuning the harmonics of your barrel to a particular pellet is always a plus and not attainable by any other method that I am aware of, especially a spring Airgun.